Well-aligned and suspended single-walled carbon nanotube film: Directed self-assembly, patterning, and characterization

Self-assembly process, patterning, and characterization of well-aligned single-walled carbon nanotube (SWNT) films are presented in this letter. The dc current in an ac dielectrophoresis of an SWNT solution was measured and used to control the self-assembly process to get an oriented, compact SWNT film 15–20 nm thick. The film was further patterned to form submicron beams by focused ion beams, or lithography and oxygen plasma etching. The Young’s modulus of the film ranged from 350 to 830 GPa. The electrical resistivity was about 8.7×10−3 Ω cm. The temperature coefficient of resistance was −1.2%/K.

[1]  S. Barman,et al.  Self-Sorted, Aligned Nanotube Networks for Thin-Film Transistors , 2008, Science.

[2]  Jun Jiao,et al.  Floating-potential dielectrophoresis-controlled fabrication of single-carbon-nanotube transistors and their electrical properties. , 2005, The journal of physical chemistry. B.

[3]  E. Campbell,et al.  Production of individual suspended single-walled carbon nanotubes using the ac electrophoresis technique , 2004 .

[4]  John A. Rogers,et al.  Solution Casting and Transfer Printing Single-Walled Carbon Nanotube Films , 2004 .

[5]  G. A. D. Briggs,et al.  Elastic and shear moduli of single-walled carbon nanotube ropes , 1999 .

[6]  R. Osiander,et al.  Wafer-level assembly of carbon nanotube networks using dielectrophoresis , 2008, Nanotechnology.

[7]  Li Zhang,et al.  Langmuir-blodgett assembly of densely aligned single-walled carbon nanotubes from bulk materials. , 2007, Journal of the American Chemical Society.

[8]  Xinqi Chen,et al.  Aligning single-wall carbon nanotubes with an alternating-current electric field , 2001 .

[9]  Irving P. Herman,et al.  Precise positioning of single-walled carbon nanotubes by ac dielectrophoresis , 2006 .

[10]  J. P. Zhang,et al.  Controlled production of aligned-nanotube bundles , 1997, Nature.

[11]  P. Bøggild,et al.  Dielectrophoresis of carbon nanotubes using microelectrodes: a numerical study , 2004 .

[12]  R. Krupke,et al.  Surface Conductance Induced Dielectrophoresis of Semiconducting Single-Walled Carbon Nanotubes , 2004 .

[13]  Maurizio Prato,et al.  Molecular design of strong single-wall carbon nanotube/polyelectrolyte multilayer composites , 2002, Nature materials.

[14]  Robert C. Davis,et al.  Integrated three-dimensional microelectromechanical devices from processable carbon nanotube wafers. , 2008, Nature nanotechnology.

[15]  Un Jeong Kim,et al.  Direct printing of aligned carbon nanotube patterns for high-performance thin film devices , 2009 .

[16]  John Hedley,et al.  Accurate force measurement in the atomic force microscope: a microfabricated array of reference springs for easy cantilever calibration , 2003 .

[17]  Young Hee Lee,et al.  Crystalline Ropes of Metallic Carbon Nanotubes , 1996, Science.

[18]  E. Mendoza,et al.  Dielectrophoretic manipulation of fluorescing single‐walled carbon nanotubes , 2007, Electrophoresis.

[19]  Hyunhyub Ko,et al.  Liquid-crystalline processing of highly oriented carbon nanotube arrays for thin-film transistors. , 2006, Nano letters.

[20]  M. V. van Huis,et al.  Atomic Pillar-Based Nanoprecipitates Strengthen AlMgSi Alloys , 2006, Science.