In-situ search for the origin of seismic repeaters in a deep mine, using geological and geomechanical measurements

[1]  B. Laenen,et al.  First insights to the seismic response of the fractured Carboniferous limestone reservoir at the Balmatt geothermal doublet (Belgium) , 2023, Geothermics.

[2]  C. Wanhainen,et al.  Ore mineralogy and trace element (re)distribution at the metamorphosed Lappberget Zn-Pb-Ag-(Cu-Au) deposit, Garpenberg, Sweden , 2021 .

[3]  L. Brown.  Quantifying discrete seismic responses to mining , 2020 .

[4]  P. Bernard,et al.  Seismic repeaters linked to weak rock-mass creep in deep excavation mining , 2020 .

[5]  D. Faulkner,et al.  Low Friction Coefficient of Phyllosilicate Fault Gouges and the Effect of Humidity: Insights From a New Microphysical Model , 2020, Journal of Geophysical Research: Solid Earth.

[6]  V. Renaud,et al.  In situ monitoring and 3D geomechanical numerical modelling to evaluate seismic and aseismic rock deformation in response to deep mining , 2020 .

[7]  A. Pinar,et al.  Repeating earthquakes and interplate coupling along the western part of the North Anatolian Fault , 2019, Tectonophysics.

[8]  M. Nakatani,et al.  Emergence and disappearance of very small repeating earthquakes on a geological fault in a gold mine in South Africa , 2018, Tectonophysics.

[9]  V. Renaud,et al.  Impact of Geological Heterogeneities on Induced-Seismicity in a Deep Sublevel Stoping Mine , 2018, Pure and Applied Geophysics.

[10]  Xibing Li,et al.  Discrimination of seismic sources in an underground mine using full waveform inversion , 2018, International Journal of Rock Mechanics and Mining Sciences.

[11]  V. Renaud,et al.  Numerical investigation of the development of the excavation damaged zone around a deep polymetallic ore mine , 2018, International Journal of Rock Mechanics and Mining Sciences.

[12]  H. Mitri,et al.  Characterization of Aseismic Fault-Slip in a Deep Hard Rock Mine Through Numerical Modelling: Case Study , 2017, Rock Mechanics and Rock Engineering.

[13]  Pierre Henry,et al.  Seismicity triggered by fluid injection–induced aseismic slip , 2015, Science.

[14]  Hiroshi Ogasawara,et al.  Steady activity of microfractures on geological faults loaded by mining stress , 2015 .

[15]  H. Mitri,et al.  Dynamic behaviour of mining-induced fault slip , 2014 .

[16]  R. Hanssen,et al.  Overview of a range of solution methods for elastic dislocation problems in geophysics , 2013 .

[17]  G. King,et al.  Seismic slip, aseismic slip, and the mechanics of repeating earthquakes on the Calaveras fault, california , 2013 .

[18]  Stephen D. McKinnon,et al.  The role of geologic structure and stress in triggering remote seismicity in Creighton Mine, Sudbury, Canada , 2013 .

[19]  Demian M. Saffer,et al.  Weakness of the San Andreas Fault revealed by samples from the active fault zone , 2011 .

[20]  J. Piguet,et al.  Impact of epoxy glue curing time on the quality of overcoring stress measurements in low-temperature environments , 2010 .

[21]  A. Lomax,et al.  Management of Post-mining Large-scale Ground Failures: Blast Swarms Field Experiment for Calibration of Permanent Microseismic Early-warning Systems , 2010 .

[22]  C. Marone,et al.  Frictional and hydrologic properties of clay‐rich fault gouge , 2009 .

[23]  Michael Alber,et al.  Rock mechanical investigations of seismic events in a deep longwall coal mine , 2009 .

[24]  P. Bernard,et al.  Evidence for coupled seismic and aseismic fault slip during water injection in the geothermal site of Soultz (France), and implications for seismogenic transients , 2007 .

[25]  S. Mckinnon.  Triggering of Seismicity Remote from Active Mining Excavations , 2006 .

[26]  C. Marone,et al.  Comparison of smectite- and illite-rich gouge frictional properties: application to the updip limit of the seismogenic zone along subduction megathrusts , 2003 .

[27]  Akira Hasegawa,et al.  Repeating earthquakes and interplate aseismic slip in the northeastern Japan subduction zone , 2003 .

[28]  T. Jordan,et al.  Seismicity in Deep Gold Mines of South Africa: Implications for Tectonic Earthquakes , 2002 .

[29]  P. K. Kaiser,et al.  Quantification of rock mass damage in underground excavations from microseismic event monitoring , 2001 .

[30]  T. Urbancic,et al.  Recent advances in seismic monitoring technology at Canadian mines , 2000 .

[31]  T. McEvilly,et al.  Fault slip rates at depth from recurrence intervals of repeating microearthquakes , 1999, Science.

[32]  S. K. Arora,et al.  Use of mining and seismological parameters as premonitors of rockbursts , 1997 .

[33]  W Foxall,et al.  Clustering and Periodic Recurrence of Microearthquakes on the San Andreas Fault at Parkfield, California , 1995, Science.

[34]  J. Rice.  Spatio‐temporal complexity of slip on a fault , 1993 .

[35]  Y. Okada.  Internal deformation due to shear and tensile faults in a half-space , 1992, Bulletin of the Seismological Society of America.

[36]  William L. Ellsworth,et al.  Monitoring velocity variations in the crust using earthquake doublets: An application to the Calaveras Fault, California , 1984 .

[37]  A. McGarr,et al.  Seismic moments and volume changes , 1976 .

[38]  Pascal Bernard,et al.  Methodology for Full Waveform Near Real-Time Automatic Detection and Localization of Microseismic Events Using High (8 kHz) Sampling Rate Records in Mines: Application to the Garpenberg Mine (Sweden) , 2019 .

[39]  S. Gibowicz,et al.  Seismicity Induced by Mining: Recent Research , 2009 .

[40]  Daniel Heal,et al.  Seismic monitoring in mines - Old technology - New Applications , 2003 .

[41]  G. Worotnicki,et al.  CSIRO Triaxial Stress Measurement Cell , 1993 .

[42]  W. C. Lin,et al.  Collisionless solar wind in the spiral magnetic field , 1972 .