Micromachining of glass inertial sensors

We demonstrate the feasibility of a powder blasting micro-erosion process for the micromachining of accelerometer devices in glass. Using high-speed abrasive microparticles and a metal contact mask, we structure millimeter-size cantilever beams from simple glass slides. By metalizing one side of the glass substrate, we demonstrate both capacitive and piezoresistive/strain gauge detection of the vibrating cantilever mass and measure the frequency response of mechanically excited cantilever beams. We think that our approach opens new perspectives for manufacture of inertial sensing devices in a technology alternative to Si.

[1]  L.M. Roylance,et al.  A batch-fabricated silicon accelerometer , 1979, IEEE Transactions on Electron Devices.

[2]  Georges Asch,et al.  Les capteurs en instrumentations industrielle , 1983 .

[3]  F. Rudolf,et al.  Precision accelerometers with μg resolution , 1990 .

[4]  Masayoshi Esashi,et al.  Integrated silicon capacitive accelerometer with PLL servo technique , 1993 .

[5]  M. Buijs.  Erosion of Glass as Modeled by indentation Theory , 1994 .

[6]  Wolfgang Kuehnel,et al.  A surface micromachined silicon accelerometer with on-chip detection circuitry , 1994 .

[7]  T. S. Baller,et al.  Construction and physical processing of Zeus panels , 1996 .

[8]  Minhang Bao,et al.  A piezoresistive accelerometer with a novel vertical beam structure , 1997 .

[9]  G. Kovacs,et al.  Force-balanced accelerometer with mG resolution, fabricated using Silicon Fusion Bonding and Deep Reactive Ion Etching , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[10]  Martin A. Schmidt,et al.  IC process compatibility of sealed cavity sensors , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[11]  P. J. Slikkerveer,et al.  Erosion and damage by sharp particles , 1998 .

[12]  Martin A. Schmidt,et al.  Inertial sensor technology using DRIE and wafer bonding with connecting capability , 1999 .

[13]  M. Giousouf,et al.  Measurements on micromachined silicon accelerometers with piezoelectric sensor action , 1999 .

[14]  J. Binder,et al.  Laterally driven accelerometer fabricated in single crystalline silicon , 2000 .

[15]  M. Gijs,et al.  Powder blasting for three-dimensional microstructuring of glass , 2000 .

[16]  Martin A. M. Gijs,et al.  Oblique Powder Blasting for Three-dimensional Micromachining of Brittle Materials , 2001 .

[17]  T. Kenny,et al.  A high-performance planar piezoresistive accelerometer , 2000, Journal of Microelectromechanical Systems.