Comprehensive numerical model for the analysis of potential heat recovery solutions in a ceramic industry

[1]  H. Jouhara,et al.  Development and validation of a TRNSYS type to simulate heat pipe heat exchangers in transient applications of waste heat recovery , 2021, International Journal of Thermofluids.

[2]  H. I. Sewell,et al.  An experimental study and computational validation of waste heat recovery from a lab scale ceramic kiln using a vertical multi-pass heat pipe heat exchanger , 2020 .

[3]  H. Jouhara,et al.  Energy efficiency in the industrial sector in the EU, Slovenia, and Spain , 2020, Energy.

[4]  H. Jouhara,et al.  ETEKINA: Analysis of the potential for waste heat recovery in three sectors: Aluminium low pressure die casting, steel sector and ceramic tiles manufacturing sector , 2020, International Journal of Thermofluids.

[5]  L. Montorsi,et al.  Experimental and numerical analysis of a liquid aluminium injector for an Al-H2O based hydrogen production system , 2020, International Journal of Thermofluids.

[6]  H. Jouhara,et al.  The aluminium industry: A review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery , 2020 .

[7]  Aleksandra Kiedrzyńska,et al.  Application of the CFD simulation to the evaluation of natural gas replacement by syngas in burners of the ceramic sector , 2019, Energy.

[8]  Massimo Milani,et al.  A numerical approach for the combined analysis of the dynamic thermal behaviour of an entire ceramic roller kiln and the stress formation in the tiles , 2019, Energy.

[9]  H. Jouhara,et al.  Energy efficiency in industry: EU and national policies in Italy and the UK , 2019, Energy.

[10]  H. Jouhara,et al.  Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry , 2018, Energy.

[11]  S. Tassou,et al.  Waste heat recovery technologies and applications , 2018, Thermal Science and Engineering Progress.

[12]  Arash Karimipour,et al.  Present a multi-criteria modeling and optimization (energy, economic and environmental) approach of industrial combined cooling heating and power (CCHP) generation systems using the genetic algorithm, case study: A tile factory , 2018 .

[13]  Massimo Milani,et al.  Numerical analysis of the heat recovery efficiency for the post-combustion flue gas treatment in a coffee roaster plant , 2017 .

[14]  Massimo Milani,et al.  Numerical analysis of an entire ceramic kiln under actual operating conditions for the energy efficiency improvement. , 2017, Journal of environmental management.

[15]  M. Ramadan,et al.  New hybrid system combining TEG, condenser hot air and exhaust airflow of all-air HVAC systems , 2017 .

[16]  A. Z. S. Chong,et al.  Experimental and numerical investigation of a cross flow air-to-water heat pipe-based heat exchanger used in waste heat recovery , 2016 .

[17]  B. Sturm,et al.  Simulation of the convective drying process with automatic control of surface temperature , 2016 .

[18]  Joaquín Navarro-Esbrí,et al.  Experimental study of an ORC (organic Rankine cycle) for low grade waste heat recovery in a ceramic industry , 2015 .

[19]  Hussam Jouhara,et al.  Experimental and numerical investigation of an air-to-water heat pipe-based heat exchanger , 2015 .

[20]  A. Mezquita,et al.  Energy saving in ceramic tile kilns: Cooling gas heat recovery , 2014 .

[21]  Jane E. Sargison,et al.  Modelling and simulation of Paddy Grain (Rice) drying in a simple pneumatic dryer , 2007 .

[22]  Theocharis Tsoutsos,et al.  Energy saving technologies in the European ceramic sector: a systematic review , 2001 .

[23]  Jing Wu,et al.  Numerical evaluation on energy saving potential of a solar photovoltaic thermoelectric radiant wall system in cooling dominant climates , 2018 .