Simple self-driven synchronous rectifier for resonant inductive coupling wireless power transfer

Resonant inductive coupling wireless power transfer (RIC-WPT) is attracting attention as a convenient power supply method to small mobile apparatus. The efficiency and the power transfer capability of RIC-WPT has been known to be profoundly dependent on the quality factor of the receiving resonator. However, the quality factor of the receiving resonator tends to be deteriorated because of the conduction loss at the diode rectifier, particularly for low output voltage applications. In order to improve the efficiency and the power transfer capability, this paper propose a novel simple synchronous rectifier, which can reduce the conduction loss. The proposed rectifier has simple circuit configuration, which contributes to straightforward application to the wireless power transfer to small mobile apparatus with limited installation space. Experiment was carried out to verify the operation principle of the proposed rectifier. As a result, the proposed rectifier revealed successful suppression of the conduction loss. In addition, the experimental wireless power transfer system verified successful improvement in the rectification efficiency, supporting usefulness of the proposed rectifier for practical applications of the RIC-WPT for small mobile apparatus.

[1]  Hao Jiang,et al.  A Low-Frequency Versatile Wireless Power Transfer Technology for Biomedical Implants , 2013, IEEE Transactions on Biomedical Circuits and Systems.

[2]  Takehiro Imura,et al.  Maximizing Air Gap and Efficiency of Magnetic Resonant Coupling for Wireless Power Transfer Using Equivalent Circuit and Neumann Formula , 2011, IEEE Transactions on Industrial Electronics.

[3]  Rui Zhang,et al.  Multiuser Wireless Power Transfer via Magnetic Resonant Coupling: Performance Analysis, Charging Control, and Power Region Characterization , 2015, IEEE Transactions on Signal and Information Processing over Networks.

[4]  G.-Y. Jeong High efficiency asymmetrical half-bridge converter using a self-driven synchronous rectifier , 2008 .

[5]  K. Murata,et al.  Self turn-on loss of MOSFET as synchronous rectifier in DC/DC buck converter - in case of a low driving impedance - , 2008, 2008 IEEE Power Electronics Specialists Conference.

[6]  J. W. Kolar,et al.  Optimized magnetic design for inductive power transfer coils , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[7]  Rahul Sarpeshkar,et al.  Feedback Analysis and Design of RF Power Links for Low-Power Bionic Systems , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[8]  Michal Frivaldsky,et al.  Full bridge converter with synchronous rectifiers for low output voltage application , 2011, 2011 International Conference on Applied Electronics.

[9]  Xuefei Xie,et al.  A novel high frequency current-driven synchronous rectifier for low voltage high current applications , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[10]  Jenshan Lin,et al.  Design and Test of a High-Power High-Efficiency Loosely Coupled Planar Wireless Power Transfer System , 2009, IEEE Transactions on Industrial Electronics.

[11]  Ikuo Awai Basic characteristics of "Magnetic resonance" wireless power transfer system excited by a 0 ohm power source , 2013, IEICE Electron. Express.

[12]  Bong-Hwan Kwon,et al.  A line-voltage-sensorless synchronous rectifier , 1999 .

[13]  Hao Liu,et al.  Modeling and Optimization of Class-E Amplifier at Subnominal Condition in a Wireless Power Transfer System for Biomedical Implants , 2017, IEEE Transactions on Biomedical Circuits and Systems.

[14]  Eiji Hiraki,et al.  Lagrangian derivation and analysis of a simple equivalent circuit model of wireless power transfer system with dual transmitting resonators , 2016, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe).

[15]  Minkyu Je,et al.  High-Efficiency Wireless Power Transfer for Biomedical Implants by Optimal Resonant Load Transformation , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[16]  Oscar Garcia,et al.  A new driving scheme for synchronous rectifiers: single winding self-driven synchronous rectification , 2001 .

[17]  Ron Shu-Yuen Hui,et al.  Using Self-Driven AC–DC Synchronous Rectifier as a Direct Replacement for Traditional Power Diode Rectifier , 2012, IEEE Transactions on Industrial Electronics.

[18]  Bo Zhang,et al.  Frequency Splitting Phenomena of Magnetic Resonant Coupling Wireless Power Transfer , 2014, IEEE Transactions on Magnetics.

[19]  E. Hiraki,et al.  Novel receiving coil structure for improving efficiency and power transfer capability of resonant inductive coupling wireless power transfer , 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

[20]  Jie Li,et al.  A Maximum Efficiency Point Tracking Control Scheme for Wireless Power Transfer Systems Using Magnetic Resonant Coupling , 2015, IEEE Transactions on Power Electronics.

[21]  P. D. Mitcheson,et al.  Maximizing DC-to-Load Efficiency for Inductive Power Transfer , 2013, IEEE Transactions on Power Electronics.

[22]  Ron Shu-Yuen Hui,et al.  Generalized Self-Driven AC–DC Synchronous Rectification Techniques for Single- and Multiphase Systems , 2011, IEEE Transactions on Industrial Electronics.

[23]  Gianluca Lazzi,et al.  On the Design of Efficient Multi-Coil Telemetry System for Biomedical Implants , 2013, IEEE Transactions on Biomedical Circuits and Systems.

[24]  Stepan Lucyszyn,et al.  Maximising DC to Load Efficiency for Inductive Power Transfer , 2012 .

[25]  Takehiro Imura,et al.  Coupling Coefficients Estimation of Wireless Power Transfer System via Magnetic Resonance Coupling Using Information From Either Side of the System , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[26]  Songcheol Hong,et al.  Wireless Power Transfer Resonance Coupling Amplification by Load-Modulation Switching Controller , 2015, IEEE Transactions on Industrial Electronics.