论文信息 - Micro-assembly using optically controlled bubbles - 字舞流文

Micro-assembly using optically controlled bubbles

An optically controlled bubble microrobot is presented here, and used to manipulate glass microbeads at up to 350 μm/s. The bubble microrobots were used to pull and push micro-objects into place, demonstrating micro-assembly.

Wenqi Hu | Aaron T. Ohta | Kelly S. Ishii

[1] Wenqi Hu,et al. Aqueous droplet manipulation by optically induced Marangoni circulation , 2011 .

[2] Russell M. Taylor,et al. Thermally actuated untethered impact-driven locomotive microdevices , 2006 .

[3] Sang Kug Chung,et al. 3-D manipulation of millimeter- and micro-sized objects using an acoustically excited oscillating bubble , 2009 .

[4] George J. Pappas,et al. Single Cell Manipulation using Ferromagnetic Composite Microtransporters , 2010 .

[5] B.R. Donald,et al. Planar Microassembly by Parallel Actuation of MEMS Microrobots , 2008, Journal of Microelectromechanical Systems.

[6] Max T. Hou,et al. Development of rolling magnetic microrobots , 2010 .

[7] Lixin Dong,et al. Artificial bacterial flagella: Fabrication and magnetic control , 2009 .

[8] Sang Kug Chung,et al. On-chip manipulation of objects using mobile oscillating bubbles , 2008 .

[9] Hsan-Yin Hsu,et al. Optically actuated thermocapillary movement of gas bubbles on an absorbing substrate. , 2007, Applied physics letters.

[10] Metin Sitti,et al. Modeling and Experimental Characterization of an Untethered Magnetic Micro-Robot , 2009, Int. J. Robotics Res..