Modeling and co-simulation of a parabolic trough solar plant for industrial process heat

In the present paper a tri-dimensional non-linear dynamic thermohydraulic model of a parabolic trough collector was developed in the high-level acausal object-oriented language Modelica and coupled to a solar industrial process heat plant modeled in TRNSYS. The integration is performed in an innovative co-simulation environment based on the TLK interconnect software connector middleware. A discrete Monte Carlo ray-tracing model was developed in SolTrace to compute the solar radiation heterogeneous local concentration ratio in the parabolic trough collector absorber outer surface. The obtained results show that the efficiency predicted by the model agrees well with experimental data with a root mean square error of 1.2%. The dynamic performance was validated with experimental data from the Acurex solar field, located at the Plataforma Solar de Almeria, South-East Spain, and presents a good agreement. An optimization of the IST collector mass flow rate was performed based on the minimization of an energy loss cost function showing an optimal mass flow rate of 0.22kg/sm2. A parametric analysis showed the influence on collector efficiency of several design properties, such as the absorber emittance and absorptance. Different parabolic trough solar field model structures were compared showing that, from a thermal point of view, the one-dimensional model performs close to the bi-dimensional. Co-simulations conducted on a reference industrial process heat scenario on a South European climate show an annual solar fraction of 67% for a solar plant consisting on a solar field of 1000m2, with thermal energy storage, coupled to a continuous industrial thermal demand of 100kW.

[1]  Gordon H. Spencer,et al.  General ray-tracing procedure , 1962 .

[2]  Assensi Oliva,et al.  Wind speed effect on the flow field and heat transfer around a parabolic trough solar collector , 2014 .

[3]  M. Modest.  Radiative heat transfer , 1993 .

[4]  R. Forristall,et al.  Heat Transfer Analysis and Modeling of a Parabolic Trough Solar Receiver Implemented in Engineering Equation Solver , 2003 .

[5]  Clifford K. Ho,et al.  Software and codes for analysis of concentrating solar power technologies. , 2008 .

[6]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[7]  Stephen E. Zitney.  Process/equipment co-simulation for design and analysis of advanced energy systems , 2010, Comput. Chem. Eng..

[8]  M. M. Rahman,et al.  Heat transfer analysis of parabolic trough solar receiver , 2011 .

[9]  G. C. Bakos,et al.  Design, optimisation and conversion-efficiency determination of a line-focus parabolic-trough solar-collector (PTC) , 2001 .

[10]  Eduardo Zarza,et al.  Experimental Assessment of a Small-Sized Parabolic-Trough Collector CAPSOL Project , 2010 .

[11]  Celestino Ordóñez,et al.  Estimating intercept factor of a parabolic solar trough collector with new supporting structure using off-the-shelf photogrammetric equipment , 2012 .

[12]  Manuel Berenguel,et al.  Advanced control of solar plants , 1997 .

[13]  Sandia Report,et al.  Software and Codes for Analysis of Concentrating Solar Power Technologies , 2008 .

[14]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[15]  Weiwei Yang,et al.  Simulation of the parabolic trough solar energy generation system with Organic Rankine Cycle , 2012 .

[16]  H. Gonçalves,et al.  The Potential of Solar Heat in Industrial Processes. A State of the Art Review for Spain and Portugal , 2000 .

[17]  C F Kutscher.  Detailed design procedure for solar industrial-process-heat systems: overview , 1982 .

[18]  Polyvios Eleftheriou,et al.  Design and performance characteristics of a parabolic-trough solar-collector system , 1994 .

[19]  Soteris A. Kalogirou,et al.  The potential of solar industrial process heat applications , 2003 .

[20]  A. Bejan,et al.  Heat transfer handbook , 2003 .

[21]  Michael Wetter,et al.  Co-simulation for performance prediction of integrated building and HVAC systems - An analysis of solution characteristics using a two-body system , 2010, Simul. Model. Pract. Theory.

[22]  Jan Hensen,et al.  An implementation of co-simulation for performance prediction of innovative integrated HVAC systems in buildings , 2010 .

[23]  Frank Kreith,et al.  Handbook of energy efficiency and renewable energy , 2007 .

[24]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[25]  A. J. Al-Khalili,et al.  Mathematical analysis of the performance of cylindrical-parabolic solar concentrators , 1983 .

[26]  K.G.T. Hollands,et al.  A General Method of Obtaining Approximate Solutions to Laminar and Turbulent Free Convection Problems , 1975 .

[27]  S. Jeter.  Analytical determination of the optical performance of practical parabolic trough collectors from design data , 1987 .

[28]  A. Thomas,et al.  Solar steam generating systems using parabolic trough concentrators , 1996 .

[29]  V. Dudley,et al.  Test results, Industrial Solar Technology parabolic trough solar collector , 1995 .

[30]  Soteris A. Kalogirou,et al.  Parabolic trough collectors for industrial process heat in Cyprus , 2002 .

[31]  Peter A. Fritzson,et al.  Principles of object-oriented modeling and simulation with Modelica 2.1 , 2004 .

[32]  Eduardo Zarza,et al.  Parabolic-trough solar collectors and their applications , 2010 .

[33]  Eduardo Zarza,et al.  Theoretical basis and experimental facility for parabolic trough collectors at high temperature using gas as heat transfer fluid , 2014 .

[34]  Manuel Berenguel,et al.  Control of Solar Energy Systems , 2012 .

[35]  Robert Pitz-Paal,et al.  Solar Thermal Plants - Power and Processs Heat , 2000 .