Preparation and hot corrosion behaviour of two Co modified NiAl coatings on a Ni-based superalloy

[1]  Chungen Zhou,et al.  Hot corrosion behavior of Co modified NiAl coating on nickel base superalloys , 2012 .

[2]  Chungen Zhou,et al.  Codeposition of Co and Al on nickel base superalloys by pack cementation process , 2012 .

[3]  F. Pettit,et al.  Compositional effects on the Type I hot corrosion of β-NiAl alloys , 2011 .

[4]  Fu-hui Wang,et al.  Cyclic Oxidation and Hot Corrosion Behavior of Y/Cr-Modified Aluminide Coatings Prepared by a Hybrid Slurry/Pack Cementation Process , 2011 .

[5]  Kangwei Zhang,et al.  Hot corrosion behaviour of a cobalt-base super-alloy K40S with and without NiCrAlYSi coating , 2011 .

[6]  W. Wang,et al.  Microstructure and oxidation behaviour of an AlSiY/NiCrAlYSi composite coating at 1150 degrees C , 2011 .

[7]  K. Shirvani,et al.  The structure and high temperature corrosion performance of medium-thickness aluminide coatings on nickel-based superalloy GTD-111 , 2010 .

[8]  Hong Li,et al.  High temperature corrosion behaviour of a gradient NiCoCrAlYSi coating II: Oxidation and hot corrosion , 2010 .

[9]  T. Xiong,et al.  Preparation and hot corrosion behaviour of an Al-gradient NiCoCrAlYSiB coating on a Ni-base superalloy , 2009 .

[10]  Y. Wang,et al.  Synthesis of simple and platinum-modified aluminide coatings on cobalt (Co)-base superalloys via a vapor phase aluminizing process , 2008 .

[11]  K. Ishida,et al.  Phase Equilibria and Microstructure on γ' Phase in Co-Ni-Al-W System , 2008 .

[12]  W. Sloof,et al.  Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions , 2005 .

[13]  P. De,et al.  A kinetic model for iron aluminide coatings by low-pressure chemical vapor deposition - Part I. Deposition kinetics , 2004 .

[14]  P. Ke,et al.  Hot corrosion behavior of AIP NiCoCrAlY(SiB) coatings on nickel base superalloys , 2004 .

[15]  P. K. Datta,et al.  Codeposition of Al and Si on nickel base superalloys by pack cementation process , 2003 .

[16]  Noam Eliaz,et al.  Hot corrosion in gas turbine components , 2002 .

[17]  P. S. Liu,et al.  High-temperature oxidation behavior of aluminide coatings on a new cobalt-base superalloy in air , 2001 .

[18]  G. Angelopoulos,et al.  Formation of aluminide coatings on nickel by a fluidised bed CVD process , 2001 .

[19]  A. Crosky,et al.  Interdiffusion behaviour in aluminide-coated René 80H at 1150°C , 1997 .

[20]  D. Young,et al.  Co-deposited chromium-aluminide coatings. III. Origins of non- equilibrium effects , 1997 .

[21]  P. K. Datta,et al.  The high temperature corrosion behaviour of Hf modified chromo-aluminised coatings produced by a single step process , 1996 .

[22]  D. Young,et al.  Calculation of precipitate dissolution zone kinetics in oxidising binary two-phase alloys , 1996 .

[23]  K. Ishida,et al.  Partition of alloying elements between γ (A1), γ′ (L12), and β (B2) phases in Ni-Al base systems , 1994 .

[24]  D. Ellis.  Hot corrosion of the B2 nickel aluminides , 1993 .

[25]  D. Young,et al.  The hot-corrosion behavior of novel CO-deposited chromium-modified aluminide coatings , 1992 .

[26]  J. Smialek.  Adherent Al2O3 scales formed on undoped nicrai alloys , 1987 .

[27]  G. W. Goward.  Protective coatings – purpose, role, and design , 1986 .

[28]  D. A. Shores,et al.  The Effect of SO 2 and NaCl on High Temperature Hot Corrosion , 1978 .

[29]  C. Wagner.  Theoretical Analysis of the Diffusion Processes Determining the Oxidation Rate of Alloys , 1952 .