Development of a Two-Dimensional-Thermal Model of Three Battery Chemistries
暂无分享,去创建一个
Joeri Van Mierlo | Joris Jaguemont | Noshin Omar | Shovon Goutam | Peter Van den Bossche | Alexandros Nikolian | N. Omar | P. Van Den Bossche | J. Van Mierlo | J. Jaguemont | S. Goutam | A. Nikolian
[1] Xia Wang,et al. The Influence of Cell Temperature on the Entropic Coefficient of a Lithium Iron Phosphate (LFP) Pouch Cell , 2014 .
[2] J. Shim,et al. Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature , 2002 .
[3] K. Smith,et al. Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries , 2013 .
[4] Yonghuang Ye,et al. Electro-thermal cycle life model for lithium iron phosphate battery , 2012 .
[5] N. Omar,et al. Impact of Tab Location on Large Format Lithium-Ion Pouch Cell Based on Fully Coupled Tree-Dimensional Electrochemical-Thermal Modeling , 2014 .
[6] Michael A. Danzer,et al. Advancements in OCV Measurement and Analysis for Lithium-Ion Batteries , 2013, IEEE Transactions on Energy Conversion.
[7] J. Bernard,et al. Calendar aging of commercial graphite/LiFePO4 cell - Predicting capacity fade under time dependent storage conditions , 2014 .
[8] M. Wohlfahrt‐Mehrens,et al. Ageing mechanisms in lithium-ion batteries , 2005 .
[9] Yonghuang Ye,et al. Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell , 2013 .
[10] N. Omar,et al. Development of 2D thermal battery model for Lithium-ion pouch cells , 2013, 2013 World Electric Vehicle Symposium and Exhibition (EVS27).
[11] M. Ceraolo,et al. High fidelity electrical model with thermal dependence for characterization and simulation of high power lithium battery cells , 2012, 2012 IEEE International Electric Vehicle Conference.
[12] K.J. Tseng,et al. Modelling of battery temperature effect on electrical characteristics of Li-ion battery in hybrid electric vehicle , 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.
[13] J. Van Mierlo,et al. Lithium Iron Phosphate - Assessment of Calendar Life and Change of Battery Parameters , 2014, 2014 IEEE Vehicle Power and Propulsion Conference (VPPC).
[14] K. Edström,et al. Electrochemically lithiated graphite characterised by photoelectron spectroscopy , 2003 .
[15] Xia Wang,et al. Predicting heat generation in a lithium-ion pouch cell through thermography and the lumped capacitance model , 2016 .
[16] N. Omar,et al. Assessment of performance of lithium iron phosphate oxide, nickel manganese cobalt oxide and nickel cobalt aluminum oxide based cells for using in plug-in battery electric vehicle applications , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.
[17] M. Broussely,et al. Main aging mechanisms in Li ion batteries , 2005 .
[18] A. Eddahech,et al. Electro-thermal model of lithium-ion batteries for electrified vehicles applications , 2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE).
[19] Lip Huat Saw,et al. Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles , 2014 .
[20] Zhenhong Lin,et al. Charging infrastructure planning for promoting battery electric vehicles: An activity-based approach using multiday travel data , 2014 .
[21] M. Armand,et al. Facile reduction of pseudo-carbonates: Promoting solid electrolyte interphases with dicyanoketene alkylene acetals in lithium-ion batteries , 2016 .
[22] G. V. Avvari,et al. Optimal battery charging, Part I: Minimizing time-to-charge, energy loss, and temperature rise for OCV-resistance battery model , 2016 .
[23] C. Veth,et al. Thermal characterizations of a large-format lithium ion cell focused on high current discharges , 2014 .
[24] Yves Dube,et al. A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures , 2016 .
[25] Kang Xu,et al. Electrochemical impedance study on the low temperature of Li-ion batteries , 2004 .
[26] Hongwen He,et al. Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach , 2011 .
[27] Hoay Beng Gooi,et al. An improved lithium-ion battery model with temperature prediction considering entropy , 2012, 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe).
[28] Joris Jaguemont,et al. Characterization and Modeling of a Hybrid-Electric-Vehicle Lithium-Ion Battery Pack at Low Temperatures , 2016, IEEE Transactions on Vehicular Technology.
[29] Taehyun Shim,et al. Novel Predictive Electric Li-Ion Battery Model Incorporating Thermal and Rate Factor Effects , 2011, IEEE Transactions on Vehicular Technology.
[30] Jun Liu,et al. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management , 2010 .
[31] Chaoyang Wang,et al. Li-Ion Cell Operation at Low Temperatures , 2013 .
[32] Ralph E. White,et al. A Distributed Thermal Model for a Li-Ion Electrode Plate Pair , 2013 .
[33] N. Omar,et al. Surface temperature evolution and the location of maximum and average surface temperature of a lithium-ion pouch cell under variable load profiles , 2014 .
[34] A. Jossen,et al. Fast and Accurate Measurement of Entropy Profiles of Commercial Lithium-Ion Cells , 2015 .
[35] J. Pyrhonen,et al. Thermal parameters determination of battery cells by local heat flux measurements , 2014 .
[36] N. Omar,et al. Comparative Study of Surface Temperature Behavior of Commercial Li-Ion Pouch Cells of Different Chemistries and Capacities by Infrared Thermography , 2015 .
[37] Joris de Hoog,et al. Classification of Electric modeling and Characterization methods of Lithium-ion Batteries for Vehicle Applications , 2014 .
[38] M. Fowler,et al. Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions , 2016 .
[39] Vi Kie Soo,et al. Opportunities to Improve Recycling of Automotive Lithium Ion Batteries , 2015 .
[40] K. Amine,et al. High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells , 2005 .
[41] Rui Zhao,et al. A review of thermal performance improving methods of lithium ion battery: Electrode modification and thermal management system , 2015 .
[42] M. Gepp,et al. Advanced thermal management for temperature homogenization in high-power lithium-ion battery systems based on prismatic cells , 2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE).