Numerical simulation of three-dimensional unsteady granular flows in rotary kiln

Abstract The granular particle motion with rolling mode in rotary kiln is investigated using a three-dimensional mathematical model based on the Euler–Euler two-phase flow and the kinetic theory of granular flow. The mathematical model verified by comparing with the published experimental data is used to simulate performance of an inclined rotary kiln. The angle of inclination and the residence time of particles in rotary kiln are taken into account. The active layer thickness can be calculated by observing the particle velocity change from positive to negative values. The stagnation point at the bottom of the free flowing zone is the interface between the active layer and the passive layer. Simulations show that the active layer of the charge end of the rotary kiln is thin and particle velocity is low. With the increase of axial distance, the active layer thickness and velocities of granular particles increase respectively, the thickness of the active layer and velocities of particles close to the discharge end of the rotary kiln decrease. A fourth-order polynomial velocity profile can be obtained from the numerical simulation results. Apart from providing a computationally efficient tool to simulate kiln performance, the results discussed here will provide a useful basis for the development of comprehensive three-dimensional models of rotary kilns.

[1]  Yong Xu,et al.  2D DEM simulation of particle mixing in rotating drum: A parametric study , 2010 .

[2]  D. Gidaspow,et al.  Kinetic theory of fluidized binary granular mixtures. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[3]  P. V. Barr,et al.  Modelling of particle mixing and segregation in the transverse plane of a rotary kiln , 1996 .

[4]  Yi Zhang,et al.  The interface between fluid-like and solid-like behaviour in two-dimensional granular flows , 1992, Journal of Fluid Mechanics.

[5]  Jpk Seville,et al.  Segregation of granular flow in the transverse plane of a rolling mode rotating drum , 2002 .

[6]  H. Arastoopour,et al.  Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase , 2000 .

[7]  Milton S. Plesset,et al.  Viscous Effects in Rayleigh-Taylor Instability. , 1974 .

[8]  P. V. Barr,et al.  Granular flow behaviour in the transverse plane of a partially filled rotating cylinder , 1997, Journal of Fluid Mechanics.

[9]  A. Neri,et al.  Riser hydrodynamics: Simulation using kinetic theory , 2000 .

[10]  Jamal Naser,et al.  An unequal granular temperature kinetic theory : description of granular flow with multiple particle classes , 2003 .

[11]  Eckehard Specht,et al.  Prediction of rolling bed motion in rotating cylinders , 2004 .

[12]  Jpk Seville,et al.  Granular motion in rotating drums: bed turnover time and slumping–rolling transition , 2002 .

[13]  Carl Duchesne,et al.  Effect of friction coefficient and density on mixing particles in the rolling regime , 2011 .

[14]  Wang Zhiwei,et al.  Investigation of gas-solid two-phase flow across circular cylinders with discrete vortex method , 2009 .

[15]  P. V. Barr,et al.  A thermal model for the rotary kiln including heat transfer within the bed , 1996 .

[16]  Lynn F. Gladden,et al.  Granular temperature: Comparison of Magnetic Resonance measurements with Discrete Element Model simulations , 2008 .

[17]  J. Bao,et al.  Numerical simulation of particle dynamics in different flow regimes in a rotating drum , 2007 .

[18]  F. Daviaud,et al.  Experimental study of granular surface flows via a fast camera: A continuous description , 2002 .

[19]  Jochen Mellmann,et al.  The transverse motion of solids in rotating cylinders—forms of motion and transition behavior , 2001 .

[20]  A. V. Orpe,et al.  Scaling relations for granular flow in quasi-two-dimensional rotating cylinders. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[21]  Jpk Seville,et al.  Solids motion in rolling mode rotating drums operated at low to medium rotational speeds , 2001 .

[22]  Yassine Demagh,et al.  Surface particle motions in rotating cylinders: Validation and similarity for an industrial scale kiln , 2012 .

[23]  C.R.E. de Oliveira,et al.  A study of bubbling and slugging fluidised beds using the two-fluid granular temperature model , 2001 .

[24]  Julio M. Ottino,et al.  Scaling of granular flow processes: From surface flows to design rules , 2002 .

[25]  Pierre Alart,et al.  Numerical simulation of two-dimensional steady granular flows in rotating drum: On surface flow rheology , 2005 .

[26]  J. K. Brimacombe,et al.  Experimental study of transverse bed motion in rotary kilns , 1983 .

[27]  Soon Keat Tan,et al.  Application of incomplete similarity theory for estimating maximum shear layer thickness of granular flows in rotating drums , 2011 .

[28]  Xiaoyan Liu,et al.  Analytical solution for the rolling-mode granular motion in rotary kilns , 2006 .

[29]  Mathieu S. Capcarrère,et al.  Necessary conditions for density classification by cellular automata. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[30]  Hamid Arastoopour,et al.  Numerical simulation and experimental analysis of gas/solid flow systems: 1999 Fluor-Daniel Plenary lecture , 2001 .

[31]  D. Gidaspow,et al.  Hydrodynamics of binary fluidization in a riser : CFD simulation using two granular temperatures , 2003 .

[32]  Michele Marigo,et al.  A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions , 2012 .