论文信息 - Experimental Study of the Laser Cutting Process on 1C45 - 3 mm Steel

Experimental Study of the Laser Cutting Process on 1C45 - 3 mm Steel

The Paper Presents the Measurement Systems Analysis, System Capability and Optimization of a Laser Cutting System for 3 Mm Alloy Steel. for the Measurement System Analysis and System Capability the Data was Introduced in a Excel Sheet which was Designed According to QS9000 Standard (Measurement System Analysis) to Calculate the Measuring System Repeatability, Reproducibility and Capability. Design of Experiment (DOE) was Used for Process Optimization the Optimization was Conducted in an Operational Manufacturing Environment and was Based on the Design of a 25 Full Factorial Experiment. the Laser Parameters (input) were Feed Rate v, Gas Pressure p, Power P, Frequency F and Efficiency R while the Response was the Roughness Rz. it was Analyzed the Influence of Laser Parameters on Roughness to Obtain a Complex Relationship to Show Roughness Rz Variation According to these Parameters, to Minimize the Rz and Maximize the Feed Rate.

[1] Choon-Man Lee,et al. A study on the optimal cutting condition of a high speed feeding type laser cutting machine by using Taguchi method , 2006 .

[2] S. H. Cheraghi,et al. CO2 laser cut quality of 4130 steel , 2003 .

[3] Indrajit Mukherjee,et al. A review of optimization techniques in metal cutting processes , 2006, Comput. Ind. Eng..

[4] Shih-Feng Tseng,et al. Optimized laser cutting on light guide plates using grey relational analysis , 2011 .

[5] Miloš Madić,et al. EXPERIMENTAL INVESTIGATIONS OF CO2 LASER CUT QUALITY: A REVIEW , 2011 .

[6] Dr. H. Fred Walker. Characterizing Productivity of a 4kw CO2 Laser Cutting System for 0.25” Mild Steel Using Central Composite Methodology , 2006 .