Closed form solution for predicting the horizontal capacity of masonry portal frames through limit analysis and comparison with experimental test results

Abstract The paper deals with the problem of evaluating the in-plane seismic capacity of unreinforced masonry portal frame, which can be considered the basic structural element in historical buildings. In particular, the Limit Analysis approach is used to provide simplified “closed form” expressions of the horizontal collapse multiplier, also taking into account the eventual contribution of steel tie rods. Both sliding shear and shear diagonal cracking are also considered in order to take into account the shear failure modes of the pier walls. The proposed formulations have been used for performing an extensive parametric analysis, with the aim of studying the effect of both geometry and vertical/horizontal loading distributions on the portal horizontal strength. Furthermore, the influence of the steel tie-rods has been addressed in order to understand their effectiveness on the portal seismic capacity. A comparison with the results of experimental tests on full-scale portal frames is also provided in terms of in-plane collapse multiplier and failure mechanism aimed to validate the proposed “closed form” expressions. Major outcome of this study is a simple rule of thumb, which can be used for the straightforward assessment of the horizontal strength of simple masonry structures, and for verifying the results of more complex structural analyses such as the nonlinear static analysis.

[1]  Thomas E. Boothby.  Analysis of masonry arches and vaults , 2001 .

[2]  Jacques Heyman,et al.  The stone skeleton , 1995 .

[3]  Clive. Melbourne,et al.  RIGID-BLOCK ANALYSIS OF MASONRY STRUCTURES , 1994 .

[4]  Philippe Block,et al.  Real-time limit analysis of vaulted masonry buildings , 2006 .

[5]  Paolo Foraboschi,et al.  In-plane behavior of perforated brick masonry walls , 2012 .

[6]  Sergio Lagomarsino,et al.  DAMAGE MODELS FOR THE SEISMIC RESPONSE OF BRICK MASONRY SHEAR WALLS. PART II: THE CONTINUUM MODEL AND ITS APPLICATIONS , 1997 .

[7]  Giuseppe Brandonisio,et al.  Damage and performance evaluation of masonry churches in the 2009 L’Aquila earthquake , 2013 .

[8]  C A Coulomb,et al.  ESSAI SUR UNE APPLICATION DES REGLES DE MAXIMIS ET MINIMIS A QUELQUES PROBLEMES DE STATIQUE RELATIFS A L'ARCHITECTURE (ESSAY ON MAXIMUMS AND MINIMUMS OF RULES TO SOME STATIC PROBLEMS RELATING TO ARCHITECTURE) , 1973 .

[9]  O. Kamal,et al.  Structural performance of confined masonry walls retrofitted using ferrocement and GFRP under in-plane cyclic loading , 2015 .

[10]  P. Lourenço.  Computational strategies for masonry structures : Proefschrift , 1996 .

[11]  Giuseppe Brandonisio,et al.  Seismic damage and performance of Palazzo Centi after L’Aquila earthquake: A paradigmatic case study of effectiveness of mechanical steel ties , 2013 .

[12]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[13]  Miguel Cervera,et al.  Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches , 2010 .

[14]  Mario Como,et al.  Statics of Historic Masonry Constructions , 2012 .

[15]  Alberto Maria Avossa,et al.  Seismic performance assessment of masonry structures with a modified “concrete” model , 2015, Bulletin of Earthquake Engineering.

[16]  S. Pietruszczak,et al.  A mathematical description of macroscopic behaviour of brick masonry , 1992 .

[17]  Sergio Lagomarsino,et al.  Damage assessment of churches after L’Aquila earthquake (2009) , 2012, Bulletin of Earthquake Engineering.

[18]  Gabriele Milani,et al.  Homogenization techniques for in and out-of-plane loaded masonry walls , 2010 .

[19]  Miha Tomazevic,et al.  Earthquake-Resistant Design of Masonry Buildings , 1999 .

[20]  A. Kooharian.  Limit Analysis of Voussoir (Segmental) and Concrete Archs , 1952 .

[21]  Paolo Foraboschi,et al.  Coupling effect between masonry spandrels and piers , 2009 .

