Carbon molecular sieve hollow fiber membranes derived from dip-coated precursor hollow fibers comprising nanoparticles

[1]  Hui Li,et al.  The enhancement of mechanical properties of P84 hollow fiber membranes by thermally annealing below and above Tg , 2020 .

[2]  Oishi Sanyal,et al.  Carbon molecular sieve membrane preparation by economical coating and pyrolysis of porous polymer hollow fibers. , 2019, Angewandte Chemie.

[3]  Chen Zhang,et al.  Composite Carbon Molecular Sieve Hollow Fiber Membranes: Resisting Support Densification via Silica Particle Stabilization , 2018, Industrial & Engineering Chemistry Research.

[4]  Oishi Sanyal,et al.  Cause and effects of hyperskin features on carbon molecular sieve (CMS) membranes , 2018 .

[5]  Jian Jin,et al.  Carbon Molecular Sieve Membranes Derived from Tröger's Base-Based Microporous Polyimide for Gas Separation. , 2018, ChemSusChem.

[6]  W. Koros,et al.  Iron-containing carbon molecular sieve membranes for advanced olefin/paraffin separations , 2018 .

[7]  Gongpin Liu,et al.  6FDA-DETDA: DABE polyimide-derived carbon molecular sieve hollow fiber membranes: Circumventing unusual aging phenomena , 2018 .

[8]  W. Koros,et al.  The significance of entropic selectivity in carbon molecular sieve membranes derived from 6FDA/DETDA:DABA(3:2) polyimide , 2017 .

[9]  W. Koros,et al.  Ultraselective Carbon Molecular Sieve Membranes with Tailored Synergistic Sorption Selective Properties , 2017, Advanced materials.

[10]  J. Lai,et al.  Adjustable microstructure carbon molecular sieve membranes derived from thermally stable polyetherimide/polyimide blends for gas separation , 2017 .

[11]  I. Pinnau,et al.  Carbon molecular sieve membrane from a microporous spirobisindane-based polyimide precursor with enhanced ethylene/ethane mixed-gas selectivity , 2017 .

[12]  W. Koros,et al.  Effects of pyrolysis conditions on gas separation properties of 6FDA/DETDA:DABA(3:2) derived carbon molecular sieve membranes , 2016 .

[13]  H. Tseng,et al.  Enhanced H2/CH4 and H2/CO2 separation by carbon molecular sieve membrane coated on titania modified alumina support: Effects of TiO2 intermediate layer preparation variables on interfacial adhesion , 2016 .

[14]  Xiaotong Wei,et al.  Ultrathin carbon molecular sieve membrane for propylene/propane separation , 2016 .

[15]  W. Koros,et al.  Carbon molecular sieve membrane structure–property relationships for four novel 6FDA based polyimide precursors , 2015 .

[16]  W. Koros,et al.  Engineering substructure morphology of asymmetric carbon molecular sieve hollow fiber membranes , 2014 .

[17]  W. Koros,et al.  Carbon molecular sieve membranes derived from Matrimid® polyimide for nitrogen/methane separation , 2014 .

[18]  Yi Shen,et al.  Influence of inorganic fillers on the structural and transport properties of mixed matrix membranes , 2013 .

[19]  W. Koros,et al.  Matrimid derived carbon molecular sieve hollow fiber membranes for ethylene/ethane separation , 2011 .

[20]  Donald R Paul,et al.  Sub-TgCross-Linking of a Polyimide Membrane for Enhanced CO2Plasticization Resistance for Natural Gas Separation , 2011 .

[21]  Yiming Cao,et al.  Effects of cross-linkers with different molecular weights in cross-linked Matrimid 5218 and test temperature on gas transport properties , 2008 .

[22]  W. Koros,et al.  Carbon molecular sieve gas separation membranes-I. Preparation and characterization based on polyimide precursors , 1994 .