Abstract—Standard routes for upgrading existing buildings to improve their seismic response can be expensive in terms of both time and cost due to the modifications required to the foundations. As a result, interest has grown in the installation of viscoelastic dampers (VEDs) in mid and high-rise buildings. Details of a low-cost viscoelastic passive control device, the rotary rubber braced damper (RRBD), are presented in this paper. This design has the added benefits of being lightweight and simple to install. Experimental methods and finite element modeling were used to assess the performance of the proposed VED design and its effect on building response during earthquakes. The analyses took into account the behaviors of non-linear materials and large deformations. The results indicate that the proposed RRBD provides high levels of energy absorption, ensuring the stable cyclical response of buildings in all scenarios considered. In addition, time history analysis was employed in this study to evaluate the RRBD’s ability to control the displacements and accelerations experienced by steel frame structures. It was demonstrated that the device responds well even at low displacements, highlighting its suitability for use in seismic events of varying severity.
[1]
T. T. Soong,et al.
Seismic Behavior and Design Guidelines for Steel Frame Structures with Added Viscoelastic Dampers
,
1993
.
[2]
J. Gough,et al.
High damping natural rubber seismic isolators
,
1997
.
[3]
Zainah Ibrahim,et al.
Modeling of a viscoelastic damper and its application in structural control
,
2017,
PloS one.
[4]
Bijan Samali,et al.
Use of viscoelastic dampers in reducing wind- and earthquake-induced motion of building structures
,
1995
.
[5]
C. J. Derham,et al.
Nonlinear natural rubber bearings for seismic isolation
,
1985
.
[6]
Marina Schroder,et al.
Structural Control Past Present And Future
,
2016
.