Structural topology optimization of the transition piece for an offshore wind turbine with jacket foundation

The transition piece of a fixed offshore wind turbine is a reinforced part of the support structure that is connected to the wind turbine tower. These structural elements present unique features and are critical components of offshore wind turbines; designed to resist strong bending moments, shear forces and axial loads coming from cyclic environmental loads, such as wind and wave loads, acting during their complete design life of 20 years. Well designed and manufactured transition pieces with optimized ultimate and fatigue capacities, contribute to the structural soundness and reliability of offshore wind turbines. In this paper we investigate the benefits of integrating structural topology optimization in the design process of these elements, specially compared to classical design processes that are strongly based in experience and trial-and-error heuristic procedures. We first develop a solution for a 5 MW reference wind turbine with a jacket support using the classical design process and then apply structural topology optimization techniques to the same design problem. After verification of both solutions, it was found that the optimized solution is lighter and presents hot spots with lower stresses that extend its fatigue life significantly; demonstrating that an integrated design cycle that includes topology optimization can be very effective, speeding up the total design cycle and increasing the reliability of the final product.

[1]  Alaa E. Mansour,et al.  Extreme wave and wind response predictions , 2011 .

[2]  S. N. Voormeeren,et al.  Accurate and efficient modeling of complex offshore wind turbine support structures using augmented superelements , 2014 .

[3]  James Franklin Wilson,et al.  Dynamics of Offshore Structures , 1984 .

[4]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[5]  이 지현,et al.  Design Optimization and Reliability Analysis of Jacket Support Structure for 5-MW Offshore Wind Turbine , 2014 .

[6]  Jason Jonkman,et al.  OC3—Benchmark Exercise of Aero-elastic Offshore Wind Turbine Codes , 2007 .

[7]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[8]  Martin Kühn,et al.  Offshore support structure optimization by means of integrated design and controls , 2012 .

[9]  Jason Jonkman,et al.  Offshore Code Comparison Collaboration within IEA Wind Annex XXIII: Phase II Results Regarding Monopile Foundation Modeling , 2008 .

[10]  George I. N. Rozvany,et al.  On the validity of ESO type methods in topology optimization , 2001 .

[11]  Feargal Brennan,et al.  Multi-criteria assessment of offshore wind turbine support structures , 2011 .

[12]  B. Schmidt,et al.  Upwind design basis (WP4: offshore foundations and support structures) , 2010 .

[13]  J. Jonkman,et al.  Offshore Code Comparison Collaboration (OC3) for IEA Wind Task 23 Offshore Wind Technology and Deployment , 2010 .

[14]  Garrad Hassan,et al.  VERIFICATION OF EUROPEAN WIND TURBINE DESIGN CODES , 2001 .

[15]  Ji-Hyun Lee,et al.  Reliability-based design optimization of monopile transition piece for offshore wind turbine system , 2014 .

[16]  Michael Muskulus,et al.  The simulation error caused by input loading variability in offshore wind turbine structural analysis , 2015 .

[17]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[18]  Puneet Agarwal,et al.  Simulation of offshore wind turbine response for long-term extreme load prediction , 2009 .

[19]  Ji-Young Kim,et al.  Site selection of offshore wind farms around the Korean Peninsula through economic evaluation , 2011 .

[20]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[21]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[22]  Jason Jonkman,et al.  Verification of aero‐elastic offshore wind turbine design codes under IEA Wind Task XXIII , 2014 .

[23]  Yi Min Xie,et al.  Evolutionary Topology Optimization of Continuum Structures: Methods and Applications , 2010 .

[24]  Torgeir Moan,et al.  Short‐term extreme response analysis of a jacket supporting an offshore wind turbine , 2014 .

[25]  Chang-Wan Kim,et al.  Load analysis and comparison of different jacket foundations , 2013 .

[26]  J. Jonkman,et al.  Definition of a 5-MW Reference Wind Turbine for Offshore System Development , 2009 .

[27]  Torgeir Moan,et al.  Long-term fatigue analysis of multi-planar tubular joints for jacket-type offshore wind turbine in time domain , 2011 .

[28]  Chang-Wan Kim,et al.  A study on the effect of different modeling parameters on the dynamic response of a jacket-type offshore wind turbine in the Korean Southwest Sea , 2013 .

[29]  Vicente Negro,et al.  Uncertainties in the design of support structures and foundations for offshore wind turbines , 2014 .

[30]  W. E. De Vries,et al.  Final report WP 4.2: Support Structure Concepts for Deep Water Sites: Deliverable D4.2.8 (WP4: offshore foundations and support structures) , 2011 .

[31]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .