On the role of forces governing particulate interactions in pharmaceutical systems: A review.
暂无分享,去创建一个
[1] The detection of radicals in strained, high-modulus polyethylene fibres , 1995 .
[2] B. Chaudhuri,et al. Mechanisms of electrostatic charge reduction of granular media with additives on different surfaces , 2012 .
[3] Bruno C. Hancock,et al. An experimental and numerical modeling study of tribocharging in pharmaceutical granular mixtures , 2016 .
[4] R. Davé,et al. On the origin of non-linear breakage kinetics in dry milling ☆ , 2015 .
[5] Colin Thornton,et al. A Theoretical Study of the Liquid Bridge Forces between Two Rigid Spherical Bodies , 1993 .
[6] E. A. Hill,et al. An experimental investigation of triboelectrification in cohesive and non-cohesive pharmaceutical powders , 1992 .
[7] J. Israelachvili. Intermolecular and surface forces , 1985 .
[8] A. C. Hoffmann,et al. An Eulerian–Lagrangian model for dense particle clouds , 2007 .
[9] Carlos I. Calle,et al. Calculating the trajectories of triboelectrically charged particles using Discrete Element Modeling (DEM) , 2008 .
[10] M. Adams,et al. Numerical analysis of contact electrification using DEM-CFD , 2013 .
[11] Aibing Yu,et al. Particle-scale modelling of gas-solid flow in fluidisation † , 2003 .
[12] Andrew P Grima,et al. Development and validation of calibration methods for discrete element modelling , 2011 .
[13] Ignacio Pagonabarraga,et al. Role of particle shape on the stress propagation in granular packings. , 2009, Physical review letters.
[14] S. Luding. Cohesive, frictional powders: contact models for tension , 2008 .
[15] B. J. Ennis,et al. Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review , 2001 .
[16] James D. Litster,et al. Population balance modelling of drum granulation of materials with wide size distribution , 1995 .
[17] Fernando J. Muzzio,et al. Constitutive model to predict flow of cohesive powders in bench scale hoppers , 2010 .
[18] J. Dodds,et al. Wall friction in the compaction of pharmaceutical powders: measurement and effect on the density distribution , 2004 .
[19] A. Diaz. Contact electrification of materials : The chemistry of ions on polymer surfaces , 1998 .
[20] J. Staniforth,et al. Powder mixing by triboelectrification , 1981 .
[21] Fabien Cherblanc,et al. Influence of liquid bridges on the mechanical behaviour of polydisperse granular materials , 2006 .
[22] P. I. Barton,et al. Effective parameter estimation within a multi-dimensional population balance model framework , 2010 .
[23] I. C. Sinka,et al. Analysis of tablet compaction. II. Finite element analysis of density distributions in convex tablets. , 2004, Journal of pharmaceutical sciences.
[24] P. Cundall,et al. A discrete numerical model for granular assemblies , 1979 .
[25] Britt Halvorsen,et al. Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed , 2005, Comput. Chem. Eng..
[26] J. Brackbill,et al. A continuum method for modeling surface tension , 1992 .
[27] Warren H. Finlay,et al. The Mechanics of Inhaled Pharmaceutical Aerosols: An Introduction , 2001 .
[28] Bruno C. Hancock,et al. Numerical and experimental investigation of capping mechanisms during pharmaceutical tablet compaction , 2008 .
[29] Anders Axelsson,et al. Comparison of different flowability tests for powders for inhalation , 2004 .
[30] R. Davé,et al. Fluidization of coated group C powders , 2008 .
[31] P. Cleary,et al. The influence of particle shape on flow modes in pneumatic conveying , 2011 .
[32] G. Lu,et al. Discrete element models for non-spherical particle systems: From theoretical developments to applications , 2015 .
[33] Joseph J. McCarthy,et al. Numerical simulation of liquid transfer between particles , 2008 .
[34] D. Lacks,et al. Particle dynamics simulations of triboelectric charging in granular insulator systems , 2008 .
[35] J. Scannell,et al. Diagnosing the decline in pharmaceutical R&D efficiency , 2012, Nature Reviews Drug Discovery.
[36] James D. Litster,et al. Coalescence of deformable granules in wet granulation processes , 2000 .
[37] Antonio Ramos,et al. Flow Regimes in Fine Cohesive Powders , 1999 .
[38] R. G. Cox,et al. Slow viscous motion of a sphere parallel to a plane wall—I Motion through a quiescent fluid , 1967 .
[39] Wen-Ching Yang,et al. Modification and re-interpretation of Geldart's classification of powders , 2007 .
[40] S. Sundaresan,et al. Triboelectric charging of monodisperse particles in fluidized beds , 2017 .
[41] Shuji Matsusaka,et al. Electrostatics of particles , 2003 .
[42] K. Malone,et al. Determination of contact parameters for discrete element method simulations of granular systems , 2008 .
[43] G Rowley,et al. Quantifying electrostatic interactions in pharmaceutical solid systems. , 2001, International journal of pharmaceutics.
[44] Charles S. Campbell,et al. Granular material flows – An overview , 2006 .
[45] H. Hertz. Ueber die Berührung fester elastischer Körper. , 1882 .
[46] C A Coulomb,et al. ESSAI SUR UNE APPLICATION DES REGLES DE MAXIMIS ET MINIMIS A QUELQUES PROBLEMES DE STATIQUE RELATIFS A L'ARCHITECTURE (ESSAY ON MAXIMUMS AND MINIMUMS OF RULES TO SOME STATIC PROBLEMS RELATING TO ARCHITECTURE) , 1973 .
[47] Bijay K. Mishra,et al. A preliminary numerical investigation of agglomeration in a rotary drum , 2002 .
[48] Aibing Yu,et al. DEM study of the flow of cohesive particles in a screw feeder , 2014 .
[49] L. McCarty,et al. Electrostatic charging due to separation of ions at interfaces: contact electrification of ionic electrets. , 2008, Angewandte Chemie.
[50] C. R. Westgate,et al. The role of bulk traps in metal-insulator contact charging , 1974 .
[51] M. Ghadiri,et al. Strength and structure of granules produced in continuous granulators , 2013 .
[52] C. Campbell. Stress-controlled elastic granular shear flows , 2005, Journal of Fluid Mechanics.
[53] Jennifer S. Curtis,et al. Predicting the flow mode from hoppers using the discrete element method , 2009 .
[54] Sankaran Sundaresan,et al. The Effect of Static Electrification on Gas-Solid Flows in Vertical Risers , 2002 .
[55] Stephan Herminghaus,et al. Dynamics of wet granular matter , 2005 .
[56] Troy Shinbrot,et al. An observed correlation between flow and electrical properties of pharmaceutical blends , 2009 .
[57] Geoff Rowley,et al. The effect of moisture sorption on electrostatic charging of selected pharmaceutical excipient powders , 2003 .
[58] A H de Boer,et al. A critical view on lactose-based drug formulation and device studies for dry powder inhalation: which are relevant and what interactions to expect? , 2012, Advanced drug delivery reviews.
[59] Peter M. Ireland,et al. Triboelectrification of particulate flows on surfaces: Part I — Experiments , 2010 .
[60] R. Bagnold. Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shear , 1954, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[61] Seiji Saito,et al. Numerical simulation of electrostatic charge in powder pneumatic conveying process , 2003 .
[62] A. Hassanpour,et al. Drop test: A new method to measure the particle adhesion force , 2014 .
[63] Mojtaba Ghadiri,et al. Triboelectrification of pharmaceutical powders by particle impact. , 2007, International journal of pharmaceutics.
[64] Theodore L. Bergman,et al. Investigating mixing in a multi-dimensional rotary mixer: Experiments and simulations , 2010 .
[65] M. Mazumder,et al. Effects of surface properties on the tribocharging characteristics of polymer powder as applied to industrial processes , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).
[66] A. Yu,et al. Discrete particle simulation of particulate systems: Theoretical developments , 2007 .
