Oxygen and oil barrier properties of microfibrillated cellulose films and coatings

The preparation of carboxymethylated microfibrillated cellulose (MFC) films by dispersion-casting from aqueous dispersions and by surface coating on base papers is described. The oxygen permeability of MFC films were studied at different relative humidity (RH). At low RH (0%), the MFC films showed very low oxygen permeability as compared with films prepared from plasticized starch, whey protein and arabinoxylan and values in the same range as that of conventional synthetic films, e.g., ethylene vinyl alcohol. At higher RH’s, the oxygen permeability increased exponentially, presumably due to the plasticizing and swelling of the carboxymethylated nanofibers by water molecules. The effect of moisture on the barrier and mechanical properties of the films was further studied using water vapor sorption isotherms and by humidity scans in dynamic mechanical analysis. The influences of the degree of nanofibrillation/dispersion on the microstructure and optical properties of the films were evaluated by field-emission scanning electron microscopy (FE-SEM) and light transmittance measurements, respectively. FE-SEM micrographs showed that the MFC films consisted of randomly assembled nanofibers with a thickness of 5–10 nm, although some larger aggregates were also formed. The use of MFC as surface coating on various base papers considerably reduced the air permeability. Environmental scanning electron microscopy (E-SEM) micrographs indicated that the MFC layer reduced sheet porosity, i.e., the dense structure formed by the nanofibers resulted in superior oil barrier properties.

[1]  Henrik Kjellgren,et al.  Barrier and Surface Properties of Chitosan-Coated Greaseproof Paper , 2006 .

[2]  D. Fengel.  Ideas on the ultrastructural organization of the cell wall components , 1971 .

[3]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[4]  I. Arvanitoyannis,et al.  Edible films made from sodium casemate, starches, sugars or glycerol. Part 1 , 1996 .

[5]  J. Hamilton,et al.  Microfibrillated cellulose: morphology and accessibility , 1983 .

[6]  O. Ikkala,et al.  Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. , 2007, Biomacromolecules.

[7]  William J. Orts,et al.  Enhanced Ordering of Liquid Crystalline Suspensions of Cellulose Microfibrils: A Small Angle Neutron Scattering Study , 1998 .

[8]  Henrik Kjellgren,et al.  Influence of base paper on the barrier properties of chitosan-coated papers , 2006 .

[9]  T. Lindström,et al.  Polyelectrolytes adsorbed on the surface of cellulosic materials , 1986 .

[10]  Y. Ujihira,et al.  Correlation Study between Oxygen Permeability and Free Volume of Ethylene-Vinyl Alcohol Copolymer through Positronium Lifetime Measurement , 2001 .

[11]  K. Kendall.  Molecular Adhesion and Its Applications: The Sticky Universe , 2001 .

[12]  K. Newton,et al.  The effect of film permeability on the storage life and microbiology of vacuum-packed meat. , 1979, The Journal of applied bacteriology.

[13]  Magnus Norgren,et al.  The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[14]  F. S. Moolman,et al.  Improved oxygen barrier performance of poly(vinyl alcohol) films through hydrogen bond complex with poly(methyl vinyl ether-co-maleic acid) , 2008 .

[15]  E Deisenroth,et al.  The designing of a new grease repellent fluorochemical for the paper industry , 1997 .

[16]  Akira Isogai,et al.  Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. , 2009, Biomacromolecules.

[17]  Nathalie Gontard,et al.  Influence of Relative Humidity and Film Composition on Oxygen and Carbon Dioxide Permeabilities of Edible Films , 1996 .

[18]  K. R. Sandberg,et al.  Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential , 1983 .

[19]  T. Kawamoto,et al.  1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity , 1998 .

[20]  Paul Gatenholm,et al.  Material properties of plasticized hardwood xylans for potential application as oxygen barrier films. , 2004, Biomacromolecules.

[21]  J. Krochta,et al.  Plasticizer effect on oxygen permeability of β-lactoglobulin films. , 2000 .

[22]  K. S. Miller,et al.  Oxygen and aroma barrier properties of edible films: A review , 1997 .

[23]  I. Arvanitoyannis,et al.  Edible films made from hydroxypropyl starch and gelatin and plasticized by polyols and water , 1998 .

