Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Lappeenranta University of Technology Acta Universitatis Lappeenrantaensis 523

[1]  M. Janda,et al.  Prediction of eddy current losses of surface mounted permanent magnet servo motor , 2012, 2012 XXth International Conference on Electrical Machines.

[2]  A. Boglietti,et al.  A General model to predict the iron losses in inverter fed induction motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[3]  C.R. Sullivan,et al.  Simplified high-accuracy calculation of eddy-current loss in round-wire windings , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[4]  Di Wu,et al.  Stator Design for a 1000 kW HTSC Motor With Air-gap Winding , 2011, IEEE Transactions on Applied Superconductivity.

[5]  Marian K. Kazimierczuk,et al.  Analytical Optimization of Solid–Round-Wire Windings , 2013, IEEE Transactions on Industrial Electronics.

[6]  R. L. Stoll,et al.  Calculation of the magnetic field of rotating machines. Part 5: Field in the end region of turbogenerators and the eddy-current loss in the end plates of stator cores , 1966 .

[7]  B. J. Chalmers,et al.  Stray losses in squirrel-cage induction motors. Validity of the reverse-rotation test method , 1963 .

[8]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[9]  M. O'Malley,et al.  The inertial response of induction-machine-based wind turbines , 2005, IEEE Transactions on Power Systems.

[10]  F. Lee,et al.  Proximity effects in coils for high frequency power applications , 1992 .

[11]  D. Hanselman,et al.  Eddy-current effects in slot-bound conductors , 1995 .

[12]  R. L. Stoll.  Solution of linear steady-state eddy-current problems by complex successive overrelaxation , 1970 .

[13]  N. Glew.  Stray losses in induction motors-if only I knew where to start! , 1999 .

[14]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[15]  Rafal Wrobel,et al.  Contribution of End-Winding Proximity Losses to Temperature Variation in Electromagnetic Devices , 2012, IEEE Transactions on Industrial Electronics.

[16]  R. E. Gilman.  Eddy current losses in armature conductors , Journal of the A.I.E.E..

[17]  G. Traxler-Samek,et al.  Comparison of Time-Harmonic and Transient Finite Element Analyses for Eddy Currents in the Stator Clamping System of Synchronous Generators , 2007, 2007 Canadian Conference on Electrical and Computer Engineering.

[18]  Karl Küpfmüller,et al.  Einführung in die theoretische Elektrotechnik , 1932 .

[19]  A. Arkkio,et al.  Analysis of Eddy-Current Loss in End Shield and Frame of a Large Induction Machine , 2010, IEEE Transactions on Magnetics.

[20]  Joao P. S. Catalao,et al.  Modeling, control and simulation of full-power converter wind turbines equipped with permanent magnet synchronous generator , 2010 .

[21]  A. A. Jimoh,et al.  Stray Losses in Induction Machines: Part I, Definition, Origin and Measurement , 1985, IEEE Power Engineering Review.

[22]  Bernard Multon,et al.  Sizing Optimization Methodology of a Surface Permanent Magnet Machine-Converter System Over a Torque-Speed Operating Profile: Application to a Wave Energy Converter , 2012, IEEE Transactions on Industrial Electronics.

[23]  Albert Foggia,et al.  A 3D finite-element computation of eddy currents and losses in the stator end laminations of large synchronous machines , 1996 .

[24]  J. Lidenholm,et al.  Core Loss Prediction in Large Hydropower Generators: Influence of Rotational Fields , 2009, IEEE Transactions on Magnetics.

[25]  A. Arkkio,et al.  Time-harmonic finite-element analysis of eddy currents in the form-wound stator winding of a cage induction motor , 2007 .

[26]  Xavier Jannot,et al.  Analytical calculation of rotor magnet eddy-current losses for high speed IPMSM , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[27]  M. Aoulkadi,et al.  When loads stray: Evaluation of Different Measurement Methods to Determine Stray Load Losses in Induction Machines , 2008, IEEE Industrial Electronics Magazine.

[28]  Yanping Liang,et al.  Numerical calculation of end region electromagnetic field of large air-cooled turbogenerator , 2008, 2008 World Automation Congress.

[29]  Jan Abraham Ferreira,et al.  Improved analytical modeling of conductive losses in magnetic components , 1994 .

