Control-Volume Model for Simulation of Water Injection in Fractured Media: Incorporating Matrix Heterogeneity and Reservoir Wettability Effects

The control-volume discrete-fracture (CVDF) model is extended to incorporate heterogeneity in rock and in rock-fluid properties. A novel algorithm is proposed to model strong water-wetting with zero capillary pressure in the fractures. The extended method is used to simulate: (1) oil production in a layered faulted reservoir, (2) laboratory displacement tests in a stack of matrix blocks with a large contrast in fracture and matrix capillary pressure functions, and (3) water injection in 2D and 3D fractured media with mixedwettability state. Our results show that the algorithm is suitable for the simulation of water injection in heterogeneous porous media both in water-wet and mixed-wettability states. The novel approach with zero fracture capillary and nonzero matrix capillary pressure allows the proper prediction of sharp fronts in the fractures.

[1]  S. Sayegh,et al.  The Influence Of Reservoir Wettability On Waterflood And Miscible Flood Performance , 1992 .

[2]  Richard E. Ewing,et al.  Numerical Simulation of Multiphase Flow in Fractured Porous Media , 2000 .

[3]  Ivar Aavatsmark,et al.  Discretization on Unstructured Grids For Inhomogeneous, Anisotropic Media. Part II: Discussion And Numerical Results , 1998, SIAM J. Sci. Comput..

[4]  J. Molenaar,et al.  The effect of capillary forces on immiscible two-phase flow in heterogeneous porous media , 1995 .

[5]  B. R. Baliga,et al.  A NEW FINITE-ELEMENT FORMULATION FOR CONVECTION-DIFFUSION PROBLEMS , 1980 .

[6]  R. Helmig.  Multiphase Flow and Transport Processes in the Subsurface: A Contribution to the Modeling of Hydrosystems , 2011 .

[7]  N. Morrow.  Wettability and Its Effect on Oil Recovery , 1990 .

[8]  Rainer Helmig,et al.  Comparison of Galerkin-type discretization techniques for two-phase flow in heterogeneous porous media , 1998 .

[9]  Abbas Firoozabadi,et al.  Water Injection in Water-Wet Fractured Porous Media: Experiments and a New Model with Modified Buckley-Leverett Theory , 1999 .

[10]  A. Firoozabadi,et al.  Control‐volume method for numerical simulation of two‐phase immiscible flow in two‐ and three‐dimensional discrete‐fractured media , 2004 .

[11]  A. Firoozabadi,et al.  Capillary Pressure in Fractured Porous Media , 1989 .

[12]  Michael G. Edwards,et al.  Finite volume discretization with imposed flux continuity for the general tensor pressure equation , 1998 .

[13]  M. Robin.  Interfacial Phenomena: Reservoir Wettability in Oil Recovery , 2001 .

[14]  J. Thovert,et al.  Two-phase flow through fractured porous media. , 2003, Physical review. E, Statistical, nonlinear, and soft matter physics.

[15]  S. Joshi,et al.  Horizontal Well Technology , 1991 .

[16]  M. Karimi-Fard,et al.  Numerical Simulation of Water Injection in Fractured Media Using the Discrete-Fracture Model and the Galerkin Method , 2003 .

[17]  D. W. Peaceman.  Fundamentals of numerical reservoir simulation , 1977 .

[18]  Abbas Firoozabadi,et al.  Capillary Pressure in Fractured Porous Media (includes associated papers 21892 and 22212 ) , 1990 .

[19]  Jonathan Richard Shewchuk,et al.  Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator , 1996, WACG.

[20]  Anthony Michel,et al.  A Finite Volume Scheme for Two-Phase Immiscible Flow in Porous Media , 2003, SIAM J. Numer. Anal..

[21]  Michael G. Edwards,et al.  Unstructured, Control-Volume Distributed, Full-Tensor Finite-Volume Schemes with Flow Based Grids , 2002 .

[22]  Ivar Aavatsmark,et al.  Discretization on Unstructured Grids for Inhomogeneous, Anisotropic Media. Part I: Derivation of the Methods , 1998, SIAM J. Sci. Comput..

[23]  L. Durlofsky.  Accuracy of mixed and control volume finite element approximations to Darcy velocity and related quantities , 1994 .

[24]  S. Geiger,et al.  Combining nite volume and nite element methods to simulate uid o w in geologic media , 2003 .

[25]  K. Aziz,et al.  Petroleum Reservoir Simulation , 1979 .