CFD modelling of gas–liquid flow in an industrial scale gas-stirred leaching tank

Abstract The performance of a gas-stirred tank for cyanide leaching relies on the good mixing between solid particles and reagents, as well as sufficient oxygen mass transfer through gas bubbles. In this study, a gasliquid two phase computational fluid dynamics (CFD) model has been applied to investigate the gas-slurry flow in an industrial scale leaching tank. Following model validation using measurement data from a laboratory gas-stirred reactor, the CFD model has been extended to study flow dynamics in an industrial scale Pachuca tank with different designs. The likely effects of the introduced gas bubble size and the draft tube diameter on tank performance are assessed in terms of the overall flow patterns, gas holdup, bubble residence time distribution, slurry mixing, as well as the solid sedimentation region. It was found that the slurry flow in the tank is dominated by strong global re-circulations with slurries being pumped up inside the riser, followed by a downward motion in the downcomer before re-joining the riser from the draft tube bottom. There are no local re-circulations observed in the riser and downcomer regions for the original design and the proposed new designs. The new design with either reducing the gas bubble size or increasing the draft tube diameter increases gas holdup, promotes solid mixing and reduces the solid sedimentation region. Simulation results obtained demonstrate the feasibility of the present modelling approach as a useful numerical tool to help potential improvement of industrial scale Pachuca tank design and/or operation.

[1]  Qinmin Pan,et al.  Residence Time Distribution in a Multistage Agitated Contactor with Newtonian Fluids: CFD Prediction and Experimental Validation , 2007 .

[2]  Qing Yuan,et al.  Local Hydrodynamics Modeling of a Gas−Liquid−Solid Three-Phase Airlift Loop Reactor , 2007 .

[3]  J. Merchuk,et al.  Mass transfer in a rectangular air‐lift reactor: Effects of geometry and gas recirculation , 1988, Biotechnology and bioengineering.

[4]  William Yang,et al.  Development of Bubble Driven Flow CFD Model Applied for Aluminium Smelting Cells , 2010 .

[5]  Kaiyu Zhang,et al.  Computational Fluid Dynamics (CFD) Modeling of Bubble Dynamics in the Aluminum Smelting Process , 2013 .

[6]  Hirokazu Kawabata,et al.  GAS HOLDUP AND VOLUMETRIC LIQUID-PHASE MASS TRANSFER COEFFICIENT IN A GEL-PARTICLE SUSPENDED BUBBLE COLUMN WITH DRAUGHT TUBE , 1985 .

[7]  Milorad P. Dudukovic,et al.  Numerical simulation of bubble columns flows: effect of different breakup and coalescence closures , 2005 .

[8]  Robert F. Mudde,et al.  Simulation of a slurry airlift using a two-fluid model , 2001 .

[9]  James W. Evans,et al.  Fluid flow in pachuca (air-agitated) tanks: Part I. Laboratory-scale experimental measurements , 1989 .

[10]  G. Deschênes,et al.  Effect of oxygen and lead nitrate on the cyanidation of a sulphide bearing gold ore , 1995 .

[11]  M.C.M. van Loosdrecht,et al.  Bubble recirculation regimes in an internal-loop airlift reactor , 1999 .

[12]  Jose C. Merchuk,et al.  Air‐lift reactor analysis: Interrelationships between riser, downcomer, and gas‐liquid separator behavior, including gas recirculation effects , 1986 .

[13]  Wei Ge,et al.  A conceptual model for analyzing the stability condition and regime transition in bubble columns , 2010 .

[14]  G. Evans,et al.  Numerical modelling of gas-liquid flow in stirred tanks , 2005 .

[15]  V. Buwa,et al.  Volume-of-fluid (VOF) simulations of rise of single/multiple bubbles in sheared liquids , 2010 .

[16]  Mandar Tabib,et al.  Quantifying sub-grid scale (SGS) turbulent dispersion force and its effect using one-equation SGS large eddy simulation (LES) model in a gas–liquid and a liquid–liquid system , 2011 .

[17]  José A. Teixeira,et al.  CFD simulation and experimental measurement of gas holdup and liquid interstitial velocity in internal loop airlift reactor , 2011 .

[18]  Jinghai Li,et al.  Multi-scale analysis of gas-liquid interaction and CFD simulation of gas-liquid flow in bubble columns , 2011 .

[19]  G. Senanayake,et al.  The effects of dissolved oxygen and cyanide dosage on gold extraction from a pyrrhotite-rich ore , 2004 .

[20]  G. Eigenberger,et al.  Simulation of Buoyancy Driven Bubbly Flow: Established Simplifications and Open Questions (Journal Review) , 2004 .

[21]  Wei Ge,et al.  Explorations on the multi-scale flow structure and stability condition in bubble columns , 2007 .

[22]  Rajiv Shekhar,et al.  Particle suspension in (air-agitated) pachuca tanks , 1998 .

[23]  Ludovic Raynal,et al.  Studies of gas–liquid flow through reactors internals using VOF simulations , 2001 .

[24]  W. J. Turner,et al.  Applicability of the standard k-ϵ turbulence model to gas-stirred baths , 1988 .

[25]  I. Kataoka,et al.  Basic equations of turbulence in gas-liquid two-phase flow , 1989 .

[26]  N. Zuber,et al.  Drag coefficient and relative velocity in bubbly, droplet or particulate flows , 1979 .

[27]  Ashis Kumar Bera,et al.  Effect of design and operating parameters on gas hold-up in Pachuca (air-agitated) tanks , 2000 .