Harmonic Current Compensation of PMSM Based on Disturbance Observer and Robustness Analysis

Due to the influences of rotor flux harmonics and nonlinear characteristics of the inverter, high-order harmonic components are contained in the stator current, which results the torque ripples. This disadvantage limits the application of proportional integral controller in synchronous coordinate system in high performance drive system. To solve the problem, firstly, this paper models and analyzes the disturbance in PMSM. The results show that the performance of the motor is mainly affected by the periodic high-order harmonic current. Secondly, a disturbance observer based on band pass filter is designed to estimate the periodic disturbance in the system, and the harmonic current is compensated by internal feedback. Then, design principle of the observer parameter is given. Finally, the simulation model is built. The results verify the correctness, effectiveness and robustness of the proposed method.

[1]  I. Husain,et al.  Permanent Magnet Synchronous Motor Magnet Designs with Skewing for Torque Ripple and Cogging Torque Reduction , 2007, 2007 IEEE Industry Applications Annual Meeting.

[2]  Hao Zhu,et al.  Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors , 2012, IEEE Transactions on Industrial Electronics.

[3]  Sang-Yong Jung,et al.  Cogging Torque Minimization and Torque Ripple Suppression in Surface-Mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths , 2013, IEEE Transactions on Magnetics.

[4]  He Yi-kang.  Analysis and Compensation of AC Servo System on Inverter Dead-time Effect , 2008 .

[5]  Tang Xin-zhou.  Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter , 2006 .

[6]  Shaotang Chen,et al.  Controller induced parasitic torque ripples in a PM synchronous motor , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[7]  Patrice Wira,et al.  A Self-Learning Solution for Torque Ripple Reduction for Nonsinusoidal Permanent-Magnet Motor Drives Based on Artificial Neural Networks , 2014, IEEE Transactions on Industrial Electronics.

[8]  Thomas M. Jahns,et al.  Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[9]  Abraham Gebregergis,et al.  Modeling of Permanent-Magnet Synchronous Machine Including Torque Ripple Effects , 2013, IEEE Transactions on Industry Applications.

[10]  Shinji Doki,et al.  Improvement of IPMSM sensorless control performance by suppression of harmonics on the vector control using Fourier transform and repetitive control , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[11]  Yao Jun.  Torque Ripple Suppression of Permanent Magnet Synchronous Motor by the Harmonic Injection , 2011 .

[12]  Ya-Jun Pan,et al.  A modular control scheme for PMSM speed control with pulsating torque minimization , 2004, IEEE Transactions on Industrial Electronics.

[13]  P. Mattavelli,et al.  Torque-ripple reduction in PM synchronous motor drives using repetitive current control , 2005, IEEE Transactions on Power Electronics.