Inkjet printing of chemiresistive sensors based on polymer and carbon nanotube networks

We report about the manufacturing of sensor devices for detection of volatile organic compounds (VOCs) in the air. The sensor comprises three fully inkjet-printed layers of (i) silver interdigitated electrodes (SIDE), (ii) multi-walled carbon nanotubes (MWCNTs) and (iii) poly (styrene-co-maleic acid) partial isobutyl/methyl mixed ester (PSE). We have found that inkjet printing of MWCNT layers and a PSE layer on top yields an interfacial layer leading to the formation of a MWCNTs/PSE composite-like structure. The printed layers act as chemiresistive vapor sensors due to the change of electrical resistance in presence of selected VOCs. The sensor responses to various VOCs were studied by varying the concentration of the chemicals in the air between 50 and 500 ppm. The sensing mechanism can be understood as a fractional volume change of the inkjet-printed polymer that occurs during exposure to VOCs, resulting in a structural alteration of the MWCNT-polymer network. We have found that the sensor response can be defined as a function of the VOC's concentration. To investigate the morphologies of the inkjet-printed thin films, profilometry and scanning electron microscopy (SEM) were employed.

[1]  V. Singh,et al.  MWCNT–polymer composites as highly sensitive and selective room temperature gas sensors , 2011, Nanotechnology.

[2]  Je Hoon Oh,et al.  Evaluation of the limit-of-detection capability of carbon black-polymer composite sensors for volatile breath biomarkers , 2010 .

[3]  M. Kitsara,et al.  Sequential polymer lithography for chemical sensor arrays , 2007 .

[4]  Joondong Kim,et al.  Inkjet printing of single-walled carbon nanotubes and electrical characterization of the line pattern , 2008, Nanotechnology.

[5]  A. Blayo,et al.  Impact of ink formulation on carbon nanotube network organization within inkjet printed conductive films , 2011 .

[6]  Jun Long Lim,et al.  Self‐Organization of Ink‐jet‐Printed Triisopropylsilylethynyl Pentacene via Evaporation‐Induced Flows in a Drying Droplet , 2008 .

[7]  Robert C. Haddon,et al.  Chemically Functionalized Single-Walled Carbon Nanotubes as Ammonia Sensors† , 2004 .

[8]  Nathan S. Lewis,et al.  Detection of organic vapors and NH3(g) using thin-film carbon black–metallophthalocyanine composite chemiresistors , 2008 .

[9]  Dae Sik Lee,et al.  Fluidic Properties of Carbon Nanotube Inks and Field Emission Properties of Ink Jet-Printed Emitters , 2009 .

[10]  H. Troy Nagle,et al.  Handbook of Machine Olfaction: Electronic Nose Technology , 2003 .

[11]  Teerakiat Kerdcharoen,et al.  An electronic nose for amine detection based on polymer/SWNT-COOH nanocomposites , 2010 .

[12]  Khalil Arshak,et al.  A review of gas sensors employed in electronic nose applications , 2004 .

[13]  Yun Wang,et al.  A Review of Carbon Nanotubes-Based Gas Sensors , 2009, J. Sensors.

[14]  A M , ETHOD OF MEASURING THE RESISTIVITY AND HALL ' COEFFICIENT ON LAMELLAE OF ARBITRARY SHAPE , 2014 .

[15]  H. T. Nagle,et al.  Handbook of Machine Olfaction , 2002 .

[16]  Khalil Arshak,et al.  Front‐end signal conditioning used for resistance‐based sensors in electronic nose systems: a review , 2003 .

[17]  Arokia Nathan,et al.  High performance nanocomposite thin film transistors with bilayer carbon nanotube-polythiophene active channel by ink-jet printing , 2009 .

[18]  M. Panhuis,et al.  Inkjet deposition and characterization of transparent conducting electroactive polyaniline composite films with a high carbon nanotube loading fraction , 2007 .

[19]  Hua Bai,et al.  Gas Sensors Based on Conducting Polymers , 2007, Sensors (Basel, Switzerland).

[20]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[21]  Vijay K. Varadan,et al.  A compact wireless gas sensor using a carbon nanotube/PMMA thin film chemiresistor , 2004 .

[22]  Kwon-Yong Shin,et al.  Silver inkjet printing with control of surface energy and substrate temperature , 2008 .