论文信息 - Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part I. Correlation of processing parameters for optimizing the process

Pultruded fiber reinforced thermoplastic poly(methyl methacrylate) composites. Part I. Correlation of processing parameters for optimizing the process

The effect of processing parameters on the properties (tensile, flexural strength and modulus and impact strength, etc.) of pultruded fiber reinforced poly(methyl methacrylate) (PMMA) composites has been studied. The processing parameters investigated included pulling rate, die temperature, and postcure. Wetting of fibers by PMMA resin was complete, and the fiber bundles were evenly distributed in the PMMA matrix. The conversion, molecular weight and viscosity of MMA prepolymer were studied by 1H-NMR, GPC and Brookfield viscometer. The optimum die temperature was determined from DSC diagram, molecular weight measurement and from the polymerization rate. The mechanical properties increased with the increasing postcure temperature and decreasing pulling rate and die temperature.

C. Ma | Chin-Hsing Chen

[1] H. B. Chin,et al. Development of a mathematical model for the pultrusion of unsaturated polyester resin , 1988 .

[2] C. Han,et al. The effect of resin chemistry on the curing behavior and chemorheology of unsaturated polyester resins , 1987 .

[3] S. J. Harris,et al. Failure of high voltage electrical insulators with pultruded glass fibre-reinforced plastic cores , 1986 .

[4] H. B. Chin,et al. Development of a mathematical model for the pultrusion process , 1986 .

[5] D. T. Turner,et al. Autoacceleration of Free-Radical Polymerization. 2. Methyl Methacrylate , 1977 .

[6] D. T. Turner. Autoacceleration of Free-Radical Polymerization. 1. The Critical Concentration , 1977 .

[7] A. Hamielec,et al. Bulk polymerization of methyl methacrylate , 1973 .