Synthesis of dense WSi2 and WSi2-xvol.%SiC composites by high-frequency induction heated combustion and its mechanical properties

[1]  I. Shon,et al.  Comparison of sintering behavior and mechanical properties between WC−8Co and WC−8Ni hard materials produced by high-frequency induction heating sintering , 2006 .

[2]  J. Han,et al.  Low-temperature cyclic oxidation behavior of MoSi2/SiC nanocomposite coating formed on Mo substrate , 2004 .

[3]  I. Shon,et al.  Synthesis of WC and dense WC–5 vol.% Co hard materials by high-frequency induction heated combustion , 2004 .

[4]  I. Shon,et al.  Synthesis of WC and dense WC–xvol.%Co hard materials by high-frequency induction heated combustion method , 2004 .

[5]  W. Pan,et al.  Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS , 2004 .

[6]  K. J. Rao,et al.  Microwave sintering of MoSi2–SiC composites , 2003 .

[7]  Z. A. Munir,et al.  One-step synthesis of dense tungsten carbide-cobalt hard materials , 2002 .

[8]  Z. A. Munir,et al.  Synthesis of WSi2–ZrO2 and WSi2–Nb composites by field-activated combustion , 2001 .

[9]  Z. A. Munir,et al.  Dense WSi2 and WSi2–20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion , 2001 .

[10]  I. Shon,et al.  Simultaneous synthesis and densification of WSi2 and WSi2-20vol.%Nb composite by field-activated and pressure-assisted combustion , 2000 .

[11]  G. S. Upadhyaya,et al.  Synthesis and sintering of TiB2 and TiB2–TiC composite under high pressure , 2000 .

[12]  Zuhair A. Munir,et al.  Simultaneous synthesis and densification of Ti5Si3 and Ti5Si3–20 vol% ZrO2 composites by field-activated and pressure-assisted combustion , 1999 .

[13]  최상욱,et al.  고압 연소소결(HPCS)법을 이용한 Ti-C-Mo계 탄화물 복합체의 제조 , 1999 .

[14]  Kazuo Yamazaki,et al.  Simultaneous Synthesis and Densification of MoSi2 by Field‐Activated Combustion , 1996 .

[15]  Y. Mahajan,et al.  Reaction Hot Pressing and Characterization of MoSi2/SiCp Composites , 1995 .

[16]  R. Abbaschian,et al.  Toughening MoSi2 with niobium metal-effects of size and orientation of ductile laminae , 1994 .

[17]  M. Hoffmann,et al.  Mechanical properties of hot-pressed SiC-TiB2/TiC composites synthesizedin situ , 1993 .

[18]  M. Hoffmann,et al.  Sintering of in‐Situ Synthesized Sic–TiB2 Composites with Improved Fracture Toughness , 1992 .

[19]  Mattheiss.  Calculated structural properties of CrSi2, MoSi2, and WSi2. , 1992, Physical review. B, Condensed matter.

[20]  J. Petrovic,et al.  Hardness and Fracture Toughness of SiC‐Particle‐Reinforced MoSi2 Composites , 1991 .

[21]  A. Berndt.  Binary phase diagrams , 1969 .