On weakest link theory and Weibull statistics

This communication addresses some common misconceptions about weakest link theory and Weibull statistics as they pertain to strength distributions of brittle fibers. After describing the nature of the problem, the flaws in ensuing proposed models of strength distributions are highlighted and discussed. A way forward that obviates the problems is suggested.

[1]  F. Wang,et al.  Modified Weibull Distribution for Analyzing the Tensile Strength of Bamboo Fibers , 2014 .

[2]  J. Gérard,et al.  Role of silane coupling agent and polymeric film former for tailoring glass fiber sizings from tensile strength measurements , 2001 .

[3]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[4]  J. Thomason.  On the application of Weibull analysis to experimentally determined single fibre strength distributions , 2013 .

[5]  E. Bourgain,et al.  Some guidelines for a consistent use of the Weibull statistics with ceramic fibres , 1992 .

[6]  Richard L. Smith,et al.  An examination of statistical theories for fibrous materials in the light of experimental data , 1985 .

[7]  T. Ogasawara,et al.  Potential strength of Nicalon™, Hi Nicalon™, and Hi Nicalon Type S™ monofilaments of variable diameters , 2006 .

[8]  W. Blumenthal,et al.  Analysis of size dependence of ceramic fiber and whisker strength , 2005 .

[9]  Jenn‐Ming Yang,et al.  The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers , 2011, Journal of Materials Science.

[10]  Masaki Hojo,et al.  Glass fibre strength distribution determined by common experimental methods , 2002 .

[11]  G. J. DeSalvo.  THEORY AND STRUCTURAL DESIGN APPLICATIONS OF WEIBULL STATISTICS. , 1970 .

[12]  C. Beetz.  The analysis of carbon fibre strength distributions exhibiting multiple modes of failure , 1982 .

[13]  F. Wang,et al.  Effect of the Statistical Nature of Fiber Strength on the Predictability of Tensile Properties of Polymer Composites Reinforced with Bamboo Fibers: Comparison of Linear- and Power-Law Weibull Models , 2016, Polymers.

[14]  D. M. Wilson,et al.  Statistical tensile strength of NextelTM 610 and NextelTM 720 fibres , 1997 .

[15]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[16]  S. D. Durham,et al.  Weibull Analysis of the Strength of Carbon Fibers Using Linear and Power Law Models for the Length Effect , 1995 .

[17]  D. Wilson,et al.  High performance oxide fibers for metal and ceramic composites , 2001 .

[18]  J. Quinn,et al.  A practical and systematic review of Weibull statistics for reporting strengths of dental materials. , 2010, Dental materials : official publication of the Academy of Dental Materials.

[19]  K. Phani,et al.  Gauge Length Effect on the Strength of Silicon Carbide and Sapphire Filaments , 1990 .

[20]  Jinyuan Zhou,et al.  A modified Weibull model for tensile strength distribution of carbon nanotube fibers with strain rate and size effects , 2012 .

[21]  R. Postle,et al.  Weibull analysis of the tensile behavior of fibers with geometrical irregularities , 2002 .

[22]  J. Gérard,et al.  Extrapolation techniques at short gauge lengths based on the weakest link concept for fibres exhibiting multiple failure modes , 1999 .