Optimization of laser-damage resistance of evaporated hafnia films at 351nm

A systematic study was undertaken to improve the laser-damage resistance of multilayer high-reflector coatings for use at 351 nm on the OMEGA EP Laser System. A series of hafnium dioxide monolayer films deposited by electron-beam evaporation with varying deposition rates and oxygen backfill pressures were studied using transmission electron microscopy (TEM), x-ray diffraction (XRD), and refractive index modeling. These exhibit microstructural changes for sufficiently slow deposition rates and high oxygen backfill pressures, resulting in an absence of crystalline inclusions and a lower refractive index. Hafnia monolayers exhibited laser-damage resistance as high as 12 J/cm2 at 351 nm with a 0.5-ns pulse. This process was utilized in the fabrication of reduced electric-field-type multilayer high-reflector coatings. Measured laser-damage thresholds as high as 16.63 J/cm2 were achieved under identical test conditions, an exceptional improvement relative to historical damage thresholds of the order of 3 to 5 J/cm2.

[1]  Christopher J. Stolz,et al.  Advantages of evaporation of hafnium in a reactive environment formanufacture of high-damage-threshold multilayer coatings by electron-beam deposition , 1999, Optical Systems Design.

[2]  C J Stolz,et al.  Reactive evaporation of low-defect density hafnia. , 1993, Applied optics.

[3]  Peter Weissbrodt,et al.  Review of structural influences on the laser damage thresholds of oxide coatings , 1996, Laser Damage.

[4]  J. H. Apfel,et al.  Optical coating design with reduced electric field intensity. , 1977, Applied optics.

[5]  Christopher J. Stolz,et al.  Fabrication of meter-scale laser resistant mirrors for the National Ignition Facility: a fusion laser , 2004, SPIE Optics + Photonics.

[6]  Semyon Papernov,et al.  One step closer to the intrinsic laser damage threshold of HfO2 and SiO2 monolayer thin films , 1998, Laser Damage.

[7]  Angela Duparré,et al.  Effects of interface roughness on the spectral properties of thin films and multilayers. , 2003, Applied optics.

[8]  Norbert Kaiser,et al.  Mechanical stress and thermal-elastic properties of oxide coatings for use in the deep-ultraviolet spectral region. , 2002, Applied optics.

[9]  L. Freund,et al.  Thin Film Materials: Stress, Defect Formation and Surface Evolution , 2004 .

[10]  David J. Srolovitz,et al.  Physical Origins of Intrinsic Stresses in Volmer-Weber Thin Films , 2002 .

[11]  N. Kaiser,et al.  Defect induced laser damage in oxide multilayer coatings for 248 nm , 1998 .

[12]  S. Papernov,et al.  Localized absorption effects during 351 nm, pulsed laser irradiation of dielectric multilayer thin films , 1997 .

[13]  Angela Piegari,et al.  Laser damage resistance of thin films for ultraviolet optical components , 2001, ROMOPTO International Conference on Micro- to Nano- Photonics.

[14]  Milton Ohring,et al.  Materials science of thin films : deposition and structure , 2002 .

[15]  John A. Thornton,et al.  Structure-Zone Models Of Thin Films , 1988, Optics & Photonics.

[16]  B. Movchan,et al.  STRUCTURE AND PROPERTIES OF THICK CONDENSATES OF NICKEL, TITANIUM, TUNGSTEN, ALUMINUM OXIDES, AND ZIRCONIUM DIOXIDE IN VACUUM. , 1969 .

[17]  Salvatore Scaglione,et al.  Influence of standing-wave electric field pattern on the laser damage resistance of HfO2 thin films , 2002 .

[18]  J. V. Sanders.  Structure of Evaporated Metal Films , 1971 .

[19]  Christopher J. Stolz,et al.  High precision coating technology for large aperture NIF optics , 2001 .

[20]  David Talbot,et al.  Optimization of deposition uniformity for large-aperture National Ignition Facility substrates in a planetary rotation system. , 2006, Applied optics.

[21]  Catherine Pelle,et al.  One-hundred Joule per square centimeter 1.06-μm mirrors , 2000, Laser Damage.

[22]  Jean-Yves Robic,et al.  Residual stresses in evaporated silicon dioxide thin films: Correlation with deposition parameters and aging behavior , 1995 .