[67] Lauren Briens,et al. The Effect of Moisture on the Flowability of Pharmaceutical Excipients , 2014, AAPS PharmSciTech.
[68] C. Campbell. Elastic granular flows of ellipsoidal particles , 2011 .
[69] Michael J. Hounslow,et al. A new capillary force model implemented in micro-scale CFD–DEM coupling for wet granulation , 2013 .
[70] B. V. Derjaguin,et al. Effect of contact deformations on the adhesion of particles , 1975 .
[71] Ariel R. Muliadi,et al. Modeling the powder roll compaction process: Comparison of 2-D finite element method and the rolling theory for granular solids (Johanson's model) , 2012 .
[72] Roland W. Lewis,et al. Powder compaction modelling via the discrete and finite element method , 2000 .
[73] Christine M. Hrenya,et al. Square-well model for cohesion in fluidized beds , 2006 .
[74] Runyu Yang,et al. DEM study of the transverse mixing of wet particles in rotating drums , 2013 .
[75] A. Diaz,et al. A semi-quantitative tribo-electric series for polymeric materials: the influence of chemical structure and properties , 2004 .
[76] Berend van Wachem,et al. Simulation of the Flow of Cohesive Particles in a Model Inhaler Using a CFD/DEM Model , 2015 .
[77] Mojtaba Ghadiri,et al. Electrification of an elastic sphere by repeated impacts on a metal plate , 2000 .
[78] A. Andersen,et al. News & views , 2004, European Journal of Nuclear Medicine.
[79] Christian Veje,et al. Stress Fluctuations in a 2D Granular Couette Experiment: A Continuous Transition , 1999 .
[80] C. Gallo,et al. Some charge exchange phenomena explained by a classical model of the work function , 1976 .
[81] C. B. Duke,et al. Contact electrification of polymers: A quantitative model , 1978 .
[82] Justin A. Gantt,et al. High-shear granulation modeling using a discrete element simulation approach , 2005 .
[83] Francis J. Doyle,et al. Solution technique for a multi-dimensional population balance model describing granulation processes , 2005 .
[84] Jennifer S. Curtis,et al. Discrete Element Method Simulations for Complex Granular Flows , 2015 .
[85] M. Capece,et al. Prediction of powder flow performance using a multi-component granular Bond number , 2015 .
[86] Troy Shinbrot,et al. Powder technology in the pharmaceutical industry: the need to catch up fast , 2002 .
[87] R. Ramprasad,et al. Effective work function of metals interfaced with dielectrics: A first-principles study of the Pt-HfO2interface , 2011 .
[88] D. Geldart. Types of gas fluidization , 1973 .
[89] Mojtaba Ghadiri,et al. Triboelectric charging of powders: A review , 2010 .
[90] Yoshitsugu Muguruma,et al. Numerical simulation of particulate flow with liquid bridge between / particles simulation of centrifugal tumbling granulator , 2000 .
[91] R. L. Braun,et al. Viscosity, granular‐temperature, and stress calculations for shearing assemblies of inelastic, frictional disks , 1986 .
[92] M. Mazumder,et al. Portable Free-Fall Electrostatic Separator for Beneficiation of Charged Particulate Materials , 2008 .
[93] C. Xu,et al. PREDICTION OF THE MINIMUM FLUIDIZATION VELOCITY FOR FINE PARTICLES OF VARIOUS DEGREES OF COHESIVENESS , 2008 .
[94] Colin Thornton,et al. Impact of elastic spheres with and without adhesion , 1991 .
[95] Jennifer S. Curtis,et al. A numerical study of granular shear flows of rod-like particles using the discrete element method , 2012, Journal of Fluid Mechanics.
[96] Bruno C. Hancock,et al. Process modeling in the pharmaceutical industry using the discrete element method. , 2009, Journal of pharmaceutical sciences.
[97] T. Reitberger,et al. Luminescence from γ- and β-irradiated HDPE and LLDPE , 1997 .
[98] Stefan Heinrich,et al. DEM–CFD modeling of a fluidized bed spray granulator , 2011 .