[30]  P. Sergeant,et al.  Effect of segmentation on eddy-current loss in permanent-magnets of axial-flux PM machines using a multilayer-2D — 2D coupled model , 2012, 2012 XXth International Conference on Electrical Machines.

[31]  Johan Gyselinck,et al.  Homogenization of Form-Wound Windings in Frequency and Time Domain Finite-Element Modeling of Electrical Machines , 2010, IEEE Transactions on Magnetics.

[32]  M. Bartoli,et al.  Modeling Litz-wire winding losses in high-frequency power inductors , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[33]  K. Bradley,et al.  Comparison of measured and analytically calculated stray load losses in standard cage induction machines , 2008, 2008 18th International Conference on Electrical Machines.

[34]  Charles R. Sullivan,et al.  Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or three-dimensional field geometry , 2001 .

[35]  A. Arkkio,et al.  Calculation and Analysis of Stator End-Winding Leakage Inductance of an Induction Machine , 2009, IEEE Transactions on Magnetics.

[36]  K. K. Schwarz,et al.  Survey of basic stray losses in squirrel-cage induction motors , 1964 .

[37]  A. Arkkio,et al.  Validation of a Time-Harmonic Numerical Model for Solving Magnetic Field in End Region of a Radial-Flux Machine , 2009, IEEE Transactions on Magnetics.

[38]  Zhe Chen,et al.  Overview of different wind generator systems and their comparisons , 2008 .

[39]  P. L. Alger,et al.  Stray-Load Losses in Polyphase Induction Maclines , 1959, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[40]  G. Diaz,et al.  Analytical Interpretation and Quantification of Rotational Losses in Stator Cores of Induction Motors , 2007, IEEE Transactions on Magnetics.

[41]  João A. C. Fong,et al.  Standards for Efficiency of Electric Motors , 2011, IEEE Industry Applications Magazine.

[42]  Charles R. Sullivan.  Cost-constrained selection of strand diameter and number in a Litz-wire transformer winding , 1998 .

[43]  G. H. Rockwood.  Calculation of stray load losses , 1927, Transactions of the American Institute of Electrical Engineers.

[44]  A. B. Field.  Eddy Currents in Large Slot-Wound Conductors , Transactions of the American Institute of Electrical Engineers.

[45]  Thomas M. Jahns,et al.  Analysis of Rotor Core Eddy-Current Losses in Interior Permanent Magnet Synchronous Machines , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[46]  W. N. Fu,et al.  Computation of harmonic stray losses of induction motors using adaptive time stepping finite element method together with externally coupled circuits , 1995 .

[47]  J. Partanen,et al.  FEM calculation of rotor losses in a medium speed direct torque controlled PM synchronous motor at different load conditions , 2002 .

[48]  D. Hawkins,et al.  Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load , 2012, IEEE Transactions on Magnetics.

[49]  M. Chiampi,et al.  An improved estimation of iron losses in rotating electrical machines , 1991 .

[50]  Yingying Yao,et al.  3-D eddy current analysis in the end region of a turbogenerator by using reduced magnetic vector potential , 2006, IEEE Transactions on Magnetics.

[51]  Marian K. Kazimierczuk,et al.  High-Frequency Magnetic Components , 2009 .

[52]  P. Viarouge,et al.  Accurate analytical model of winding losses in round Litz wire windings , 2001 .

[53]  Waldo V. Lyon.  Heat Losses in the Conductors of Alternating-Current Machines , 1921, Transactions of the American Institute of Electrical Engineers.

[54]  J. Pyrhonen,et al.  Comparison between models for eddy-current loss calculations in rotor surface-mounted permanent magnets , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[55]  Albert Foggia,et al.  Surface impedance method applied to the prediction of eddy currents in hydrogenerator stator end regions , 1995 .

[56]  G. Traxler-Samek,et al.  Influence of higher harmonics in the end region magnetic field on eddy currents in the stator clamping system of hydro generators , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[57]  Tim C. Green,et al.  Estimating rotational iron losses in an induction machine , 2003 .

[58]  Ayman M. EL-Refaie,et al.  Rotor end losses in multi-phase fractional-slot concentrated-winding permanent magnet synchronous machines , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[59]  G.S. Dimitrakakis,et al.  High-Frequency Copper Losses in Magnetic Components With Layered Windings , 2009, IEEE Transactions on Magnetics.

