A 5-GHz Class-E3F2 power amplifier with 51% PAE and 21-dBm output power on 65nm CMOS

The design and simulation of a Class-E3F2 power amplifier using 65nm CMOS technology are detailed in this paper. The Class-EF amplifier combines aspects of the Class-E and -F load networks such as the harmonic terminations from the Class F and the use of a shunt capacitance at the drain in the Class E. A mixed-voltage cascode topology is used for the output stage to enable the use of fast low-voltage transistors with a higher supply voltage. To satisfy the Class-EF conditions the load network is designed to provide a short and open circuit to the second and third harmonic signals, respectively. The driver stage utilizes an Inverse Class-B topology to deliver a half-wave rectified sine to the output stage. The simulated amplifier achieved a power-added efficiency of 51% and a gain of 26 dB at an output power of 21 dBm. The second and third harmonic components were attenuated to −47.6 dBc and −79.3 dBc, respectively.

[1]  Vincent Fusco,et al.  High-Efficiency Harmonic-Peaking Class-EF Power Amplifiers With Enhanced Maximum Operating Frequency , 2015, IEEE Transactions on Microwave Theory and Techniques.

[2]  Domine M. W. Leenaerts,et al.  A 2.4-GHz 0.18-/spl mu/m CMOS self-biased cascode power amplifier , 2003 .

[3]  Vincent F. Fusco,et al.  Power-Combining Class-E Amplifier With Finite Choke , 2011, IEEE Transactions on Circuits and Systems I: Regular Papers.

[4]  Andrei Grebennikov,et al.  Switchmode RF and Microwave Power Amplifiers , 2021 .

[5]  K. Yoshida,et al.  A 5-GHz fully integrated CMOS class-E power amplifier using self-biasing technique with cascaded class-D drivers , 2012, 2012 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT).

[6]  Harish Krishnaswamy,et al.  An improved analysis and design methodology for RF Class-E power amplifiers with finite DC-feed inductance and switch On-resistance , 2012, 2012 IEEE International Symposium on Circuits and Systems.

[7]  C. Weitzel,et al.  RF power amplifiers for wireless communications , 2002, 24th Annual Technical Digest Gallium Arsenide Integrated Circuit (GaAs IC) Symposiu.

[8]  Vincent F. Fusco,et al.  Analysis and Design of Class-E 3 F and Transmission-Line Class-E 3 F 2 Power Amplifiers , 2011, IEEE Trans. Circuits Syst. I Regul. Pap..

[9]  Vincent F. Fusco,et al.  Transmission-Line Class-E Power Amplifier With Extended Maximum Operating Frequency , 2011, IEEE Transactions on Circuits and Systems II: Express Briefs.

[10]  Eric Kerherve,et al.  Design and measurement of a 2.5 GHz switched-mode CMOS power amplifier with reliability enhancement , 2016, 2016 IEEE MTT-S International Wireless Symposium (IWS).

[11]  Sergio Bampi,et al.  CMOS RF class-E power amplifier with power control , 2016, 2016 IEEE 7th Latin American Symposium on Circuits & Systems (LASCAS).