[24]  R. Kohler,et al.  A New Kinetic Model for Water Sorption Isotherms of Cellulosic Materials , 2006 .

[25]  Hiroyuki Yano,et al.  Optically Transparent Composites Reinforced with Networks of Bacterial Nanofibers , 2005 .

[26]  Kristin Syverud,et al.  Strength and barrier properties of MFC films , 2009 .

[27]  A. Dufresne,et al.  Shear-Induced Orientation Phenomena in Suspensions of Cellulose Microcrystals, Revealed by Small Angle X-ray Scattering , 1999 .

[28]  M. Bercea,et al.  Shear dynamics of aqueous suspensions of cellulose whiskers , 2000 .

[29]  A. Albertsson,et al.  Surface- and bulk-modified galactoglucomannan hemicellulose films and film laminates for versatile oxygen barriers. , 2006, Biomacromolecules.

[30]  P. Gatenholm,et al.  Material properties of films from enzymatically tailored arabinoxylans. , 2008, Biomacromolecules.

[31]  T. Lindström,et al.  On the charge stoichiometry upon adsorption of a cationic polyelectrolyte on cellulosic materials , 1987 .

[32]  I. Arvanitoyannis,et al.  Edible films made from gelatin, soluble starch and polyols, Part 3 , 1997 .

[33]  S. D. Jenkins,et al.  Permeability of N2, Ar, He, O2 and CO2 through biaxially oriented polyester films - dependence on free volume , 2001 .

[34]  Tara H. McHugh,et al.  Sorbitol- vs Glycerol-Plasticized Whey Protein Edible Films: Integrated Oxygen Permeability and Tensile Property Evaluation , 1994 .

[35]  J. Lange,et al.  Recent innovations in barrier technologies for plastic packaging—a review , 2003 .

[36]  J. Pomposo,et al.  On the glass transition behavior, interaction energies, and hydrogen-bonding strengths of binary poly(p-vinylphenol)/polyether blends , 1994 .

[37]  Michael Krisch,et al.  Anisotropic Elastic Properties of Cellulose Measured Using Inelastic X-ray Scattering , 2008 .

[38]  Henrik Kjellgren,et al.  Paper and paper coating performance chemicals , 2006 .

[39]  I. Arvanitoyannis,et al.  Edible films made from natural resources ; microcrystalline cellulose (MCC), methylcellulose (MC) and corn starch and polyols - Part 2 , 1996 .

[40]  A. Albertsson,et al.  Oxygen barrier materials from renewable sources: Material properties of softwood hemicellulose‐based films , 2006 .

[41]  F. E. Karasz,et al.  Compatibility of Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)/Poly(styrene-co-4-chlorostyrene) Blends. 1. Differential Scanning Calorimetry and Density Studies , 1978 .

[42]  P. Gatenholm,et al.  Structure, mechanical and barrier properties of amylose and amylopectin films , 1998 .

[43]  J. M. Bunn,et al.  Mechanical and barrier properties of edible chitosan films as affected by composition and storage , 1996 .

[44]  Peter Josefsson,et al.  Nanoscale cellulose films with different crystallinities and mesostructures--their surface properties and interaction with water. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[45]  Quan Yuan,et al.  Gas permeability of a novel cellulose membrane , 2002 .

[46]  P. Dole,et al.  Gas transport properties of starch based films , 2004 .

[47]  Marielle Henriksson,et al.  Cellulose nanopaper structures of high toughness. , 2008, Biomacromolecules.

[48]  G. Daniel,et al.  Ultrastructure of the cell wall of unbeaten Norway spruce pulp fibre surfaces , 2004 .

[49]  L. Berglund,et al.  Biomimetic polysaccharide nanocomposites of high cellulose content and high toughness. , 2007, Biomacromolecules.

[50]  Charles Q. Yang,et al.  Molecular modeling of cellulose in amorphous state part II: effects of rigid and flexible crosslinks on cellulose , 2004 .

[51]  Nathalie Gontard,et al.  Edible Wheat Gluten Films: Influence of the Main Process Variables on Film Properties using Response Surface Methodology , 1992 .

[52]  D. Plackett,et al.  Sustainable films and coatings from hemicelluloses: a review. , 2008, Biomacromolecules.