Fenestration refurbishment of an educational building: Experimental and numerical evaluation of daylight, thermal and building energy performance

Abstract Although strict building energy codes are implemented periodically in many countries, buildings continually consume a momentous quota of total primary energy. Potentially, new buildings can satisfy current building energy codes, while existing buildings require refurbishment. Recently, the fenestration system of a 4-story educational building located in Cheonan, Republic of Korea (36.815oN, 127.114oE) has been refurbished from single glazed double-sliding window system with aluminum (Al) frame to double low-e glazed double-sliding window system with polyvinyl chloride (PVC) frame. The main objective of this study was to investigate the performance of the window system prior to and after refurbishment, using experimental and numerical tools. In particular, daylight environment of a demarcated space within the reference building was examined. Thermal behavior of glazing systems and window frames was scrutinized using infra-red (IR) thermography. The dynamic behavior of window system in relation to building energy performance was evaluated through EnergyPlus. Reference data of the building and nominal operational schedules were used as inputs for the building model, while inputs for the window system were based on optical and structural parameters of its data sets. Owing to thermal inertia, temperature of the single glazing was on average 0.7–1.9 °C higher than the double glazing. Considering linear radiant heat loss through Al and PVC frames, the former showed an avearge temperature of 5 °C higher than the latter. Although electrical lighting energy consumption increased, the overall annual building energy consumption of the renovated building reduced by 51.1 GJ (i.e. 4.3%).

[1]  T. McMahon,et al.  Updated world map of the Köppen-Geiger climate classification , 2007 .

[2]  Kornelis Blok,et al.  Germany's path towards nearly zero-energy buildings—Enabling the greenhouse gas mitigation potential in the building stock , 2011 .

[3]  Leigh Seung-Bok,et al.  An Analysis of Demand for Environmental Controls on Different Residential Building Types , 2004 .

[4]  Kang Soo Kim,et al.  An empirical validation of lighting energy consumption using the integrated simulation method , 2013 .

[5]  Sheryl Staub-French,et al.  Assessment of the Impact of Window Size, Position and Orientation on Building Energy Load Using BIM , 2016 .

[6]  Arnold Janssens,et al.  Airtightness and watertightness of window frames: Comparison of performance and requirements , 2016 .

[7]  Belinda Pelaz,et al.  Energy assessment and optimization of perforated metal sheet double skin façades through Design Builder; A case study in Spain , 2016 .

[8]  Moncef Krarti,et al.  Impact of window selection on the energy performance of residential buildings in South Korea , 2012 .

[9]  Yupeng Wu,et al.  Smart windows—Dynamic control of building energy performance , 2017 .

[10]  Davor Mikulić,et al.  The socioeconomic impact of energy saving renovation measures in urban buildings , 2016 .

[11]  F. Reda,et al.  Northern European nearly zero energy building concepts for apartment buildings using integrated solar technologies and dynamic occupancy profile: Focus on Finland and other Northern European countries , 2019, Applied Energy.

[12]  Wen Hong,et al.  Building Energy Efficiency: Why Green Buildings Are Key to Asia's Future , 2007 .

[13]  Kamaruzzaman Sopian,et al.  The role of window glazing on daylighting and energy saving in buildings , 2015 .

[14]  Lu Aye,et al.  A review of Net Zero Energy Buildings with reflections on the Australian context , 2018 .

[15]  Stig-Inge Gustafsson.  Optimal fenestration retrofits by use of MILP programming technique , 2001 .

[16]  Jing Liang,et al.  Do energy retrofits work? Evidence from commercial and residential buildings in Phoenix , 2016, Journal of Environmental Economics and Management.

[17]  Daeung Danny Kim,et al.  Energy performance assessment towards nearly zero energy community buildings in South Korea , 2019, Sustainable Cities and Society.

[18]  Soteris A. Kalogirou,et al.  Application of infrared thermography for the determination of the overall heat transfer coefficient (U-Value) in building envelopes , 2011 .

[19]  Ricardo M.S.F. Almeida,et al.  An infrared thermography passive approach to assess the effect of leakage points in buildings , 2017 .

[20]  F. Goia.  Search for the optimal window-to-wall ratio in office buildings in different European climates and the implications on total energy saving potential , 2016 .

[21]  Ryan E. Smith,et al.  Prefab Architecture: A Guide to Modular Design and Construction , 2010 .

[22]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[23]  Dániel Bakonyi,et al.  Simulation aided optimization of a historic window's refurbishment , 2016 .

[24]  Constantinos A. Balaras,et al.  Infrared thermography for building diagnostics , 2002 .

[25]  Tae-Ho Song,et al.  Vacuum insulation properties of glass wool and opacified fumed silica under variable pressing load and vacuum level , 2013 .

[26]  Jianlei Niu,et al.  Comprehensive analysis on thermal and daylighting performance of glazing and shading designs on office building envelope in cooling-dominant climates , 2014 .

[27]  Talal Salem,et al.  Energy and economic analysis on retrofit actions for Italian public historic buildings , 2019, Energy.

[28]  Karsten Voss,et al.  Net zero energy buildings: A consistent definition framework , 2012 .

[29]  L Kudrnacova,et al.  Renovation and design of double casement windows with regard to the occurrence of water vapour condensation or mould on the interior surface of the window jamb , 2017 .

[30]  Jian Ge,et al.  Post-evaluation of energy consumption of the green retrofit building , 2019, Energy Procedia.

[31]  Arild Gustavsen,et al.  Key elements of and material performance targets for highly insulating window frames , 2011 .

[32]  Paul J. Littlefair.  Predicting annual lighting use in daylit buildings , 1990 .

[33]  Xiaodong Cao,et al.  Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade , 2016 .

[34]  Danny H.W. Li,et al.  Lighting and energy performance for an office using high frequency dimming controls , 2006 .

[35]  Wilhelm A. Friess,et al.  A review of passive envelope measures for improved building energy efficiency in the UAE , 2017 .

[36]  Arild Gustavsen,et al.  Fenestration of Today and Tomorrow: A State-of-the-Art Review and Future Research Opportunities , 2013 .

[37]  S. N. Garg,et al.  Energy rating of different glazings for Indian climates , 2009 .