Characterization of microstructure and surface properties of hybrid coatings of WC–CoCr prepared by laser heat treatment and high velocity oxygen fuel spraying

[1]  Pornthep Chivavibul,et al.  Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings , 2007 .

[2]  H. S. Sidhu,et al.  Solid particle erosion of HVOF sprayed NiCr and Stellite-6 coatings , 2007 .

[3]  M. Barletta,et al.  Microstructural and tribological comparison of HVOF-sprayed and post-treated M–Mo–Cr–Si (M = Co, Ni) alloy coatings , 2007 .

[4]  S. Leen,et al.  Residual stresses in high-velocity oxy-fuel thermally sprayed coatings – Modelling the effect of particle velocity and temperature during the spraying process , 2007 .

[5]  O. Culha,et al.  Thermal stress analysis of HVOF sprayed WC-Co/NiAl multilayer coatings on stainless steel substrate using finite element methods , 2007 .

[6]  Zhang Jingxian,et al.  Effect of laser remelting on corrosion behavior of plasma-sprayed Ni-coated WC coatings , 2007 .

[7]  A. K. Maiti,et al.  Effect of adding WC powder to the feedstock of WC-Co-Cr based HVOF coating and its impact on erosion and abrasion resistance , 2007 .

[8]  H. Pokhmurska,et al.  Development and trends in HVOF spraying technology , 2006 .

[9]  J. Murthy,et al.  Abrasive wear behaviour of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes , 2006 .

[10]  J. Bieniaś,et al.  Microstructure and mechanical properties of ceramic coatings on Ti and Ti-based alloy , 2004 .

[11]  Lidong Zhao,et al.  Study of HVOF spraying of WC–CoCr using on-line particle monitoring , 2004 .

[12]  Lidong Zhao,et al.  Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr , 2004 .

[13]  A. Igartua,et al.  Mechanical and tribological properties of high velocity oxy-fuel thermal sprayed nanocrystalline CrCNiCr coatings , 2003 .

[14]  G. Appa Rao,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 , 2003 .

[15]  P. Shipway,et al.  Sliding wear behaviour of HVOF sprayed WC-Co coatings deposited with both gas-fuelled and liquid-fuelled systems , 2003 .

[16]  B. S. Mann,et al.  Abrasive and erosive wear characteristics of plasma nitriding and HVOF coatings: their application in hydro turbines , 2001 .

[17]  Changhee Lee,et al.  Effects of heat treatment on the microstructure and properties of HVOF-sprayed Ni–Cr–W–Mo–B alloy coatings , 2000 .

[18]  J. Mateos,et al.  Tribological behaviour of plasma-sprayed WC coatings with and without laser remelting , 2000 .

[19]  Z. Qi,et al.  Evaluation of thermal shock strength of thermal-sprayed coatings by the laser irradiation technique , 1998 .

[20]  J. Martín,et al.  A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures , 1998 .

[21]  M. Yılmaz,et al.  Investigation of abrasive + erosive wear behaviour of surface hardening methods applied to AISI 1050 steel , 2006 .