[60]  W.. Nick,et al.  Operational Experience With the World's First 3600 rpm 4 MVA Generator at Siemens , 2007, IEEE Transactions on Applied Superconductivity.

[61]  Marian K. Kazimierczuk,et al.  Winding resistance of litz-wire and multi-strand inductors , 2012 .

[62]  R.D. Findlay,et al.  Stray Losses in Induction Machines: Part II, Calculation and Reduction , 1985, IEEE Transactions on Power Apparatus and Systems.

[63]  F. Blaabjerg,et al.  Power electronics control of wind energy in distributed power systems , 2008, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment.

[64]  P. Pillay,et al.  Comparison of lamination iron losses supplied by PWM voltages: US and European experiences , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[65]  Sohrab Asgarpoor,et al.  Voltage analysis of distribution systems with DFIG wind turbines , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[66]  S. Morimoto,et al.  Prediction of iron loss in rotating machines with rotational loss included , 2003 .

[67]  Yang Guijie,et al.  Calculation and analysis of 3D magnetic field for end region of large turbogenerators , 2005, 2005 International Conference on Electrical Machines and Systems.

[68]  M.P. Perry.  Multiple Layer Parallel Connected Air-Core Inductor Design , 1979, IEEE Transactions on Power Apparatus and Systems.

[69]  H. C. Karmaker.  Stray losses in large synchronous machines , 1992 .

[70]  P. Richardson.  Stray losses in synchronous electrical machinery , 1945 .

[71]  M. Perry,et al.  Multiple Layer Series Connected Winding Design for Minimum Losses , 1979, IEEE Transactions on Power Apparatus and Systems.

[72]  P. L. Dowell,et al.  Effects of eddy currents in transformer windings , 1966 .

[73]  M. Andriollo,et al.  Procedures for the additional losses assessment and analysis in high-efficiency induction machines , 2011, 2011 International Conference on Clean Electrical Power (ICCEP).

[74]  C.R. Sullivan,et al.  An Equivalent Complex Permeability Model for Litz-Wire Windings , 2009, IEEE Transactions on Industry Applications.

[75]  E. Schmidt,et al.  Modelling and precalculation of additional losses of inverter fed asynchronous induction machines of traction drives , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[76]  R. L. Winchester.  Stray Losses in the Armature End Iron of Large Turbine Generators [includes discussion] , 1955, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[77]  G. W. Buckley,et al.  An integrated approach for the calculation of losses and temperatures in the end-region of large turbine generators , 1990 .

[78]  Charles R. Sullivan,et al.  Stranded wire with uninsulated strands as a low-cost alternative to litz wire , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[79]  Shuangxia Niu,et al.  Eddy Current Reduction in High-Speed Machines and Eddy Current Loss Analysis With Multislice Time-Stepping Finite-Element Method , 2012, IEEE Transactions on Magnetics.

[80]  K. Atallah,et al.  A Brushless Permanent Magnet Machine With Integrated Differential , 2011, IEEE Transactions on Magnetics.

[81]  Y. Perriard,et al.  A simplified determination of the permanent magnet (PM) eddy current losses due to slotting in a PM rotating motor , 2008, 2008 International Conference on Electrical Machines and Systems.

[82]  Charles R. Sullivan.  Optimal choice for number of strands in a litz-wire transformer winding , 1997 .

[83]  Antero Arkkio,et al.  Axial Flux and Eddy-Current Loss in Active Region of a Large-Sized Squirrel-Cage Induction Motor , 2010, IEEE Transactions on Magnetics.

[84]  K. Takahashi,et al.  Three Dimensional Harmonic Field and Eddy Current Analysis for Rotor End Region of Turbine Generator , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[85]  Shuangxia Niu,et al.  A Novel Direct-Drive Dual-Structure Permanent Magnet Machine , 2010, IEEE Transactions on Magnetics.

[86]  Yujing Liu,et al.  Engineering considerations on additional iron losses due to rotational fields and sheet cutting , 2008, 2008 18th International Conference on Electrical Machines.

[87]  Valéria Hrabovcová,et al.  Design of Rotating Electrical Machines , 2009 .

[88]  T. H. Barton,et al.  The measurement of induction-motor stray loss and its effect on performance , 1958 .

[89]  S. L. Ho,et al.  Estimation of stray losses of skewed rotor induction motors using coupled 2-D and 3-D time stepping finite element methods , 1998 .