[22]  A. Page.  Finite Element Model for Masonry , 1978 .

[23]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[24]  R. Livesley.  Limit analysis of structures formed from rigid blocks , 1978 .

[25]  R. Luciano,et al.  Homogenization technique and damage model for old masonry material , 1997 .

[26]  P. B. Shing,et al.  An appraisal of smeared crack models for masonry shear wall analysis , 1991 .

[27]  Elena Mele,et al.  A simplified procedure for assessing the seismic capacity of masonry arches , 2004 .

[28]  G. Felice,et al.  A homogenization approach to the ultimate strength of brick masonry , 1997 .

[29]  A. Prota,et al.  In-Plane Lateral Response of a Full-Scale Masonry Subassemblage with and without an Inorganic Matrix-Grid Strengthening System , 2011 .

[30]  Paulo B. Lourenço,et al.  Limit analysis as a tool for the simplified assessment of ancient masonry structures , 2001 .

[31]  Giuseppe Brandonisio,et al.  Multi-storey masonry buildings: evaluation of effectiveness of mechanical strengthening , 2013 .

[32]  A. Anthoine.  Derivation of the in-plane elastic characteristics of masonry through homogenization theory , 1995 .

[33]  Franco Bontempi,et al.  Pushover seismic analysis of masonry buildings with different commercial codes , 2013 .

[34]  Clive. Melbourne,et al.  ANALYSIS OF MULTI-RING BRICKWORK ARCH BRIDGES , 1995 .

[35]  Claude Navier,et al.  Resume Des Lecons Donnees A L'Ecole Des Ponts Et Chaussees Sur L'Application de La Mecanique A L'Etablissement Des Constructions Et Des Machines , 2013 .

[36]  Ileana Corbi,et al.  FRP REINFORCEMENT OF MASONRY PANELS BY MEANS OF C-FIBER STRIPS , 2013 .

[37]  Alexandre A. Costa,et al.  FIELD OBSERVATIONS AND INTERPRETATION OF THE STRUCTURAL PERFORMANCE OF CONSTRUCTIONS AFTER THE 11 MAY 2011 LORCA EARTHQUAKE , 2013 .

[38]  José V. Lemos,et al.  Discrete Element Modeling of Masonry Structures , 2007 .

[39]  Bernard Amadei,et al.  Repair and Retrofit of Unreinforced Masonry Structures , 1996 .

[40]  P. Trovalusci,et al.  Limit Analysis for No-Tension and Frictional Three-Dimensional Discrete Systems* , 1998 .

[41]  A. Anthoine,et al.  In-plane and out-of-plane homogenisation of masonry , 2007 .

[42]  Arnold W. Hendry,et al.  Design of Masonry Structures , 2003 .

[43]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[44]  Paulo B. Lourenço,et al.  Homogenization approach for the limit analysis of out-of-plane loaded masonry walls , 2006 .

[45]  Elena Mele,et al.  A simple formula for predicting the horizontal capacity of masonry portal frames , 2007 .

[46]  M. Angelillo,et al.  Singular stress fields in masonry structures: Derand was right , 2014 .

[47]  Maurizio Angelillo,et al.  Constitutive relations for no-tension materials , 1993 .

[48]  Maura Imbimbo,et al.  Limit analysis of the structures of Colosseum , 2001 .

[49]  Gabriele Milani,et al.  Homogenised limit analysis of masonry walls, Part II: Structural examples , 2006 .

[50]  Paulo B. Lourenço,et al.  Abbreviated Title : Homogenised limit analysis of masonry , failure surfaces , 2007 .

[51]  Giuseppe Brandonisio,et al.  Restoration Through a Traditional Intervention of a Historic Unreinforced Masonry Building “Palazzo Scarpa” in Naples , 2013 .

[52]  Paulo B. Lourenço,et al.  A micro-mechanical model for the homogenisation of masonry , 2002 .

[53]  P. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART II. MECHANICAL CALCULATIONS FOR MOTION AND INTERACTION OF A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .