Global overview on advances in structural health monitoring platforms

[1]  Humberto Varum,et al.  Liquid level gauge based in plastic optical fiber , 2015 .

[2]  Filippo Ubertini,et al.  Electromechanical modelling of a new class of nanocomposite cement-based sensors for structural health monitoring , 2015 .

[3]  Ki-Young Koo,et al.  Measuring and modelling the thermal performance of the Tamar Suspension Bridge using a wireless sensor network , 2015 .

[4]  A. Naghashpour,et al.  A technique for real-time detecting, locating, and quantifying damage in large polymer composite structures made of carbon fibers and carbon nanotube networks , 2015 .

[5]  Kazuhisa Yoda,et al.  Building application of recycled aggregate concrete for upper-ground structural elements , 2014 .

[6]  X. W. Ye,et al.  Structural Health Monitoring of Civil Infrastructure Using Optical Fiber Sensing Technology: A Comprehensive Review , 2014, TheScientificWorldJournal.

[7]  Jian Liang,et al.  Low-Cost Multipoint Liquid-Level Sensor With Plastic Optical Fiber , 2014, IEEE Photonics Technology Letters.

[8]  Peng Zhang,et al.  Deformation monitoring of a super-tall structure using real-time strain data , 2014 .

[9]  Gilbert-Rainer Gillich,et al.  Modal identification and damage detection in beam-like structures using the power spectrum and time-frequency analysis , 2014, Signal Process..

[10]  David P. Thambiratnam,et al.  Structural damage detection method using frequency response functions , 2014 .

[11]  Lijun Wu,et al.  Dynamic testing of a laboratory model via vision-based sensing , 2014 .

[12]  Filipe Magalhães,et al.  Dynamic monitoring of a stadium suspension roof: Wind and temperature influence on modal parameters and structural response , 2014 .

[13]  C. G. Chiorean,et al.  A computer method for nonlinear inelastic analysis of 3D composite steel–concrete frame structures , 2013 .

[14]  Gerardo M. Verderame,et al.  Non-destructive characterization and dynamic identification of a modern heritage building for serviceability seismic analyses , 2013 .

[15]  Gabriele Milani,et al.  Lesson learned after the Emilia-Romagna, Italy, 20–29 May 2012 earthquakes: A limit analysis insight on three masonry churches , 2013 .

[16]  Luca Benini,et al.  Long term, low cost, passive environmental monitoring of heritage buildings for energy efficiency retrofitting , 2013, 2013 IEEE Workshop on Environmental Energy and Structural Monitoring Systems.

[17]  N. Takeda,et al.  Recent advancement in optical fiber sensing for aerospace composite structures , 2013, Photonic Sensors.

[18]  Nobuo Takeda,et al.  Recent advancement in optical fiber sensing for aerospace composite structures , 2013 .

[19]  Lei Wang,et al.  Review of Benchmark Studies and Guidelines for Structural Health Monitoring , 2013 .

[20]  Dan M. Frangopol,et al.  Incorporation of structural health monitoring data on load effects in the reliability and redundancy assessment of ship cross-sections using Bayesian updating , 2013 .

[21]  Tanya M. Monro,et al.  Optical Fibres for Distributed Corrosion Sensing - Architecture and Characterisation , 2013 .

[22]  A A Golafshani,et al.  Damage detection of offshore jacket structures using frequency domain selective measurements , 2013, Journal of Marine Science and Application.

[23]  Daniela Isidori,et al.  A low-cost structural health monitoring system for residential buildings: experimental tests on a scale model , 2013 .

[24]  Alireza Rahai,et al.  Theoretical and experimental structural damage diagnosis method using natural frequencies through an improved sensitivity equation , 2013 .

[25]  Jianhua Zhang,et al.  On-Board Computing for Structural Health Monitoring with Smart Wireless Sensors by Modal Identification Using Hilbert-Huang Transform , 2013 .

[26]  Farid Taheri,et al.  Improvement of a vibration-based damage detection approach for health monitoring of bolted flange joints in pipelines , 2013 .

[27]  E. Monteiro,et al.  Influence of cement type in reinforcement corrosion of mortars under action of chlorides , 2013 .

[28]  Liberato Ferrara,et al.  Low Frequency Electrical and Magnetic Methods for Non-Destructive Analysis of Fiber Dispersion in Fiber Reinforced Cementitious Composites: An Overview , 2013, Sensors.

[29]  Paulo André,et al.  Structural health monitoring of different geometry structures with optical fiber sensors , 2012 .

[30]  Humberto Varum,et al.  Optical fiber sensors for static and dynamic health monitoring of civil engineering infrastructures: Abode wall case study , 2012 .

[31]  Hong Hao,et al.  Using vibration phase space topology changes for structural damage detection , 2012 .

[32]  Sung-Han Sim,et al.  A decentralized receptance-based damage detection strategy for wireless smart sensors , 2012 .

[33]  N. Xie,et al.  Durability of steel reinforced concrete in chloride environments: An overview , 2012 .

[34]  Filipe Magalhães,et al.  Vibration based structural health monitoring of an arch bridge: From automated OMA to damage detection , 2012 .

[35]  Peter Horst,et al.  Monitoring of multiaxial fatigue damage evolution in impacted composite tubes using non-destructive evaluation , 2012 .

[36]  Eric Strobl,et al.  Economic development and losses due to natural disasters: The role of hazard exposure , 2011 .

[37]  Dan M. Frangopol,et al.  Computational platform for the integrated life-cycle management of highway bridges , 2011 .

[38]  N. Roussel,et al.  Properties of fresh and hardened concrete , 2011 .

[39]  Hiroshi Sato,et al.  Platform for structural health monitoring of buildings utilizing smart sensors and advanced diagnosis tools , 2010 .

