Composite materials in ancient structures

Mortars and concretes employed in ancient structures concern composite materials which have exhibited excellent durability through time. They were used as lining materials in cisterns, wells, aqueducts, shafts and duct drains, as supporting materials for pavements and mosaics, as plasters on external and internal walls, as supporting materials for frescoes and as joint mortars on masonry structures. They were comprised of various binding materials (or mix of them) and natural or artificial aggregates, along with natural or artificial pozzolanic additions, primarily of volcanic origin, that improved their performance and prolonged their longevity. Moreover, various types of organic substances were employed to increase plasticity and regulate setting rates, while fibrous materials were commonly used to obtain greater strengths or to avoid cracks due to the shrinkage during setting. The comprehension of the production procedures employed and of the physico-chemical and mechanical characteristics of such composite materials can be achieved by integrating properly the results of various analyses. Data obtained from tests performed on a large number of historic composites sampled from ancient structures in the Mediterranean Basin permitted the identification of physico-chemical and mechanical characteristics of the most typical mortars encountered in ancient structures.

[1]  Vincenzo Scamozzi,et al.  L'idea della architettura universale , 1838 .

[2]  Rowland Mainstone,et al.  Hagia Sophia Architecture, Structure and Liturgy of Justinian's Great Church , 1988 .

[3]  G. Koukis,et al.  Engineering geology of ancient works, monuments, and historical sites , 1990 .

[4]  G. Chiari,et al.  Caratterizzazione delle malte antiche mediante l'analisi di campioni non frazionati , 1992 .

[5]  Antonia Moropoulou,et al.  Physico-chemical adhesion and cohesion bonds in joint mortars imparting durability to the historic structures , 2000 .

[6]  A. Moropoulou,et al.  Characterization of structural byzantine mortars by thermogravimetric analysis , 1998 .

[7]  Antonia Moropoulou,et al.  Investigation of the technology of historic mortars , 2000 .

[8]  J. Adams,et al.  Thermal analytical investigation of unaltered Ca(OH)2 in dated mortars and plasters , 1998 .

[9]  Antonia Moropoulou,et al.  Correlation of physicochemical and mechanical properties of historical mortars and classification by multivariate statistics , 2003 .

[10]  E. Katsaragakis.  A new tensile test for concrete , 1987 .

[11]  L. B. Alberti,et al.  Ten books on architecture , 1956 .

[12]  Luigia Binda,et al.  Study of the pozzolanicity of some bricks and clays , 1997 .

[13]  Antonia Moropoulou,et al.  RANGE OF ACCEPTABILITY LIMITS OF PHYSICAL, CHEMICAL AND MECHANICAL CHARACTERISTICS DERIVING FROM THE EVALUATION OF HISTORIC MORTARS , 1998, PACT 1998.

[14]  Yosef Garfinkel,et al.  PREHISTORY OF CONCRETE , 1991 .

[15]  Luigia Binda,et al.  The role of brick pebbles and dust in conglomerates based on hydrated lime and crushed bricks , 1997 .

[16]  Norman Davey,et al.  A history of building materials , 1961 .

[17]  Antonia Moropoulou,et al.  Advanced Byzantine cement based composites resisting earthquake stresses: the crushed brick/lime mortars of Justinian's Hagia Sophia , 2002 .

[18]  L. Sickels.  Organic additives in mortars , 1981 .

[19]  Andrea Palladio,et al.  I quattro libri dell'architettura , 1979 .

[20]  Antonia Moropoulou,et al.  Characterization of ancient, byzantine and later historic mortars by thermal and X-ray diffraction techniques☆ , 1995 .

[21]  Antonia Moropoulou,et al.  Physico-chemical study of Cretan ancient mortars , 2003 .

[22]  F. Lea.  The chemistry of cement and concrete , 1970 .

[23]  Antonia Moropoulou,et al.  Traditional technologies in Crete providing mortars with effective mechanical properties , 1970 .