A Review of Computational Fluid Dynamics Simulations on PEFC Performance.

Among the number of fuel cells in existence, the proton exchange fuel cell (PEFC) has been favoured because of its numerous applications. These applications range from small power generation in cell phones, to stationary power plants or vehicular applications. However, the principle of operation on PEFCs naturally leads to the development of water from the reaction between hydrogen and oxygen. Computational fluid dynamics (CFD) has played an important role in many research and development projects. From automotive to aerospace and even medicine, to the development of fuel cells, by making it possible to investigate different scenarios and fluid flow patterns for optimal performance. CFD allows for in-situ analysis of PEFCs, by studying fluid flow and heat and mass transfer phenomena, thus reducing the need for expensive prototypes and cutting down test-time by a substantial amount. This paper aims at investigating the advances made in the use of CFD as a technique for the performance and optimisation of PEFCs to identify the research and development opportunities in the field, such as the performance of a novel PEFC, with focus on the underlying physics and in-situ analysis of the operations.

[1]  Xuan Liu,et al.  Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells , 2007 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  Jack S. Brenizer,et al.  Quantification of liquid water accumulation and distribution in a polymer electrolyte fuel cell using neutron imaging , 2006 .

[4]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[5]  N. Djilali,et al.  Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers , 2006 .

[6]  Eric D. Larson,et al.  Methanol and hydrogen from biomass for transportation , 1995 .

[7]  Biao Zhou,et al.  A general model of proton exchange membrane fuel cell , 2008 .

[8]  C. Hirsch,et al.  Numerical Computation of Internal and External Flows. By C. HIRSCH. Wiley. Vol. 1, Fundamentals of Numerical Discretization. 1988. 515 pp. £60. Vol. 2, Computational Methods for Inviscid and Viscous Flows. 1990, 691 pp. £65. , 1991, Journal of Fluid Mechanics.

[9]  Rui Chen,et al.  A proposed agglomerate model for oxygen reduction in the catalyst layer of proton exchange membrane fuel cells , 2014 .

[10]  Song-Yul Choe,et al.  Modeling and simulation of a PEM fuel cell stack considering temperature effects , 2006 .

[11]  Young-Bae Kim,et al.  Channel geometry optimization of a polymer electrolyte membrane fuel cell using genetic algorithm , 2015 .

[12]  Ned Djilali,et al.  Three-dimensional computational analysis of transport phenomena in a PEM fuel cell—a parametric study , 2003 .

[13]  Oluwamayowa A. Obeisun,et al.  Effect of temperature uncertainty on polymer electrolyte fuel cell performance , 2014 .

[14]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[15]  Timothy G. Trucano,et al.  Validation Methodology in Computational Fluid Dynamics , 2000 .

[16]  T. Matikas,et al.  The Influence of Corrosion Damage on Low Cycle Fatigue Life ofReinforcing Steel Bars S400 , 2015 .

[17]  Soosan Rowshanzamir,et al.  Effects of operating parameters on performance of a proton exchange membrane fuel cell , 2006 .

[18]  David P. Wilkinson,et al.  High temperature PEM fuel cells , 2006 .

[19]  N. Hanspal,et al.  Three-dimensional CFD modelling of PEM fuel cells: an investigation into the effects of water flooding , 2009 .

[20]  Xianguo Li,et al.  Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding , 2000 .

[21]  Aimy Bazylak,et al.  Liquid water visualization in PEM fuel cells: A review , 2009 .

[22]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[23]  Yu Wei,et al.  Dependence of high-temperature PEM fuel cell performance on Nafion® content , 2006 .

[24]  H. Yapici,et al.  The Effect of Microporous Layer in Phosphoric Acid Doped Polybenzimidazole Polymer Electrolyte Membrane Fuel Cell , 2013 .

[25]  T. Nguyen,et al.  An experimental study of the liquid water saturation level in the cathode gas diffusion layer of a PEM fuel cell , 2012 .

[26]  P. M. Diéguez,et al.  CFD analysis of the effects of the flow distribution and heat losses on the steam reforming of methanol in catalytic (Pd/ZnO) microreactors , 2014 .

[27]  Xianguo Li,et al.  Analysis of liquid water transport in cathode catalyst layer of PEM fuel cells , 2010 .

[28]  Chao-Yang Wang,et al.  In situ water distribution measurements in a polymer electrolyte fuel cell , 2003 .

[29]  Gérard Gebel,et al.  Water profile determination in a running proton exchange membrane fuel cell using small-angle neutron scattering , 1996 .