[40]  Thomas Clarke,et al.  Monitoring the structural integrity of a flexible riser during dynamic loading with a combination of non-destructive testing methods , 2010 .

[41]  Carlos Rodrigues,et al.  Development of a long-term monitoring system based on FBG sensors applied to concrete bridges , 2010 .

[42]  Filipe Magalhães,et al.  Ambient vibration re-testing and operational modal analysis of the Humber Bridge , 2010 .

[43]  Gianfranco Manes,et al.  An Embedded Wireless Sensor Network System for Cultural Heritage Monitoring , 2010, 2010 Fourth International Conference on Sensor Technologies and Applications.

[44]  Yang Wang,et al.  Multi-agent system design and evaluation for collaborative wireless sensor network in large structure health monitoring , 2010, Expert Syst. Appl..

[45]  Ming Gu,et al.  Full-scale measurements of dynamic response of suspension bridge subjected to environmental loads using GPS technology , 2010 .

[46]  Romeo Giuliano,et al.  Monitoring and vibration risk assessment in cultural heritage via Wireless Sensors Network , 2009, 2009 2nd Conference on Human System Interactions.

[47]  Aníbal Costa,et al.  Weldable fibre Bragg grating sensors for steel bridge monitoring , 2008 .

[48]  Tong Guo,et al.  Influence of ambient temperature on the fatigue damage of welded bridge decks , 2008 .

[49]  Christoph Klinzmann,et al.  A framework for reliability-based system assessment based on structural health monitoring , 2008 .

[50]  Brian Culshaw,et al.  Structural Damage Location with Fiber Bragg Grating Rosettes and Lamb Waves , 2007 .

[51]  H.J. Kalinowski,et al.  Structural Health Monitoring of the Church of Santa Casa da MisericÓrdia of Aveiro Using FBG Sensors , 2007, IEEE Sensors Journal.

[52]  Charles R. Farrar,et al.  The fundamental axioms of structural health monitoring , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[53]  Wayne Santos de Assis,et al.  Sistemas computacionais de apoio à monitoração de estruturas de engenharia civil. , 2007 .

[54]  Keith Worden,et al.  An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[55]  J M W Brownjohn,et al.  Structural health monitoring of civil infrastructure , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[56]  Hoon Sohn,et al.  Effects of environmental and operational variability on structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[57]  Victor Giurgiutiu,et al.  DIRECT INTEGRATION OF THIN FILM PIEZOELECTRIC SENSORS WITH STRUCTURAL MATERIALS FOR STRUCTURAL HEALTH MONITORING , 2006 .

[58]  Wei Zhang,et al.  Health Monitoring of Rehabilitated Concrete Bridges Using Distributed Optical Fiber Sensing , 2006, Comput. Aided Civ. Infrastructure Eng..

[59]  Jerome P. Lynch,et al.  A summary review of wireless sensors and sensor networks for structural health monitoring , 2006 .

[60]  Stewart G Trost,et al.  Conducting accelerometer-based activity assessments in field-based research. , 2005, Medicine and science in sports and exercise.

[61]  Billie F. Spencer,et al.  Risk monitoring of buildings with wireless sensor networks , 2005 .

[62]  Piotr Omenzetter,et al.  Identification of unusual events in multi-channel bridge monitoring data , 2004 .

[63]  Emmanuel Skoufias,et al.  Economic Crises and Natural Disasters: Coping Strategies and Policy Implications , 2003 .

[64]  Jonathan M. Nichols,et al.  Structural health monitoring of offshore structures using ambient excitation , 2003 .

[65]  Fernando Gustavo Tomasel,et al.  Simple swept-sine analyzer for excitation and measurement of dynamic response in ocean structures , 2002 .

[66]  P. K. Mehta,et al.  Greening of the Concrete Industry for Sustainable Development , 2002 .

[67]  Hoon Sohn,et al.  A review of structural health monitoring literature 1996-2001 , 2002 .

[68]  Thomas C. Melvin,et al.  European Patent Office , 2002 .

[69]  Kevin R. Harwell.  United States Patent and Trademark Office , 2002 .

[70]  Michael White,et al.  World Intellectual Property Organization , 2000, Permanent Missions to the United Nations, No. 309.

[71]  Charles R. Farrar,et al.  A summary review of vibration-based damage identification methods , 1998 .

[72]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[73]  A. Rotem,et al.  Determination of Reinforcement Unbonding of Composites by a Vibration Technique , 1969 .

[74]  Werner Daum,et al.  Guidelines for Structural Health Monitoring , 2013 .

[75]  Yi-Qing Ni,et al.  Integrating bridge structural health monitoring and condition-based maintenance management , 2012 .

[76]  Zhao Zheng-tang,et al.  Natural Catastrophe Risk, Insurance and Economic Development , 2011 .

[77]  Sung-Han Sim,et al.  Decentralized random decrement technique for efficient data aggregation and system identification in wireless smart sensor networks , 2011 .

[78]  Humberto Varum,et al.  Uniaxial fiber Bragg grating accelerometer system with temperature and cross axis insensitivity , 2011 .

[79]  Helmut Wenzel,et al.  Health monitoring of bridges , 2009 .

[80]  Tat S. Fu.  Smart buildings: Synergy in structural control, structural health monitoring and environmental systems , 2009 .

[81]  Douglas E. Adams,et al.  Health monitoring of structural materials and components : methods with applications , 2007 .

[82]  G A Parke,et al.  Guideline for the assessment of existing structures , 2005 .

[83]  Erik A. Johnson,et al.  Phase I IASC-ASCE Structural Health Monitoring Benchmark Problem Using Simulated Data , 2004 .