A dynamic condensation method using algebraic substructuring

In this paper, we develop a robust reduced‐order modeling method, named algebraic dynamic condensation, which is based on the improved reduced system method. Using algebraic substructuring, the global mass and stiffness matrices are divided into many small submatrices without considering the physical domain, and substructures and interface boundary are defined in the algebraic perspective. The reduced model is then constructed using three additional procedures: substructural stiffness condensation, interface boundary reduction, and substructural inertial effect condensation. The formulation of the reduced model is simply expressed at a submatrix level without using a transformation matrix that induces huge computational cost. Through various numerical examples, the performance of the proposed method is demonstrated in terms of accuracy and computational cost. Copyright © 2016 John Wiley & Sons, Ltd.

[1]  R. Lin,et al.  A new iterative order reduction (IOR) method for eigensolutions of large structures , 2004 .

[2]  Zhaojun Bai,et al.  An Algebraic Substructuring Method for Large-Scale Eigenvalue Calculation , 2005, SIAM J. Sci. Comput..

[3]  F. Bourquin,et al.  Component mode synthesis and eigenvalues of second order operators : discretization and algorithm , 1992 .

[4]  George Karypis,et al.  A Software Package for Partitioning Unstructured Graphs , Partitioning Meshes , and Computing Fill-Reducing Orderings of Sparse Matrices Version 5 . 0 , 1998 .

[5]  Matthew Frederick Kaplan.  Implementation of automated multilevel substructuring for frequency response analysis of structures , 2001 .

[6]  K. Bathe,et al.  A continuum mechanics based four‐node shell element for general non‐linear analysis , 1984 .

[7]  Bruce Hendrickson,et al.  Effective Sparse Matrix Ordering: Just Around the BEND , 1997, PPSC.

[8]  Noureddine Bouhaddi,et al.  A method for selecting master DOF in dynamic substructuring using the Guyan condensation method , 1992 .

[9]  Z. Qu,et al.  Dynamic condensation methods for viscously damped models , 2000 .

[10]  R. D. Henshell,et al.  Automatic masters for eigenvalue economization , 1974 .

[11]  R. Guyan.  Reduction of stiffness and mass matrices , 1965 .

[12]  Noureddine Bouhaddi,et al.  Substructuring by a two level dynamic condensation method , 1996 .

[13]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[14]  Luis E. Suarez,et al.  Dynamic condensation method for structural eigenvalue analysis , 1992 .

[15]  Maenghyo Cho,et al.  Improvement of reduction method combined with sub‐domain scheme in large‐scale problem , 2007 .

[16]  Maenghyo Cho,et al.  Iterative method for dynamic condensation combined with substructuring scheme , 2008 .

[17]  S. Rubin.  Improved Component-Mode Representation for Structural Dynamic Analysis , 1975 .

[18]  B. Irons.  Eigenvalue Economisers in Vibration Problems , 1963, The Journal of the Royal Aeronautical Society.

[19]  Jin-Gyun Kim,et al.  Error estimation for the automated multi‐level substructuring method , 2016 .

[20]  Richard B. Lehoucq,et al.  An Automated Multilevel Substructuring Method for Eigenspace Computation in Linear Elastodynamics , 2004, SIAM J. Sci. Comput..

[21]  A. George.  Nested Dissection of a Regular Finite Element Mesh , 1973 .

[22]  Edward J. Kuhar,et al.  Dynamic Transformation Method for Modal Synthesis , 1974 .

[23]  Noureddine Bouhaddi,et al.  Substructuring using a linearized dynamic condensation method , 1992 .

[24]  W. A. Benfield,et al.  Vibration Analysis of Structures by Component Mode Substitution , 1971 .

[25]  Phill-Seung Lee,et al.  The MITC3+shell element and its performance , 2014 .

[26]  K. Bathe,et al.  Development of MITC isotropic triangular shell finite elements , 2004 .

[27]  W. Hurty.  Dynamic Analysis of Structural Systems Using Component Modes , 1965 .

[28]  Jin-Gyun Kim,et al.  An enhanced AMLS method and its performance , 2015 .

[29]  F M.I..  MODEL REDUCTION USING DYNAMIC AND ITERATED IRS TECHNIQUES , .

[30]  Jin-Gyun Kim,et al.  A simplified error estimator for the CB method and its application to error control , 2016 .

[31]  R. Macneal.  A hybrid method of component mode synthesis , 1971 .

[32]  J. H. Ong.  Improved automatic masters for eigenvalue economization , 1987 .

[33]  Robert L. Kidder,et al.  Reduction of structural frequency equations. , 1973 .

[34]  M. Bampton,et al.  Coupling of substructures for dynamic analyses. , 1968 .