[99] G. Rowley,et al. Electrostatic characterisation of inhaled powders: effect of contact surface and relative humidity. , 2006, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.
[100] Alina A. Alexeenko,et al. Computational analysis of fluid dynamics in pharmaceutical freeze-drying. , 2009, Journal of pharmaceutical sciences.
[101] Doraiswami Ramkrishna,et al. Population Balances: Theory and Applications to Particulate Systems in Engineering , 2000 .
[102] Bruno C. Hancock,et al. Process simulation in the pharmaceutical industry: a review of some basic physical models. , 2006, Journal of pharmaceutical sciences.
[103] Heiko Briesen,et al. Numerical behavior of a multiscale aggregation model—coupling population balances and discrete element models , 2012 .
[104] A. Levine,et al. How Sandcastles Fall , 1998, cond-mat/9801204.
[105] R. D. Mindlin. Elastic Spheres in Contact Under Varying Oblique Forces , 1953 .
[106] Clive E Davies,et al. Avalanching flow of cohesive powders , 2006 .
[107] Patrice Creux,et al. Strong specific hydroxide ion binding at the pristine oil/water and air/water interfaces. , 2009, The journal of physical chemistry. B.
[108] Jennifer S. Curtis,et al. Segregation of cohesive granular materials during discharge from a rectangular hopper , 2010 .
[109] Scott M. Johnson,et al. Simulating the Effects of Interparticle Cohesion in Micron‐Scale Powders , 2009 .
[110] R. Dalby,et al. Predicting the Quality of Powders for Inhalation from Surface Energy and Area , 2002, Pharmaceutical Research.
[111] Charles C. Persinger,et al. How to improve R&D productivity: the pharmaceutical industry's grand challenge , 2010, Nature Reviews Drug Discovery.
[112] S. Naik,et al. Triboelectrification: A review of experimental and mechanistic modeling approaches with a special focus on pharmaceutical powders. , 2016, International journal of pharmaceutics.
[113] Koichi Iinoya,et al. The capillary binding force of a liquid bridge , 1974 .
[114] X. Chateau,et al. Rupture energy of a pendular liquid bridge , 2001 .
[115] Prabir K. Basu,et al. Improving Pharmaceutical Product Development and Manufacturing: Impact on Cost of Drug Development and Cost of Goods Sold of Pharmaceuticals , 2008, Journal of Pharmaceutical Innovation.
[116] Jürgen Tomas,et al. Adhesion of ultrafine particles—A micromechanical approach , 2007 .
[117] E. Lifshitz. The theory of molecular attractive forces between solids , 1956 .
[118] A. Marco Saitta,et al. Influence of a knot on the strength of a polymer strand , 1999, Nature.
[119] D. Maza,et al. Granular packings of elongated faceted particles deposited under gravity , 2010 .
[120] Otis R. Walton,et al. Review of Adhesion Fundamentals for Micron-Scale Particles , 2008 .
[121] P. Holm,et al. End-Point Detection in a Wet Granulation Process , 2001, Pharmaceutical development and technology.
[122] W. R. Harper. Contact and frictional electrification , 1967 .
[123] Nejat Rahmanian,et al. Characterisation of granule structure and strength made in a high shear granulator , 2009 .
[124] I-Feng W. Kuo,et al. An ab Initio Molecular Dynamics Study of the Aqueous Liquid-Vapor Interface , 2004, Science.
[125] Colin Hare,et al. Analysis of the dynamics of the FT4 powder rheometer , 2015 .
[126] C. Wassgren,et al. DEM-compartment-population balance model for particle coating in a horizontal rotating drum , 2015 .
[127] Brij M Moudgil,et al. Capillary forces between two spheres with a fixed volume liquid bridge: theory and experiment. , 2005, Langmuir : the ACS journal of surfaces and colloids.
[128] D. Wilcox. Turbulence modeling for CFD , 1993 .
[129] S. Naik,et al. Effects of particle size on the triboelectrification phenomenon in pharmaceutical excipients: Experiments and multi-scale modeling , 2016 .
