A Review of Engineering Research in Sustainable Manufacturing

Karl R. Haapala 1 School of Mechanical, Industrial, and Manufacturing Engineering, Oregon State University, 204 Rogers Hall, Corvallis, OR 97331 e-mail: Karl.Haapala@oregonstate.edu Fu Zhao School of Mechanical Engineering, Division of Environmental and Ecological Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907 e-mail: fzhao@purdue.edu Jaime Camelio Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, 235 Durham Hall, Blacksburg, VA 24061 e-mail: jcamelio@vt.edu John W. Sutherland Division of Environmental and Ecological Engineering, Purdue University, 322 Potter Engineering Center, West Lafayette, IN 47907 e-mail: jwsuther@purdue.edu Steven J. Skerlos Department of Mechanical Engineering, University of Michigan, 2250 GG Brown Building, Ann Arbor, MI 48105 e-mail: skerlos@umich.edu David A. Dornfeld Department of Mechanical Engineering, University of California, 6143 Etcheverry Hall, Berkeley, CA 94720 e-mail: dornfeld@berkeley.edu I. S. Jawahir Department of Mechanical Engineering, University of Kentucky, 414C UK Center for Manufacturing, Lexington, KY 40506 e-mail: jawahir@engr.uky.edu A Review of Engineering Research in Sustainable Manufacturing Sustainable manufacturing requires simultaneous consideration of economic, environmen- tal, and social implications associated with the production and delivery of goods. Funda- mentally, sustainable manufacturing relies on descriptive metrics, advanced decision- making, and public policy for implementation, evaluation, and feedback. In this paper, recent research into concepts, methods, and tools for sustainable manufacturing is explored. At the manufacturing process level, engineering research has addressed issues related to planning, development, analysis, and improvement of processes. At a manufac- turing systems level, engineering research has addressed challenges relating to facility operation, production planning and scheduling, and supply chain design. Though economi- cally vital, manufacturing processes and systems have retained the negative image of being inefficient, polluting, and dangerous. Industrial and academic researchers are re- imagining manufacturing as a source of innovation to meet society’s future needs by under- taking strategic activities focused on sustainable processes and systems. Despite recent developments in decision making and process- and systems-level research, many chal- lenges and opportunities remain. Several of these challenges relevant to manufacturing process and system research, development, implementation, and education are highlighted. [DOI: 10.1115/1.4024040] Andres F. Clarens Department of Civil and Environmental Engineering, University of Virginia, D220 Thornton Hall, Charlottesville, VA 22904 e-mail: aclarens@virginia.edu Jeremy L. Rickli Department of Industrial and Systems Engineering, Virginia Polytechnic Institute and State University, 217 Durham Hall, Blacksburg, VA 24061 e-mail: jlrickli@vt.edu Corresponding author. Contributed by the Manufacturing Engineering Division of ASME for publication in the J OURNAL OF M ANUFACTURING S CIENCE AND E NGINEERING . Manuscript received July 11, 2012; final manuscript received March 4, 2013; published online July 17, 2013. Editor: Y. Lawrence Yao. Manufacturing and Sustainability The concept of sustainability emerged from a series of meetings and reports in the 1970s and 1980s, and was largely motivated by environmental incidents and disasters as well as fears about Journal of Manufacturing Science and Engineering C 2013 by ASME Copyright V AUGUST 2013, Vol. 135 / 041013-1 Downloaded From: http://manufacturingscience.asmedigitalcollection.asme.org/ on 07/09/2014 Terms of Use: http://asme.org/terms