Characterization of wood plastic composites made from landfill-derived plastic and sawdust: volatile compounds and olfactometric analysis.

Application of wood plastic composites (WPCs) obtained from recycled materials initially intended for landfill is usually limited by their composition, mainly focused on release of volatile organic compounds (VOCs) which could affect quality or human safety. The study of the VOCs released by a material is a requirement for new composite materials. Characterization and quantification of VOCs of several WPC produced with low density polyethylene (LDPE) and polyethylene/ethylene vinyl acetate (PE/EVA) films and sawdust were carried out, in each stage of production, by solid phase microextraction in headspace mode (HS-SPME) and gas chromatography-mass spectrometry (GC-MS). An odor profile was also obtained by HS-SPME and GC-MS coupled with olfactometry analysis. More than 140 compounds were observed in the raw materials and WPC samples. Some quantified compounds were considered WPC markers such as furfural, 2-methoxyphenol, N-methylphthalimide and 2,4-di-tert-butylphenol. Hexanoic acid, acetic acid, 2-methoxyphenol, acetylfuran, diacetyl, and aldehydes were the most important odorants. None of the VOCs were found to affect human safety for use of the WPC.

[1]  V. Arjunan,et al.  Structural, vibrational and DFT studies on 2-chloro-1H-isoindole-1,3(2H)-dione and 2-methyl-1H-isoindole-1,3(2H)-dione. , 2009, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[2]  T. Acree,et al.  Identification of odor-active compounds resulting from thermal oxidation of polyethylene , 1992 .

[3]  Philip H. Steele,et al.  Wood/plastic copyrolysis in an auger reactor: Chemical and physical analysis of the products , 2009 .

[4]  M. Aznar,et al.  Partition and diffusion of volatile compounds from acrylic adhesives used for food packaging multilayers manufacturing , 2010 .

[5]  Young-Kwon Park,et al.  Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed. , 2010, Bioresource technology.

[6]  C. Domeño,et al.  Sampling and analysis of volatile organic pollutants emitted by an industrial stack , 2004 .

[7]  S. Karlsson,et al.  Quality Assessments of Recycled Plastics by Spectroscopy and Chromatography , 2004, Chromatographia.

[8]  A. Dravnieks,et al.  Atlas of odor character profiles , 1992 .

[9]  P. Winterhalter,et al.  Characterisation of odour-active compounds in aged rum. , 2012, Food chemistry.

[10]  M. Díaz-Maroto,et al.  Aroma‐active compounds of American, French, Hungarian and Russian oak woods, studied by GC–MS and GC–O , 2008 .

[11]  R. Gupta,et al.  Wood–plastic composites formulated with virgin and recycled ABS , 2009 .

[12]  Andrea Buettner,et al.  Odor-active compounds in cardboard. , 2009, Journal of agricultural and food chemistry.

[13]  A. McDonald,et al.  Wood Modification Effects on Weathering of HDPE-Based Wood Plastic Composites , 2009 .

[14]  S. Buxaderas,et al.  Volatile and semi-volatile components of oak wood chips analysed by Accelerated Solvent Extraction (ASE) coupled to gas chromatography–mass spectrometry (GC–MS) , 2007 .

[15]  M. Meincken,et al.  The effect of wood extractives on the thermal stability of different wood-LLDPE composites , 2009 .

[16]  A. McDonald,et al.  Effect of wood species on property and weathering performance of wood plastic composites , 2010 .

[17]  A. Noble,et al.  Characterization of odor-active compounds in Californian chardonnay wines using GC-olfactometry and GC-mass spectrometry. , 2003, Journal of agricultural and food chemistry.

[18]  D. Dubourdieu,et al.  Identification of substances responsible for the ‘sawdust’ aroma in oak wood , 1998 .

[19]  Diène Ndiaye,et al.  Durability of wood polymer composites: Part 1. Influence of wood on the photochemical properties , 2008 .

[20]  T. Shibamoto,et al.  Aroma chemicals isolated and identified from leaves of Aloe arborescens Mill. Var. Natalensis Berger. , 1999, Journal of agricultural and food chemistry.

[21]  R A Ford,et al.  Estimation of toxic hazard--a decision tree approach. , 1978, Food and cosmetics toxicology.

[22]  M. Tena,et al.  Development of a headspace solid-phase microextraction-gas chromatography-mass spectrometry method for the identification of odour-causing volatile compounds in packaging materials. , 2002, Journal of chromatography. A.

[23]  A. McDonald,et al.  Effects of wood species on durability and chemical changes of fungal decayed wood plastic composites , 2011 .

[24]  M. Aznar,et al.  Study of hotmelt adhesives used in food packaging multilayer laminates. Evaluation of the main factors affecting migration to food , 2011 .

[25]  S. Karlsson,et al.  Emission of possible odourous low molecular weight compounds in recycled biofibre/polypropylene composites monitored by head-space SPME-GC-MS , 2005 .

[26]  C. Nerín,et al.  Kinetic migration studies using Porapak as solid-food simulant to assess the safety of paper and board as food-packaging materials , 2007, Analytical and bioanalytical chemistry.

[27]  Alireza Ashori,et al.  Wood-plastic composites as promising green-composites for automotive industries! , 2008, Bioresource technology.

[28]  F. Mangani,et al.  Furniture wood wastes: experimental property characterisation and burning tests. , 2009, Waste management.

[29]  Amir Nourbakhsh,et al.  Characteristics of wood-fiber plastic composites made of recycled materials. , 2009, Waste management.

[30]  C. Nerín,et al.  Migration of organic compounds from a multilayer plastic–paper material intended for food packaging , 2007, Analytical and bioanalytical chemistry.

[31]  M. Wolcott,et al.  Wood plastic composites weathering: Visual appearance and chemical changes , 2008 .

[32]  Chul B. Park,et al.  Study on cell nucleation behavior of HDPE–wood composites/supercritical CO2 solution based on rheological properties , 2011 .

[33]  J. Markarian.  Outdoor living space drives growth in wood-plastic composites , 2008 .

[34]  C. Schwarzinger,et al.  Analysis of wood polymer composites by two-stage pyrolysis-GC/MS , 2008 .

[35]  J. Tirillò,et al.  Hybrid recycled glass fiber/wood flour thermoplastic composites: Manufacturing and mechanical characterization , 2011 .