Surface Modification of Microbial Fuel Cells Anodes: Approaches to Practical Design

[1]  C. Santoro,et al.  Parameters characterization and optimization of activated carbon (AC) cathodes for microbial fuel cell application. , 2014, Bioresource technology.

[2]  Catalytic biofilm formation by Shewanella oneidensis MR-1 and anode characterization by expanded uncertainty , 2014 .

[3]  C. Santoro,et al.  The effects of carbon electrode surface properties on bacteria attachment and start up time of microbial fuel cells , 2014 .

[4]  Baikun Li,et al.  Electrochemical behavior of stainless steel anodes in membraneless microbial fuel cells , 2014 .

[5]  C. Santoro,et al.  Activated carbon nanofibers (ACNF) as cathode for single chamber microbial fuel cells (SCMFCs) , 2013 .

[6]  T. Vadas,et al.  Current generation in membraneless single chamber microbial fuel cells (MFCs) treating urine , 2013 .

[7]  Chris Melhuish,et al.  Increased power output from micro porous layer (MPL) cathode microbial fuel cells (MFC) , 2013 .

[8]  Chris Melhuish,et al.  Waste to real energy: the first MFC powered mobile phone. , 2013, Physical chemistry chemical physics : PCCP.

[9]  C. Santoro,et al.  Cathodic and anodic biofilms in Single Chamber Microbial Fuel Cells. , 2013, Bioelectrochemistry.

[10]  Jurg Keller,et al.  Effects of surface charge and hydrophobicity on anodic biofilm formation, community composition, and current generation in bioelectrochemical systems. , 2013, Environmental science & technology.

[11]  Hongyu Wang,et al.  Electrochemical surface modification of carbon mesh anode to improve the performance of air-cathode microbial fuel cells , 2013, Bioprocess and Biosystems Engineering.

[12]  Seetha S Manickam,et al.  Power generation and organics removal from wastewater using activated carbon nanofiber (ACNF) microbial fuel cells (MFCs) , 2013 .

[13]  Ioannis Ieropoulos,et al.  The first self-sustainable microbial fuel cell stack. , 2013, Physical chemistry chemical physics : PCCP.

[14]  C. Santoro,et al.  Power generation of microbial fuel cells (MFCs) with low cathodic platinum loading , 2013 .

[15]  C. Santoro,et al.  Evaluation of Water Transport and Oxygen Presence in Single Chamber Microbial Fuel Cells with Carbon-Based Cathodes , 2013 .

[16]  R. Rocheleau,et al.  Multianalytical Study of the PTFE Content Local Variation of the PEMFC Gas Diffusion Layer , 2013 .

[17]  C. Santoro,et al.  High Power Generation by a Membraneless Single Chamber Microbial Fuel Cell (SCMFC) Using Enzymatic Bilirubin Oxidase (BOx) Air-Breathing Cathode , 2013 .

[18]  Junliang Yang,et al.  Coupling of anodic and cathodic modification for increased power generation in microbial fuel cells , 2012 .

[19]  K. Artyushkova,et al.  Structure-to-property relationships in fuel cell catalyst supports: Correlation of surface chemistry and morphology with oxidation resistance of carbon blacks , 2012 .

[20]  K. Artyushkova,et al.  Use of digital image processing of microscopic images and multivariate analysis for quantitative correlation of morphology, activity and durability of electrocatalysts , 2012 .

[21]  C. Santoro,et al.  Power generation from wastewater using single chamber microbial fuel cells (MFCs) with platinum-free cathodes and pre-colonized anodes , 2012 .

[22]  Plamen Atanassov,et al.  Mechanistic study of direct electron transfer in bilirubin oxidase , 2012 .

[23]  Hongyu Wang,et al.  Anode modification by electrochemical oxidation: a new practical method to improve the performance of microbial fuel cells. , 2012 .

[24]  P. Liang,et al.  Recent progress in electrodes for microbial fuel cells. , 2011, Bioresource technology.

[25]  B. Lim,et al.  Removal of Hg2+ as an electron acceptor coupled with power generation using a microbial fuel cell. , 2011, Bioresource technology.

[26]  Derek R. Lovley,et al.  Application of cyclic voltammetry to investigate enhanced catalytic current generation by biofilm-modified anodes of Geobacter sulfurreducens strain DL1 vs. variant strain KN400 , 2011 .

[27]  Yujie Feng,et al.  Effect of nitrogen addition on the performance of microbial fuel cell anodes. , 2011, Bioresource technology.

[28]  Ping Li,et al.  Improved performance of membrane free single-chamber air-cathode microbial fuel cells with nitric acid and ethylenediamine surface modified activated carbon fiber felt anodes. , 2011, Bioresource technology.

[29]  Zhen He,et al.  Efficient salt removal in a continuously operated upflow microbial desalination cell with an air cathode. , 2011, Bioresource technology.

[30]  H. Abdi,et al.  Principal component analysis , 2010 .

[31]  Bruce E. Logan,et al.  Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells , 2010 .

[32]  Baikun Li,et al.  Optimizing energy harvest in wastewater treatment by combining anaerobic hydrogen producing biofermentor (HPB) and microbial fuel cell (MFC) , 2010 .

[33]  Baikun Li,et al.  Granular activated carbon single-chamber microbial fuel cells (GAC-SCMFCs): A design suitable for large-scale wastewater treatment processes , 2009 .

[34]  Antonio Rinaldi,et al.  Engineering materials and biology to boost performance of microbial fuel cells: a critical review , 2008 .

[35]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.

[36]  Pablo Cañizares,et al.  Production of electricity from the treatment of urban waste water using a microbial fuel cell , 2007 .

[37]  K. K. Prasad,et al.  Application of Modified Carbon Anodes in Microbial Fuel Cells , 2007 .

[38]  Jae Kyung Jang,et al.  Continuous determination of biochemical oxygen demand using microbial fuel cell type biosensor. , 2004, Biosensors & bioelectronics.

[39]  D. Park,et al.  Electricity Generation in Microbial Fuel Cells Using Neutral Red as an Electronophore , 2000, Applied and Environmental Microbiology.