Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr2AlC-Ti system

[1]  G. Turichin,et al.  Direct energy deposition of SiC reinforced Ti–6Al–4V metal matrix composites: Structure and mechanical properties , 2022, Ceramics International.

[2]  Yi Sun,et al.  In-situ modulating laminated microstructure of α+β+TiC in titanium composites by laser powder bed fusion of Mo2C/Ti powder mixture towards biomedical applications , 2022, Materials Science and Engineering: A.

[3]  Qun Yu,et al.  Microstructure and properties of TiCx/TC4 Composites with a Quasi-Network Structure Prepared by the Decomposition of the Ti2AlC Precursor , 2022, Journal of Alloys and Compounds.

[4]  W. Huo,et al.  Superior strength-ductility synergy of (TiC + Ti5Si3)/Ti composites with nacre-inspired architecture , 2022, Composites Part B: Engineering.

[5]  L. Wang,et al.  The effect of TiC on microstructure and mechanical properties of Ti-5553 beta phase titanium alloy , 2022, Materials & Design.

[6]  Shoufeng Yang,et al.  In-situ formation of Ti-Mo biomaterials by selective laser melting of Ti/Mo and Ti/Mo2C powder mixtures: A comparative study on microstructure, mechanical and wear performance, and thermal mechanisms , 2022, Journal of Materials Science & Technology.

[7]  Hongmei Zhang,et al.  Breaking through the dynamic strength-ductility trade-off in TiB reinforced Ti composites by incorporation of graphene nanoplatelets , 2021, Composites Part B: Engineering.

[8]  S. H. Seyedein,et al.  Production of Ti-CNTs surface nanocomposites for biomedical applications by friction stir processing: Microstructure and mechanical properties , 2021 .

[9]  Changjun Han,et al.  Laser powder bed fusion of Mo2C/Ti-6Al-4V composites with alternately laminated α′/β phases for enhanced mechanical properties , 2021 .

[10]  Y. Lin,et al.  Effects of Mo and Cr contents on microstructures and mechanical properties of near β-Ti alloy , 2021 .

[11]  Qun Yu,et al.  In-situ hybrid Cr3C2 and γ′-Ni3(Al, Cr) strengthened Ni matrix composites: Microstructure and enhanced properties , 2021, Materials Science and Engineering: A.

[12]  Yuanfei Han,et al.  Embedding boron into Ti powder for direct laser deposited titanium matrix composite: Microstructure evolution and the role of nano-TiB network structure , 2021 .

[13]  Hongmei Zhang,et al.  Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design , 2021, Composites Part B: Engineering.

[14]  Jasper Dong Qiu Chua,et al.  Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders , 2020 .

[15]  Rui Zhang,et al.  Multiscale Architecture and Superior High‐Temperature Performance of Discontinuously Reinforced Titanium Matrix Composites , 2020, Advanced materials.

[16]  Farhad Saba,et al.  Mechanical properties and strengthening mechanisms of titanium matrix nanocomposites reinforced with onion-like carbons , 2020, Composites Part A: Applied Science and Manufacturing.

[17]  J. Yeom,et al.  Relationship between phase stability and mechanical properties on near/metastable β-type Ti–Cr-(Mn) cast alloys , 2020 .

[18]  N. Silvestre,et al.  CNT-reinforced iron and titanium nanocomposites: Strength and deformation mechanisms , 2020 .

[19]  Ding-shun She,et al.  Enhanced oxidation and graphitization resistance of polycrystalline diamond sintered with Ti-coated diamond powders , 2020 .

[20]  Lin Liu,et al.  Understanding on toughening mechanism of bioinspired bulk metallic glassy composites by thermal spray additive manufacturing , 2020 .

[21]  Yimin Gao,et al.  Microstructure, mechanical properties and strengthening mechanisms of in-situ prepared (Ti5Si3 + TiC0.67)/TC4 composites , 2019, Journal of Alloys and Compounds.

[22]  Tengfei Liu,et al.  Reinforcement size dependence of mechanical properties and strengthening mechanisms in diamond reinforced titanium metal matrix composites , 2019, Composites Part B: Engineering.

[23]  P. Rivera-Díaz-del-Castillo,et al.  Modelling strengthening mechanisms in beta-type Ti alloys , 2019, Materials Science and Engineering: A.

[24]  Tengfei Liu,et al.  Nanodiamonds reinforced titanium matrix nanocomposites with network architecture , 2019, Composites Part B: Engineering.

[25]  C. Yan,et al.  In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms , 2019, Composites Part B: Engineering.

[26]  W. M. Rainforth,et al.  Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate , 2018, Acta Materialia.

[27]  Wenqiang Hu,et al.  In-situ TiC and γ′-Ni3(Al,Ti) triggered microstructural modification and strengthening of Ni matrix composite by reactive hot-press sintering pure Ni and Ti2AlC precursor , 2018 .

[28]  J. Eckert,et al.  Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion , 2018 .

[29]  Jun Zhu,et al.  First-principles study of structural phase transition, electronic, elastic and thermodynamic properties of C15-type Laves phase TiCr 2 under pressure , 2018 .

[30]  Di Zhang,et al.  Fabrication of an in-situ Ti-2.6vol%TiC metal matrix composite by thermomechanical consolidation of a TiH2-1vol%CNTs powder blend , 2016 .

[31]  P. Rivera-Díaz-del-Castillo,et al.  Modelling solid solution hardening in high entropy alloys , 2015 .

[32]  M. Mohammed,et al.  Beta Titanium Alloys: The Lowest Elastic Modulus for Biomedical Applications: A Review , 2014 .

[33]  Yanchun Zhou,et al.  A first-principles investigation of the phase stability of Ti(2)AlC with Al vacancies , 2008 .

[34]  J. Emmerlich,et al.  Thermal stability of Ti3SiC2 thin films , 2007 .

[35]  M. Barsoum,et al.  The topotactic transformation of Ti{sub 3}SiC{sub 2} into a partially ordered cubic Ti(C{sub 0.67}Si{sub 0.06}) phase by the diffusion of Si into molten cryolite , 1999 .

[36]  A. Deruyttere,et al.  Multi-component intrinsic solid solution softening and hardening , 1977 .

[37]  Bin Liu,et al.  Effect of TiC content on the microstructure and mechanical properties of Ti-30Mo-xTiC composites , 2022, International Journal of Refractory Metals and Hard Materials.

[38]  W. Duan,et al.  First principles investigation of mono-vacancy defective properties of Cr2AlC , 2019, Physica B: Condensed Matter.

[39]  S. R. Bakshi,et al.  Effect of C/Ti ratio on densification, microstructure and mechanical properties of TiCx prepared by reactive spark plasma sintering , 2018 .

[40]  Michel W. Barsoum,et al.  The MN+1AXN phases: A new class of solids , 2000 .

[41]  K. Kondoh,et al.  Improved mechanical properties in titanium matrix composites reinforced with quasi-continuously networked graphene nanosheets and in-situ formed carbides , 2022 .