In vitro and in vivo corrosion and histocompatibility of pure Mg and a Mg-6Zn alloy as urinary implants in rat model.

Pure Mg and a Mg-6wt.% Zn alloy were investigated as potential candidates for biodegradable implants for the urinary system. The in vitro corrosion behavior was studied by potentiodynamic polarization and immersion tests in simulated body fluid (SBF) at 37°C. The in vivo degradation and histocompatibility were examined through implantation into the bladders of Wistar rats. The alloying element Zn elevated the passivation potential and increased the cathodic current density. Both in vitro and in vivo degradation tests showed a faster corrosion rate for the Mg-6Zn alloy. Tissues stained with hematoxylin and eosin (HE) suggested that both pure Mg and Mg-6Zn alloy exhibited good histocompatibility in the bladder indwelling implantation and no differences between pure Mg and Mg-6Zn groups were found in bladder, liver and kidney tissues during the 2weeks implantation. Overall, this work presented instructive information on the degradation properties and histocompatibility of pure Mg and the Mg-6Zn alloy in the urinary system.

[1]  E. Han,et al.  The role of second phases in the corrosion behavior of Mg–5Zn alloy , 2012 .

[2]  E. Han,et al.  A novel biodegradable nicotinic acid/calcium phosphate composite coating on Mg-3Zn alloy. , 2013, Materials science & engineering. C, Materials for biological applications.

[3]  P. Chu,et al.  Eelectrochemical properties and corrosion resistance of carbon-ion-implanted magnesium , 2014 .

[4]  Tao Zhang,et al.  Surface characteristics, nano-indentation and corrosion behavior of Nb implanted NiTi alloy , 2011 .

[5]  Tyler E. Curtis,et al.  Fabrication and Short-Term in Vivo Performance of a Natural Elastic Lamina-Polymeric Hybrid Vascular Graft. , 2015, ACS applied materials & interfaces.

[6]  Xinsheng Huang,et al.  Fabrication of Mg alloy tubes for biodegradable stent application. , 2013, Materials science & engineering. C, Materials for biological applications.

[7]  E. Han,et al.  Study of the corrosion product films formed on the surface of Mg–xZn alloys in NaCl solution , 2014 .

[8]  W. Ham,et al.  Early Application of Permanent Metallic Mesh Stent in Substitution for Temporary Polymeric Ureteral Stent Reduces Unnecessary Ureteral Procedures in Patients With Malignant Ureteral Obstruction. , 2015, Urology.

[9]  J. Nellesen,et al.  Magnesium hydroxide temporarily enhancing osteoblast activity and decreasing the osteoclast number in peri-implant bone remodelling. , 2010, Acta biomaterialia.

[10]  E. Han,et al.  The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys , 2012 .

[11]  Hong-feng Jiang,et al.  In vivo comparative property study of the bioactivity of coated Mg-3Zn-0.8Zr alloy. , 2013, Materials science & engineering. C, Materials for biological applications.

[12]  G. Song,et al.  Influence of Microstructure on Corrosion of As‐cast ZE41 , 2008 .

[13]  Tao Zhang,et al.  Ni ion release, osteoblast-material interactions, and hemocompatibility of hafnium-implanted NiTi alloy. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[14]  Yigang Chen,et al.  In vitro and in vivo corrosion measurements of Mg-6Zn alloys in the bile. , 2014, Materials science & engineering. C, Materials for biological applications.

[15]  Yan Li,et al.  Microstructure and mechanical properties of sintered porous magnesium using polymethyl methacrylate as the space holder , 2015 .

[16]  Raimund Erbel,et al.  Temporary scaffolding of coronary arteries with bioabsorbable magnesium stents: a prospective, non-randomised multicentre trial , 2007, The Lancet.

[17]  X. Banquy,et al.  Effect of the Polymer Architecture on the Structural and Biophysical Properties of PEG-PLA Nanoparticles. , 2015, ACS applied materials & interfaces.

[18]  Yufeng Zheng,et al.  In vitro corrosion and biocompatibility of binary magnesium alloys. , 2009, Biomaterials.

[19]  Yan Li,et al.  Effect of Ta2O5/TiO2 thin film on mechanical properties, corrosion and cell behavior of the NiTi alloy implanted with tantalum , 2010 .

[20]  I. Jones,et al.  Effects of secondary phase and grain size on the corrosion of biodegradable Mg-Zn-Ca alloys. , 2015, Materials science & engineering. C, Materials for biological applications.

[21]  Q. Peng,et al.  Microstructures, mechanical and cytocompatibility of degradable Mg–Zn based orthopedic biomaterials , 2014 .

[22]  M. Damaser,et al.  Biocompatibility of nitinol and stainless steel in the bladder: an experimental study. , 2005, The Journal of urology.

[23]  K. Aramaki Effects of organic inhibitors on corrosion of zinc in an aerated 0.5 M NaCl solution , 2001 .

[24]  Andrej Atrens,et al.  Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation , 2010 .

[25]  G. Song,et al.  Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance , 2003 .

[26]  A. Mundy,et al.  What is the best technique for urethroplasty? , 2008, European urology.

[27]  I. Golovin,et al.  Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys , 2016 .

[28]  C. Xie,et al.  Influence of Heat Treatments on In Vitro Degradation Behavior of Mg‐6Zn Alloy Studied by Electrochemical Measurements , 2010 .

[29]  Y. Bao,et al.  The use of internal stents in chronic ureteral obstruction. , 2015, The Journal of urology.

[30]  Yang Song,et al.  Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.

[31]  I. Jones,et al.  The role of β1′ precipitates in the bio-corrosion performance of Mg–3Zn in simulated body fluid , 2014 .

[32]  Yan Li,et al.  Effects of tensile and compressive deformation on corrosion behaviour of a Mg–Zn alloy , 2015 .

[33]  C. Xie,et al.  In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg–Zn alloy , 2009 .

[34]  G. Kagadis,et al.  Ureteral metal stents: 10-year experience with malignant ureteral obstruction treatment. , 2009, The Journal of urology.

[35]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[36]  Paul Martin,et al.  Wound Healing--Aiming for Perfect Skin Regeneration , 1997, Science.

[37]  Heon-Young Ha,et al.  Limitations in the use of the potentiodynamic polarisation curves to investigate the effect of Zn on the corrosion behaviour of as-extruded Mg–Zn binary alloy , 2013 .

[38]  T. Lei,et al.  Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg-Zn alloys , 2012 .