论文信息 - Radiative heat transfer in a solar air heater covered with a plastic film

Radiative heat transfer in a solar air heater covered with a plastic film

This article presents a new set of equations for the radiative balances of the absorber plate and the transparent cover of a solar air heater covered with a plastic film. Air flow is supposed to pass between the absorber plate and the bottom of the collector, while the transparent cover and the absorber plate are separated by an immobile air layer. This configuration is shown to be the best suited for a plastic covered solar air heater used in tropical countries, from a practical point of view.

Yézouma Coulibaly | Yves Jannot

[1] R. S. Claassen,et al. Introduction to solar materials science , 1993 .

[2] Y. Jannot,et al. Un procédé économique pour l'amélioration du confort thermique en zone tropicale séche: la ventilation forcée par de l'air extérieur éventuellement humidifiéAmelioration of thermal comfort in dry tropical climate by use of an economic process: direct evaporative cooling , 1994 .

[3] B. K. Bala,et al. Simulation of the indirect natural convection solar drying of rough rice , 1994 .

[4] W. Beckman,et al. Solar Engineering of Thermal Processes , 1985 .

[5] S. Das,et al. Performance of a solar collector with different glazing materials and their degradation under the condition prevailing in a solar collector , 1991 .

[6] H. P. Garg,et al. Design curves for conventional solar air heaters , 1995 .

[7] Donatien Njomo,et al. Techno-economic analysis of a plastic cover solar air heater , 1995 .

[8] D. Njomo. Modelling the heat exchanges in a solar air heater with a cover partially transparent to infrared radiation , 1991 .