[130] Work function changes induced by charged adsorbates: origin of the polarity asymmetry. , 2008, Physical review letters.
[131] Yuqing Feng,et al. Assessment of model formulations in the discrete particle simulation of gas-solid flow , 2004 .
[132] T. Shinbrot,et al. Use of a static eliminator to improve powder flow. , 2009, International journal of pharmaceutics.
[133] S. Choi,et al. Characterization of interparticle forces in the packing of cohesive fine particles. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.
[134] R. Tan,et al. Analysis of the influence of relative humidity on the moisture sorption of particles and the aerosolization process in a dry powder inhaler , 2008 .
[135] Brian H. Kaye,et al. Studying the avalanching behaviour of a powder in a rotating disc , 1995 .
[136] Dana Barrasso,et al. MULTI-SCALE MODELING OF WET GRANULATION PROCESSES , 2015 .
[137] A. Barabasi,et al. What keeps sandcastles standing? , 1997, Nature.
[138] A. Bard,et al. Electrostatic electrochemistry at insulators. , 2008, Nature materials.
[139] Gabriel I. Tardos,et al. Computer simulation of wet granulation , 2000 .
[140] J. Lowell. Surface states and the contact electrification of polymers , 1977 .
[141] Dana Barrasso,et al. A Multi-Scale Hybrid CFD-DEM-PBM Description of a Fluid-Bed Granulation Process , 2014 .
[142] W. K. Ng,et al. High speed imaging with electrostatic charge monitoring to track powder deagglomeration upon impact , 2013 .
[143] T. De Beer,et al. Mechanistic modelling of fluidized bed drying processes of wet porous granules: a review. , 2011, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.
[144] Boris V. Balakin,et al. Agglomeration of solid particles by liquid bridge flocculants: Pragmatic modelling , 2015 .
[145] Bruno C. Hancock,et al. A combined experimental and numerical approach to explore tribocharging of pharmaceutical excipients in a hopper chute assembly. , 2015, International journal of pharmaceutics.
[146] Brahmeshwar Mishra,et al. A review of computer simulation of tumbling mills by the discrete element method: Part I—contact mechanics , 2003 .
[147] G. Mason,et al. Liquid bridges between spheres , 1965 .
[148] Bodhisattwa Chaudhuri,et al. Experiments and numerical modeling to estimate the coating variability in a pan coater. , 2011, International journal of pharmaceutics.
[149] H Leuenberger,et al. Granulation, new techniques. , 1982, Pharmaceutica acta Helvetiae.
[150] Heinrich M. Jaeger,et al. FORCE DISTRIBUTION IN A GRANULAR MEDIUM , 1998 .
[151] Stefan Luding,et al. Shear flow modeling of cohesive and frictional fine powder , 2005 .
[152] J. Williams,et al. Discrete element simulation and the contact problem , 1999 .
[153] Robert Pfeffer,et al. The behavior of liquid bridges between two relatively moving particles , 1987 .
[154] Nora Anne Urbanetz,et al. The impact of electrostatic charge in pharmaceutical powders with specific focus on inhalation-powders , 2011 .
[155] H. Chan,et al. Effect of moisture on the electrostatic charge properties of metered dose inhaler aerosols , 2006 .
[156] R. A. Fisher. On the capillary forces in an ideal soil; correction of formulae given by W. B. Haines , 1926, The Journal of Agricultural Science.
[157] Karl-Ernst Wirth,et al. Electrostatically supported mixing of fine grained particles , 2005 .
[158] Fernando J Muzzio,et al. Hydrodynamics-induced variability in the USP apparatus II dissolution test. , 2005, International journal of pharmaceutics.
[159] M. Sommerfeld,et al. Multiphase Flows with Droplets and Particles , 2011 .
[160] T. Debies,et al. Investigation of the contact charging mechanism between an organic salt doped polymer surface and polymer-coated metal beads , 1995 .
[161] Colin Thornton,et al. Discrete particle simulation of agglomerate impact coalescence , 1998 .
