Experimental evaluation of three heating systems commonly used in the residential sector

Abstract The residential sector consumes a considerable amount of energy for heating and preparing hot water. Little research has been conducted on heating systems in multifamily buildings under working conditions. This article presents the results of experimental research on three commonly used heating systems in multifamily buildings. A central heating and central domestic hot water system (system A), a decentralised system using residential thermal stations (system B) and a decentralised system using bi-functional gas boilers (system C) were analysed over a one year period. The systems analysed were in use in multifamily buildings in Lublin, Poland. The average annual efficiency for system A was 59.6%, that for system B was 70.1% and that for system C, 90.5%. The study determined the decrease in efficiency when the system was producing hot water only versus the system operating during the heating season. These decreases amounted to 20.7% for system A and 8% for system B. The amount of heat delivered and that lost in the respective heating systems were calculated and their relative advantages and disadvantages were identified. Special attention was paid to the amount of heat used for heating the flats of the buildings.

[1]  Agis M. Papadopoulos,et al.  Energy, economic and environmental performance of heating systems in Greek buildings , 2008 .

[2]  Mikael Rönnqvist,et al.  Optimal Heating of Large Block of Flats , 2008 .

[3]  Anibal T. de Almeida,et al.  Evaluation of fuel-switching opportunities in the residential sector , 2004 .

[4]  Christian Ghiaus,et al.  Optimal settings of residential oil burners , 2002 .

[5]  H.S. Matthews,et al.  Scoping the potential of monitoring and control technologies to reduce energy use in homes , 2007, Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment.

[6]  William D'haeseleer,et al.  Control of heating systems in residential buildings: Current practice , 2008 .

[7]  Constantinos A. Balaras,et al.  Heating energy consumption and resulting environmental impact of European apartment buildings , 2005 .

[8]  Jin Woo Moon,et al.  Thermostat strategies impact on energy consumption in residential buildings , 2011 .

[9]  Christian Ghiaus,et al.  Free-running building temperature and HVAC climatic suitability , 2003 .

[10]  Peter Boait,et al.  A method for fully automatic operation of domestic heating. , 2010 .

[11]  Per O. Danig,et al.  Monitoring the energy consumption in a district heated apartment building in Copenhagen, with specific interest in the thermodynamic performance , 2004 .

[12]  P. Wolfe.  The implications of an increasingly decentralised energy system , 2008 .

[13]  M. Newborough,et al.  Dynamic energy-consumption indicators for domestic appliances: environment, behaviour and design , 2003 .

[14]  Osamu Saeki,et al.  Effectiveness of an energy-consumption information system for residential buildings , 2006 .

[15]  Louise Trygg,et al.  Energy conservation measures in buildings heated by district heating – A local energy system perspective , 2010 .

[16]  Cristian Ghiaus.  Equivalence between the load curve and the free-running temperature in energy estimating methods , 2006 .

[17]  Jinlong Ouyang,et al.  Energy-saving potential by improving occupants’ behavior in urban residential sector in Hangzhou City, China , 2009 .

[18]  Stig-Inge Gustafsson,et al.  Multi-Criteria Evaluation of Residential Energy Supply Systems , 2007 .

[19]  K. Wojdyga,et al.  An influence of weather conditions on heat demand in district heating systems , 2008 .

[20]  L. Gustavsson,et al.  Life cycle primary energy analysis of residential buildings , 2010 .

[21]  Tomasz Cholewa,et al.  Experimental investigations of a decentralized system for heating and hot water generation in a residential building , 2010 .