Online Lithium-Ion Battery Internal Resistance Measurement Application in State-of-Charge Estimation Using the Extended Kalman Filter

The lithium-ion battery is a viable power source for hybrid electric vehicles (HEVs) and, more recently, electric vehicles (EVs). Its performance, especially in terms of state of charge (SOC), plays a significant role in the energy management of these vehicles. The extended Kalman filter (EKF) is widely used to estimate online SOC as an efficient estimation algorithm. However, conventional EKF algorithms cannot accurately estimate the difference between individual batteries, which should not be ignored. However, the internal resistance of a battery can represent this difference. Therefore, this work proposes using an EKF with internal resistance measurement based on the conventional algorithm. Lithium-ion battery real-time resistances can help the Kalman filter overcome defects from simplistic battery models. In addition, experimental results show that it is useful to introduce online internal resistance to the estimation of SOC.

[1]  Jay Lee,et al.  A review on prognostics and health monitoring of Li-ion battery , 2011 .

[2]  Chris Manzie,et al.  A Framework for Simplification of PDE-Based Lithium-Ion Battery Models , 2016, IEEE Transactions on Control Systems Technology.

[3]  Seongjun Lee,et al.  State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge , 2008 .

[4]  Hongwen He,et al.  Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach , 2011 .

[5]  Leon R. Roose,et al.  Extended Kalman Filter with a Fuzzy Method for Accurate Battery Pack State of Charge Estimation , 2015 .

[6]  Seongjun Lee,et al.  Maximum pulse current estimation for high accuracy power capability prediction of a Li-Ion battery , 2015, Microelectron. Reliab..

[7]  Chris Manzie,et al.  Multi-time-scale observer design for state-of-charge and state-of-health of a lithium-ion battery , 2016 .

[8]  M. Armand,et al.  Building better batteries , 2008, Nature.

[9]  Ibrahim Dincer,et al.  Cycling degradation testing and analysis of a LiFePO4 battery at actual conditions , 2017 .

[10]  Bor Yann Liaw,et al.  A novel on-board state-of-charge estimation method for aged Li-ion batteries based on model adaptive extended Kalman filter , 2014 .

[11]  Andreas Jossen,et al.  Methods for state-of-charge determination and their applications , 2001 .

[12]  D. Sauer,et al.  Dynamic electric behavior and open-circuit-voltage modeling of LiFePO4-based lithium ion secondary batteries , 2011 .

[13]  Chaoyang Wang,et al.  Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles , 2006 .

[14]  Jun Xu,et al.  A new method to estimate the state of charge of lithium-ion batteries based on the battery impedance model , 2013 .

[15]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[16]  C. Moo,et al.  Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries , 2009 .

[17]  Yi-Hsien Chiang,et al.  Online estimation of internal resistance and open-circuit voltage of lithium-ion batteries in electr , 2011 .

[18]  Bor Yann Liaw,et al.  Inline state of health estimation of lithium-ion batteries using state of charge calculation , 2015 .

[19]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs Part 1. Background , 2004 .

[20]  Dirk Uwe Sauer,et al.  Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application , 2013 .

[21]  Kai Ding,et al.  Battery-Management System (BMS) and SOC Development for Electrical Vehicles , 2011, IEEE Transactions on Vehicular Technology.