Determination of Mild Steel Corrosion Rate under Turbulent Flow in Highly Acidic Solution

[1]  H. Ashassi-Sorkhabi,et al.  Effect of hydrodynamic conditions on the inhibition performance of l-methionine as a “green” inhibitor , 2008 .

[2]  M. Metikoš-huković,et al.  The inhibition of copper–nickel alloy corrosion under controlled hydrodynamic condition in seawater , 2006 .

[3]  A. Popova,et al.  Evaluation of impedance measurements on mild steel corrosion in acid media in the presence of heterocyclic compounds , 2006 .

[4]  A. D. Davydov,et al.  Electrochemical behavior of stainless steel in aerated NaCl solutions by electrochemical impedance and rotating disk electrode methods , 2006 .

[5]  F. Walsh,et al.  The corrosion of nickel–aluminium bronze in seawater , 2005 .

[6]  D. Pletcher,et al.  The electrochemistry of 13% chromium stainless steel in oilfield brines , 2005 .

[7]  B. Tribollet,et al.  Influence of flow on the corrosion inhibition of carbon steel by fatty amines in association with phosphonocarboxylic acid salts , 2005 .

[8]  B. D. Barker,et al.  Flow influenced electrochemical corrosion of nickel aluminium bronze – Part I. Cathodic polarisation , 2004 .

[9]  Francesca Guidi,et al.  Tryptamine as a green iron corrosion inhibitor in 0.5 M deaerated sulphuric acid , 2004 .

[10]  S. Agostinho,et al.  Use of a rotating cylinder electrode in corrosion studies of a 90/10 Cu–Ni alloy in 0.5 mol L−1 H2SO4 media , 2000 .

[11]  P. Roberge,et al.  Behavior of the corrosion potential and corrosion current of Cu-Ni alloys under erosion corrosion conditions. Effect of oxygen , 1988 .

[12]  D. Gabe.  The rotating cylinder electrode , 1974 .