[90]  Jianguo Zhu,et al.  Improved formulations for rotational core losses in rotating electrical machines , 1998 .

[91]  Thierry Gautreau.  ESTIMATION DES PERTES FER DANS LES MACHINES ELECTRIQUES. MODELE D'HYSTERESIS LOSS SURFACE ET APPLICATION AUX MACHINES SYNCHRONES A AIMANTS. , 2005 .

[92]  Ronnie Belmans,et al.  Squirrel cage induction motor end effects using 2D and 3D finite elements , 1995 .

[93]  A.T. de Almeida,et al.  Comparative analysis of IEEE 112-B and IEC 34-2 efficiency testing standards using stray load losses in low voltage three-phase, cage induction motors , 2001, 2001 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record (Cat. No.01CH37226).

[94]  Charles R. Sullivan,et al.  An improved calculation of proximity-effect loss in high-frequency windings of round conductors , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[95]  João A. C. Fong,et al.  Standards for Super-Premium Efficiency class for electric motors , 2009, Conference Record 2009 IEEE Industrial & Commercial Power Systems Technical Conference.

[96]  K. K. Schwarz.  Stray losses in squirrel-cage induction motors , 1964 .

[97]  Fred C. Lee,et al.  A high frequency model for Litz wire for switch-mode magnetics , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[98]  Toru Otaka,et al.  Eddy current analysis in the stator end structures of large capacity turbine generators , 2009, 2009 International Conference on Electrical Machines and Systems.

[99]  Peter Sergeant,et al.  Influence of Soft Magnetic Material in a Permanent Magnet Synchronous Machine With a Commercial Induction Machine Stator , 2012, IEEE Transactions on Magnetics.

[100]  Diego Puyal,et al.  Frequency-dependent resistance in Litz-wire planar windings for domestic induction heating appliances , 2006, IEEE Transactions on Power Electronics.

[101]  P. Rafajdus,et al.  Harmonic Loss Calculation in Rotor Surface Permanent Magnets—New Analytic Approach , 2012, IEEE Transactions on Magnetics.

[102]  J. A. Ferreira.  Analytical computation of AC resistance of round and rectangular litz wire windings , 1992 .

[103]  Y. Amara,et al.  Analytical Prediction of Open-Circuit Eddy-Current Loss in Series Double Excitation Synchronous Machines , 2011, IEEE Transactions on Magnetics.

[104]  K. Muramatsu,et al.  Coupled 2-D and 3-D Eddy Current Analyses for Evaluating Eddy Current Loss of a Permanent Magnet in Surface PM Motors , 2012, IEEE Transactions on Magnetics.

[105]  Andreas Krings,et al.  Overview and Comparison of Iron Loss Models for Electrical Machines , 2010 .

[106]  E. A. Hanney.  Heat losses due to load current in direct-current armature windings , 1932 .

[107]  Siu Lau Ho,et al.  Inclusion of interbar currents in a network-field coupled time-stepping finite-element model of skewed-rotor induction motors , 1999 .

[108]  Henk Polinder,et al.  Eddy-current losses in the segmented surface-mounted magnets of a PM machine , 1999 .

[109]  John Baird.  Eddy-Current Losses in Induction Motor End-Turn Clamping Rings [includes discussion] , 1954, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[110]  M. Pinilla.  Performance Improvement in a Renewable Energy Direct Drive Permanent Magnet Machine by means of Soft Magnetic Composite Interpoles , 2012, IEEE Transactions on Energy Conversion.

[111]  Z. Zhu,et al.  Rotor Eddy Current Loss Calculation and Thermal Analysis of Permanent Magnet Motor and Generator , 2011, IEEE Transactions on Magnetics.

[112]  Kaiyuan Lu,et al.  Torque Analysis With Saturation Effects for Non-Salient Single-Phase Permanent-Magnet Machines , 2011, IEEE Transactions on Magnetics.

[113]  M. Pinilla,et al.  Selection of Main Design Variables for Low-Speed Permanent Magnet Machines Devoted to Renewable Energy Conversion , 2011, IEEE Transactions on Energy Conversion.

[114]  Valter Mariani Primiani,et al.  Modelling of a Litz-wire planar winding , 2010 .

[115]  C. N. Glew.  Stray load losses in induction motors; a challenge to academia , 1997 .