[162] Anthony Wachs,et al. Grains3D, a flexible DEM approach for particles of arbitrary convex shape — Part I: Numerical model and validations , 2012 .
[163] John N. Staniforth,et al. Aerosol Electrostatics I: Properties of Fine Powders Before and After Aerosolization by Dry Powder Inhalers , 2004, Pharmaceutical Research.
[164] Runyu Yang,et al. Numerical study of the packing of wet coarse uniform spheres , 2003 .
[165] Mohammed Benali,et al. Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods , 2014 .
[166] M. Capece,et al. On the relationship of inter-particle cohesiveness and bulk powder behavior: Flowability of pharmaceutical powders. , 2016, International journal of pharmaceutics.
[167] Francis J. Doyle,et al. A mechanistic model for breakage in population balances of granulation: Theoretical kernel development and experimental validation , 2009 .
[168] Ian T. Cameron,et al. Process systems modelling and applications in granulation: A review , 2005 .
[169] Yanfeng Luo,et al. Dry coating, a novel coating technology for solid pharmaceutical dosage forms. , 2008, International journal of pharmaceutics.
[170] M. Sommerfeld,et al. Numerical calculation of electrostatic powder painting using the Euler/Lagrange approach , 2002 .
[171] Joseph J. McCarthy. Micro-modeling of cohesive mixing processes , 2003 .
[172] Ali Hassanpour,et al. Tribo-Electrification and Associated Segregation of Pharmaceutical Bulk Powders , 2011 .
[173] S. Apte. Excipient-API interactions in dry powder inhalers , 2012 .
[174] Philip Chi Lip Kwok,et al. Electrostatics in pharmaceutical solids , 2015 .
[175] A. Hickey,et al. Investigation of triboelectric charging in dry powder inhalers using electrical low pressure impactor (ELPI). , 2007, International journal of pharmaceutics.
[176] John Bridgwater,et al. The dynamics of granular materials – towards grasping the fundamentals , 2003 .
[177] V. Rudolph,et al. Interparticle van der Waals force in powder flowability and compactibility. , 2004, International journal of pharmaceutics.
[178] Adrian G. Bailey,et al. Charging of Solids and Powders , 1993 .
[179] A. W. Jenike. Gravity flow of bulk solids , 1961 .
[180] James D. Litster,et al. Population balance modelling of granulation with a physically based coalescence kernel , 2002 .
[181] H. Wu,et al. A mechanistic population balance model for granulation processes: Effect of process and formulation parameters , 2014 .
[182] J. Rantanen,et al. Static electrification of powders during spray drying , 2004 .
[183] R. Feynman. Forces in Molecules , 1939 .
[184] P. Kosinski,et al. Micromechanics of agglomeration forced by the capillary bridge: The restitution of momentum , 2013 .
[185] Amir R. Khoei,et al. Computational modeling of 3D powder compaction processes , 2007 .
[186] Jennifer S. Curtis,et al. Granular shear flows of flat disks and elongated rods without and with friction , 2013 .
[187] J. Engberts,et al. Physisorption of hydroxide ions from aqueous solution to a hydrophobic surface. , 2005, Journal of the American Chemical Society.
[188] Masayuki Horio,et al. Numerical simulation of cohesive powder behavior in a fluidized bed , 1998 .
[189] Satoru Watano,et al. Mechanism and control of electrification in pneumatic conveying of powders , 2006 .
[190] K. Kendall,et al. Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.
[191] M. Ghadiri,et al. Analysis of a Simple Test Device for Tribo‐Electric Charging of Bulk Powders , 2009 .
[192] A. Hickey,et al. Powder properties and their influence on dry powder inhaler delivery of an antitubercular drug , 2002, AAPS PharmSciTech.
[193] P. Young,et al. The influence of relative humidity on particulate interactions in carrier-based dry powder inhaler formulations. , 2002, International journal of pharmaceutics.
[194] Jam Hans Kuipers,et al. Integrated DEM–CFD modeling of the contact charging of pneumatically conveyed powders , 2014 .
[195] G. Klinzing. Clustering under the influence of electrostatic forces , 1986 .