Embedded Input Shaper: Difference between Trapezoidal Profile and S-curve Profile

[1]  Juyi Park,et al.  Development of negative Input Shaping Technique for MIMO System , 2000 .

[2]  William Singhose,et al.  Comparison of robust input shapers , 2008 .

[3]  Kyung-Soo Kim,et al.  An impulse-time perturbation approach for enhancing the robustness of extra-insensitive input shapers , 2013, Autom..

[4]  Kyung-Soo Kim,et al.  Robust Zero Placement for Motion Control of Lightly Damped Systems , 2013, IEEE Transactions on Industrial Electronics.

[5]  Huaizhong Li,et al.  Motion Profile Design to Reduce Residual Vibration of High-Speed Positioning Stages , 2009, IEEE/ASME Transactions on Mechatronics.

[6]  Park Kyoung-Woo,et al.  Antisymmetric S-curve Profile for Fast and Vibrationless Motion , 2006 .

[7]  Shogo Tanaka,et al.  Automatic measurement and control of the attitude of crane lifters: Lifter-attitude measurement and control , 1998 .

[8]  Kyung-Soo Kim,et al.  Zero Placement of the Asymmetric S-curve Profile to Minimize the Residual Vibration , 2012 .

[9]  Wan Kyun Chung,et al.  Residual Vibration Suppression of a Beam-Mass-Cart System by Input Reshaping with a Robust Inernal-loop Compensator , 2001 .

[10]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[11]  Keun-Ho Rew,et al.  A practically efficient method for motion control based on asymmetric velocity profile , 2009 .

[12]  Tarunraj Singh,et al.  Design of input shapers using modal cost for multi-mode systems , 2010, Proceedings of the 2010 American Control Conference.