Overview of Laser Ablation Micropropulsion Research Activities at DLR Stuttgart

Microthrust engines (μN-mN) with high specific impulse and long lifetime that allow for precision attitude and orbit control are a prerequisite for planned and future missions for geodetic purposes or astronomic science. The potential of laser-ablative microthrusters for meeting these demands is being investigated at the Institute of Technical Physics. The concept is based on removal of a thin layer of material by focusing short laser pulses on a metal surface creating plasma or vapor. The recoil of the ablated material leads to momentum transfer to the target, which results in sub-μN to mN thrust levels for high repetition rate laser sources. Additionally, by implementing electro-optic beam steering for layer-by-layer ablation of material, moving parts that can be a significant disturbing factor for precise thrusters could be avoided in this concept. To evaluate and optimize the thruster with regards to precise thrust control, thruster lifetime and contamination issues experimental facilities comprising plasma and surface diagnostics and a thrust balance have been implemented. In addition to the experimental work, analytical calculations are undertaken to assess the future laser thruster characteristics. Furthermore, the variation of laser parameters and target material is investigated using a hydrodynamic simulation tool for laser ablation, which is to be supplemented by molecular dynamics simulations as well as by Direct Simulation Monte Carlo-Particle in Cell (DSMC-PIC) calculations in cooperation with the University of Stuttgart.

[1]  R. F. Harrison,et al.  Impulse coupling to targets in vacuum by KrF, HF, and CO2 single‐pulse lasers , 1988 .

[2]  Claude R. Phipps,et al.  Performance Test Results for the Laser-Powered Microthruster (PREPRINT) , 2005 .

[3]  S. Edwardson,et al.  Effects of laser operating parameters on metals micromachining with ultrafast lasers , 2009 .

[4]  T. van Zoest,et al.  Applications of Microthrusters for Satellite Missions and Formation Flights Scenarios , 2011 .

[5]  Ashok Vaseashta,et al.  Functionalized Nanoscale Materials, Devices and Systems , 2008 .

[6]  O. Rosmej,et al.  Dynamics of thin metal foils irradiated by moderate-contrast high-intensity laser beams , 2012 .

[7]  Claude Phipps,et al.  An Alternate Treatment of the Vapor-Plasma Transition , 2011 .

[8]  Stefan Scharring,et al.  Tailoring Laser Propulsion for Future Applications in Space , 2010 .

[9]  Stephanie Karg,et al.  Investigation of Laser-Ablative Micropropulsion as an Alternative Thruster Concept for PreciseSatellite Attitude and Orbit Control , 2013 .

[10]  W. Helgeson,et al.  A ns‐Pulse Laser Microthruster , 2006 .

[11]  Stefan Scharring,et al.  Laser ablation investigations for future microthrusters , 2012 .

[12]  Kazuo Fujiura,et al.  Wide-angle, low-voltage electro-optic beam deflection based on space-charge-controlled mode of electrical conduction in KTa1−xNbxO3 , 2006 .

[13]  Steffen Sonntag,et al.  Computer simulations of laser ablation from simple metals to complex metallic alloys , 2011 .

[14]  Stefan Scharring,et al.  Open Access Tools for the Simulation of Ultrashort-Pulse Laser Ablation , 2014 .

[15]  Cai Jian,et al.  Experimental and Numerical Investigation of Propellant of Different Thickness for Laser Micro Propulsion , 2010 .

[16]  Trevor Moeller,et al.  MACH2 simulations of a micro laser ablation plasma thruster , 2007 .

[17]  Daniel Johannes Förster.  Validation of the software package IMD for molecular dynamics simulations of laser induced ablation for micro propulsion , 2013 .

[18]  Osamu Tatebe,et al.  Numerical simulation of shockwave by KrF laser ablation , 2001, European Conference on Laser Interaction with Matter.

[19]  D. Batani,et al.  Laser Ablation and Laser Induced Plasmas for Nanomachining and Material Analysis , 2008 .

[20]  Hans-Albert Eckel,et al.  Laser Propulsion Research Facilities at DLR Stuttgart , 2014 .