[30]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[31]  Huei Peng,et al.  Water distribution measurement for a PEMFC through neutron radiography , 2007 .

[32]  Harvey G. Stenger,et al.  Computational fluid dynamics modeling of polymer electrolyte membrane fuel cells , 2005 .

[33]  Hisao Nishikawa,et al.  Measurements of humidity and current distribution in a PEFC , 2006 .

[34]  Hugh W. Coleman,et al.  VERIFICATION AND VALIDATION OF CFD SIMULATIONS , 1999 .

[35]  Stefano Cordiner,et al.  3D effects of water-saturation distribution on polymeric electrolyte fuel cell (PEFC) performance , 2011 .

[36]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[37]  Jiri Blazek,et al.  Computational Fluid Dynamics: Principles and Applications , 2001 .

[38]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[39]  Yair Ein-Eli,et al.  PEM FC with improved water management , 2006 .

[40]  K. M. Chittajallu,et al.  Optimization of the cathode geometry in polymer electrolyte membrane (PEM) fuel cells , 2004 .

[41]  Biao Zhou,et al.  Effects of electrode wettabilities on liquid water behaviours in PEM fuel cell cathode , 2008 .

[42]  C. Hochenauer,et al.  Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels , 2012 .

[43]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[44]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[45]  Norman Munroe,et al.  Review and comparison of approaches to proton exchange membrane fuel cell modeling , 2005 .

[46]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[47]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[48]  Jong-Won Lee,et al.  A review of gas diffusion layer in PEM fuel cells: Materials and designs , 2012 .

[49]  Ebrahim Afshari,et al.  Three-dimensional CFD modeling of a planar membrane humidifier for PEM fuel cell systems , 2014 .

[50]  D. Wilkinson,et al.  A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells , 2010 .

[51]  T. Springer,et al.  Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells , 1993 .

[52]  Alexander Wokaun,et al.  In situ diagnostic of two-phase flow phenomena in polymer electrolyte fuel cells by neutron imaging Part B. Material variations , 2006 .

[53]  Ibrahim Dincer,et al.  Sustainability aspects of hydrogen and fuel cell systems , 2011 .

[54]  A. Kannan,et al.  Convergence criteria establishment for 3D simulation of proton exchange membrane fuel cell , 2012 .

[55]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[56]  Mehrzad Shams,et al.  Model development and optimization of operating conditions to maximize PEMFC performance by response surface methodology , 2015 .

[57]  John B. Young.  Thermofluid Modeling of Fuel Cells , 2007 .

[58]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[59]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[60]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .

[61]  Massimo Santarelli,et al.  Experimental analysis of the effects of the operating variables on the performance of a single PEMFC , 2007 .

[62]  Haibo Zhai,et al.  Comparing real-world fuel consumption for diesel- and hydrogen-fueled transit buses and implication for emissions , 2007 .

[63]  Ned Djilali,et al.  CFD-based modelling of proton exchange membrane fuel cells , 2005 .

[64]  L. Carrette,et al.  Fuel cells: principles, types, fuels, and applications. , 2000, Chemphyschem : a European journal of chemical physics and physical chemistry.

[65]  V. Dharma Rao,et al.  Parametric sensitivity analysis of PEM fuel cell electrochemical Model , 2011 .

[66]  Chunshan Song,et al.  Fuel processing for low-temperature and high-temperature fuel cells , 2002 .

[67]  T. Nguyen,et al.  Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells , 1998 .

[68]  Zidong Wei,et al.  A Review of Water Management in Polymer Electrolyte Membrane Fuel Cells , 2009 .

[69]  Wei Yuan,et al.  Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance , 2010 .

[70]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[71]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[72]  Andrei Kulikovsky,et al.  Fuel cell basics , 2019, Analytical Modeling of Fuel Cells.

[73]  Huei Peng,et al.  A segmented model for studying water transport in a PEMFC , 2008 .

[74]  Hubert A. Gasteiger,et al.  Dependence of PEM fuel cell performance on catalyst loading , 2004 .

[75]  S. Hirai,et al.  Effect of liquid water distribution in gas diffusion media with and without microporous layer on PEM fuel cell performance , 2013 .

[76]  Peiwen Li,et al.  Numerical investigation of the performance of symmetric flow distributors as flow channels for PEM fuel cells , 2012 .

[77]  Ned Djilali,et al.  Computational modelling of polymer electrolyte membrane (PEM) fuel cells: Challenges and opportunities , 2007 .