Design of Three-Phase V-Shaped Interior Permanent Magnet Synchronous Motor for Air Conditioning Compressor of Electric Vehicle

Air conditioning system of electric vehicles has new change as the internal combustion engine is being replaced with electrified AC motor. With large amount of batteries installed at the bottom of frame, the conventional compressor which is belt-driven can be removed and another AC motor can play the role for air conditioning in electric vehicles. From this change, the system efficiency would be improved since it is possible to control the electrified compressor independently from traction system in contrast with the belt-driven compressor. As a result, by applying the electrified compressor for air conditioning system, the whole system can achieve better efficiency and longer driving distance, which is most important in electric vehicles. In this paper, 3-phase interior permanent magnet synchronous motor (IPMSM) was designed using lumped-parameter model and finite element method.

[1]  Alfredo Vagati,et al.  Design criteria of high performance synchronous reluctance motors , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[2]  G. Franceschini,et al.  Cross-saturation in synchronous reluctance motors of the transverse-laminated type , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[3]  Shigeo Morimoto,et al.  The performance comparison of SPMSM, IPMSM and SynRM in use as air-conditioning compressor , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[4]  Edward Carl Francis Lovelace.  Optimization of a magnetically saturable interior permanent-magnet synchronous machine drive , 2000 .

[5]  C. Sadarangani,et al.  Winding factors and Joule losses of permanent magnet machines with concentrated windings , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[6]  Sadegh Vaez-Zadeh,et al.  Multiobjective design optimization of air-core linear permanent-magnet synchronous motors for improved thrust and low magnet consumption , 2006, IEEE Transactions on Magnetics.

[7]  Dan M. Ionel,et al.  A review of recent developments in electrical machine design optimization methods with a permanent magnet synchronous motor benchmark study , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[8]  Aimeng Wang,et al.  Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle , 2011, IEEE Transactions on Magnetics.

[9]  T. Marcic,et al.  Direct Comparison of Induction Motor and Line-Start IPM Synchronous Motor Characteristics for Semi-Hermetic Compressor Drives , 2012, IEEE Transactions on Industry Applications.

[10]  Sai Sudheer Reddy Bonthu,et al.  Optimal design of five-phase permanent magnet assisted synchronous reluctance motor for low output torque ripple , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[11]  Zhi Yang,et al.  Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV Applications , 2015, IEEE Transactions on Transportation Electrification.

[12]  Tsuyoshi Higuchi,et al.  General formulation of winding factor for fractional-slot concentrated winding design , 2016 .

[13]  Sai Sudheer Reddy Bonthu,et al.  Design of five-phase permanent magnet assisted synchronous reluctance motor for low output torque ripple applications , 2016 .

[14]  Rukmi Dutta,et al.  Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[15]  Thomas A. Lipo,et al.  Introduction to AC machine design , 2017 .

[16]  Ali Emadi,et al.  Design and Comparison of Interior Permanent Magnet Motor Topologies for Traction Applications , 2017, IEEE Transactions on Transportation Electrification.

[17]  Sai Sudheer Reddy Bonthu,et al.  Comparisons of Rare-Earth and Rare-Earth-Free External Rotor Permanent Magnet Assisted Synchronous Reluctance Motors , 2017, IEEE Transactions on Industrial Electronics.

[18]  Sai Sudheer Reddy Bonthu,et al.  Design Optimization With Multiphysics Analysis on External Rotor Permanent Magnet-Assisted Synchronous Reluctance Motors , 2018, IEEE Transactions on Energy Conversion.

[19]  Simon Zossak,et al.  Sources of torque ripple and their influence in BLDC motor drives , 2019, Transportation Research Procedia.

[20]  Akira Chiba,et al.  Acoustic Noise Reduction of a High-Efficiency Switched Reluctance Motor for Hybrid Electric Vehicles With Novel Current Waveform , 2019, IEEE Transactions on Industry Applications.

[21]  Guohai Liu,et al.  A Novel Spoke-Type PM Motor With Auxiliary Salient Poles for Low Torque Pulsation , 2020, IEEE Transactions on Industrial Electronics.

[22]  M. Stulrajter,et al.  Current Harmonics Controller for Reduction of Acoustic Noise, Vibrations and Torque Ripple Caused by Cogging Torque in PM Motors under FOC Operation , 2020 .

[23]  Soo-Whang Baek,et al.  Design Optimization and Experimental Verification of Permanent Magnet Synchronous Motor Used in Electric Compressors in Electric Vehicles , 2020 .

[24]  The Influence of LC Filter on the Current Control of PWM-Fed Induction Motor Considering the Effect of Back-EMF , 2020 .