Predicting Rotation in Fenestrated Endovascular Aneurysm Repair Using Finite Element Analysis.

Fenestrated endovascular aneurysm repair (FEVAR) is a minimally invasive method of abdominal aortic aneurysm (AAA) repair utilized in patients with complex vessel anatomies. Stent grafts (SG) used in this process contain fenestrations within the device that need to be aligned with the visceral arteries upon successful SG deployment. Proper alignment is crucial to maintain blood flow to these arteries and avoid surgical complications. During fenestrated SG deployment, rotation of the SG can occur during the unsheathing process. This leads to misalignment of the vessels, and the fenestrations and is associated with poor clinical outcomes. The aim of this study was to develop a computational model of the FEVAR process to predict SG rotation. Six patient-specific cases are presented and compared with surgical case data. Realistic material properties, frictional effects, deployment methods, and boundary conditions are included in the model. A mean simulation error of 2 deg (range 1-4 deg) was observed. This model was then used to conduct a parameter study of frictional properties to see if rotation could be minimized. This study showed that increasing or decreasing the coefficients of friction (COF) between the sheath and the vessel walls would decrease the amount of rotation observed. Our model accurately predicts the amount of SG rotation observed during FEVAR and can be used as a preoperative planning tool within the surgical workflow.

[1]  David H. Frakes,et al.  Flow diverter effect on cerebral aneurysm hemodynamics: an in vitro comparison of telescoping stents and the Pipeline , 2013, Neuroradiology.

[2]  T. Corbett,et al.  Determination of coefficient of friction for self-expanding stent-grafts. , 2010, Journal of biomechanical engineering.

[3]  D A Vorp,et al.  Mechanical properties and microstructure of intraluminal thrombus from abdominal aortic aneurysm. , 2001, Journal of biomechanical engineering.

[4]  Gerhard A Holzapfel,et al.  Passive biaxial mechanical response of aged human iliac arteries. , 2003, Journal of biomechanical engineering.

[5]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[6]  Pierre Badel,et al.  Patient-specific simulation of endovascular repair surgery with tortuous aneurysms requiring flexible stent-grafts. , 2016, Journal of the mechanical behavior of biomedical materials.

[7]  Gilles Soulez,et al.  Experimental validation of more realistic computer models for stent‐graft repair of abdominal aortic aneurysms, including pre‐load assessment , 2016, International journal for numerical methods in biomedical engineering.

[8]  Frans N van de Vosse,et al.  Effects of wall calcifications in patient-specific wall stress analyses of abdominal aortic aneurysms. , 2007, Journal of biomechanical engineering.

[9]  Michael S Sacks,et al.  A planar biaxial constitutive relation for the luminal layer of intra-luminal thrombus in abdominal aortic aneurysms. , 2006, Journal of biomechanics.

[10]  Gilles Soulez,et al.  Finite element analysis of abdominal aortic aneurysms: geometrical and structural reconstruction with application of an anisotropic material model , 2014 .

[11]  A. Kamenskiy,et al.  Biaxial mechanical properties of the human thoracic and abdominal aorta, common carotid, subclavian, renal and common iliac arteries , 2014, Biomechanics and modeling in mechanobiology.

[12]  Alberto Redaelli,et al.  Impact of different aortic valve calcification patterns on the outcome of transcatheter aortic valve implantation: A finite element study , 2016, Journal of biomechanics.

[13]  P Segers,et al.  Virtual evaluation of stent graft deployment: a validated modeling and simulation study. , 2012, Journal of the mechanical behavior of biomedical materials.

[14]  Shijia Zhao,et al.  Performance of self-expanding nitinol stent in a curved artery: impact of stent length and deployment orientation. , 2012, Journal of biomechanical engineering.

[15]  Pierre Badel,et al.  Patient-specific numerical simulation of stent-graft deployment: Validation on three clinical cases. , 2015, Journal of biomechanics.

[16]  C. Amon,et al.  Prediction of advanced endovascular stent graft rotation and its associated morbidity and mortality , 2018, Journal of vascular surgery.

[17]  W A Wall,et al.  Impact of calcifications on patient-specific wall stress analysis of abdominal aortic aneurysms , 2010, Biomechanics and modeling in mechanobiology.

[18]  D. Vorp,et al.  The effects of aneurysm on the biaxial mechanical behavior of human abdominal aorta. , 2006, Journal of biomechanics.

[19]  David H Frakes,et al.  Finite element modeling of embolic coil deployment: multifactor characterization of treatment effects on cerebral aneurysm hemodynamics. , 2013, Journal of biomechanics.

[20]  Isabelle Van Herzeele,et al.  Patient-specific Rehearsal Before EVAR: Influence on Technical and Nontechnical Operative Performance. A Randomized Controlled Trial , 2016, Annals of surgery.

[21]  Jianping Xiang,et al.  High-fidelity virtual stenting: modeling of flow diverter deployment for hemodynamic characterization of complex intracranial aneurysms. , 2015, Journal of neurosurgery.

[22]  Pierre Badel,et al.  Finite Element Analysis of the Mechanical Performances of 8 Marketed Aortic Stent-Grafts , 2013, Journal of endovascular therapy : an official journal of the International Society of Endovascular Specialists.

[23]  C. Amon,et al.  Computational fluid dynamics evaluation of the cross-limb stent graft configuration for endovascular aneurysm repair. , 2012, Journal of biomechanical engineering.

[24]  C. Amon,et al.  Analysis of Iliac Artery Geometric Properties in Fenestrated Aortic Stent Graft Rotation , 2018, Vascular and endovascular surgery.

[25]  Robert J. Hinchliffe,et al.  Pathophysiology and epidemiology of abdominal aortic aneurysms , 2011, Nature Reviews Cardiology.

[26]  T. M. Silver,et al.  Actuarial analysis of variables associated with rupture of small abdominal aortic aneurysms. , 1985, Surgery.

[27]  Ryan M. Sanford.  Computational Simulations of Fenestrated Endovascular Aneurysm Repair , 2017 .

[28]  H. Kuivaniemi,et al.  Aortic Aneurysms: An Immune Disease With a Strong Genetic Component , 2008, Circulation.

[29]  C. Kleinstreuer,et al.  Fluid-structure interaction effects on sac-blood pressure and wall stress in a stented aneurysm. , 2005, Journal of biomechanical engineering.