Synergistic effect of active-passive methods using fins surface roughness and fluid flow for improving cooling performance of heat sink heat pipes

[1]  M. R. Malayeri,et al.  Deposition of CaSO4 on structured surfaces during convective heat transfer for utilization in micro heat exchangers , 2023, Experimental Heat Transfer.

[2]  V. P. Budaev,et al.  Heat Transfer on Micro and Nanostructured Rough Surfaces Synthesized by Plasma , 2022, Symmetry.

[3]  E. Eid,et al.  Experimental Investigation of The Influence of Modifying the Inner Tube Outer Surface on Free Convection in A Concentrated Double Pipe , 2022, Experimental Heat Transfer.

[4]  W. Li,et al.  Experimental study on the heat transfer characteristics of separate heat pipes , 2022, Experimental Heat Transfer.

[5]  G. Longo,et al.  Shape optimization of lattice-frame materials obtained via additive manufacturing during air forced convection , 2022, Experimental Heat Transfer.

[6]  Mihir Kumar das,et al.  Two phase heat transfer performance intensification of massecuite over bidirectional microstructure surfaces , 2022, Experimental heat transfer.

[7]  Girish Kumar Marri,et al.  Effect of phase change temperatures and orientation on the thermal performance of a miniaturized PCM heat sink coupled heat pipe , 2022, Experimental Heat Transfer.

[8]  H. Hassan,et al.  Experimental study of using system of flat heat pipe-phase change material inclusion heat sink for thermal regulation of simulated PV , 2022, Experimental Heat Transfer.

[9]  Bo Zhang,et al.  Effect of unidirectional surface roughness on heat transfer performance of spray cooling , 2022, Experimental Heat Transfer.

[10]  Wei Liu,et al.  Tuning surface wettability of Al and its correlation with short and long term corrosion resistance in saline solutions , 2021, Surface and Coatings Technology.

[11]  H. Saffari,et al.  Experimental parametric study of hierarchical micro/nano electrodeposited (six-step) pattern with respect to volcano-shape morphology in pool boiling performance augmentation , 2021, Experimental Heat Transfer.

[12]  Chi-Chuan Wang,et al.  Performance of displaced fin heatsink in natural convection subject to upward and downward arrangement , 2021 .

[13]  Nima Mazaheri,et al.  Employing elliptical pin-fins and nanofluid within a heat sink for cooling of electronic chips regarding energy efficiency perspective , 2021 .

[14]  M. Mohammadi,et al.  Heat transfer enhancement of conventional aluminum heat sinks with an innovative, cost-effective, and simple chemical roughening method , 2020 .

[15]  M. Sardarabadi,et al.  A new design of liquid-cooled heat sink by altering the heat sink heat pipe application: Experimental approach and prediction via artificial neural network , 2020 .

[16]  A. Davoodi,et al.  Fabrication of micro–nano-roughened surface with superhydrophobic character on an aluminium alloy surface by a facile chemical etching process , 2019, Bulletin of Materials Science.

[17]  Mohammad J. Amani,et al.  Experimental study of cooling characteristics of water-based alumina nanofluid in a minichannel heat sink , 2019, Case Studies in Thermal Engineering.

[18]  Xinyan Xiao,et al.  Preparation of corrosion-resisting superhydrophobic surface on aluminium substrate , 2019 .

[19]  P. Singh,et al.  Study of thermal and hydraulic performance of air cooled minichannel heatsink with novel geometries , 2019, International Communications in Heat and Mass Transfer.

[20]  S. Ekkad,et al.  Effect of micro-roughness shapes on jet impingement heat transfer and fin-effectiveness , 2019, International Journal of Heat and Mass Transfer.

[21]  H. Ali,et al.  Air cooled heat sink geometries subjected to forced flow: A critical review , 2019, International Journal of Heat and Mass Transfer.

[22]  H. Ali,et al.  Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems , 2018, International Journal of Heat and Mass Transfer.

[23]  Mohammad Reza Safaei,et al.  Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks , 2018, International Journal of Heat and Mass Transfer.

[24]  Yong Li,et al.  Review of applications and developments of ultra-thin micro heat pipes for electronic cooling , 2018, Applied Energy.

[25]  R. Abd‐Alhameed,et al.  Improved thermal management of computer microprocessors using cylindrical-coordinate micro-fin heat sink with artificial surface roughness , 2018, Engineering Science and Technology, an International Journal.

[26]  M. Jabbal,et al.  Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter , 2018 .

[27]  T. Karabacak,et al.  Boiling heat transfer performance enhancement using micro and nano structured surfaces for high heat flux electronics cooling systems , 2017 .

[28]  J. Selvaraj,et al.  Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink , 2017 .

[29]  Ashiqur Rahman,et al.  An overview of cooling of thermoelectric devices , 2017 .

[30]  W. Yan,et al.  Heat transfer enhancement in microchannel heat sink by wavy channel with changing wavelength/amplitude , 2017 .

[31]  M. Sardarabadi,et al.  Experimental investigation of the effects of using nano/phase change materials (NPCM) as coolant of electronic chipsets, under free and forced convection , 2017 .

[32]  Zheng Guo,et al.  Fabrication of superhydrophobic surface with improved corrosion inhibition on 6061 aluminum alloy substrate , 2015 .

[33]  Rahman Saidur,et al.  Cooling performance investigation of electronics cooling system using Al2O3–H2O nanofluid ☆ , 2015 .

[34]  A. Almajid,et al.  Influence of SiO2 nanoparticles on hardness and corrosion resistance of electroless Ni–P coatings , 2015 .

[35]  F. Calignano,et al.  Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering , 2014 .

[36]  L. Chow,et al.  Microscale surface modifications for heat transfer enhancement. , 2013, ACS applied materials & interfaces.

[37]  S. Liang,et al.  Fabrication of nano-structured super-hydrophobic film on aluminum by controllable immersing method , 2012 .

[38]  Baitai Qian,et al.  Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[39]  M. Hayat,et al.  Influence of pretreatments on physicochemical properties of Ni-P coatings electrodeposited on aluminum alloy , 2021 .

[40]  M. Zhang,et al.  Enhanced heat transfer of heat sink channels with micro pin fin roughened walls , 2016 .

[41]  Yichun Xu,et al.  Dislocation distribution near the crack tip of I and II modes in bulk aluminum single crystal , 1991 .