Orthogonal turning of AISI 310S austenitic stainless steel under hybrid nanofluid-assisted MQL and a sustainability optimization using NSGA-II and TOPSIS

[1]  Navneet Khanna,et al.  Investigation of the Effects of Hybrid Nanofluid-Mql Conditions in Orthogonal Turning and a Sustainability Assessment , 2023, SSRN Electronic Journal.

[2]  P. Sivaiah,et al.  Investigation on turning process performance during machining of 15-5PH stainless steel material with eco-friendly machining technique , 2023, Materials Today: Proceedings.

[3]  Jianghong Wu,et al.  Life Cycle Climate Performance Evaluation of Electric Vehicle Thermal Management System Under Chinese Climate and Driving Condition , 2023, Social Science Research Network.

[4]  A. Sharma,et al.  State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL) , 2023, Lubricants.

[5]  G. Królczyk,et al.  Analysis of size and concentration of nanoparticles contained in cutting fluid during turning of 316L steel in minimum quantity lubrication conditions , 2023, Journal of Manufacturing Processes.

[6]  G. Królczyk,et al.  Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments , 2023, Heliyon.

[7]  V. Dubey,et al.  A short review on hybrid nanofluids in machining processes , 2023 .

[8]  P. P,et al.  Experimental investigation on CNC turning of SS304 using nano particle based minimum quantity lubrication , 2023, Materials Today: Proceedings.

[9]  Navneet Khanna,et al.  Resource conservation and sustainable development in the metal cutting industry within the framework of the green economy concept: An overview and case study , 2022, Sustainable Materials and Technologies.

[10]  S. Vijayakumar,et al.  Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304 , 2022, Materials Today: Proceedings.

[11]  F. Pušavec,et al.  Energy consumption and ecological analysis of sustainable and conventional cutting fluid strategies in machining 15–5 PHSS , 2022, Sustainable Materials and Technologies.

[12]  S. H. M. Anijdan,et al.  Experimental investigation on the effect of gas tungsten arc welding current modes upon the microstructure, mechanical, and fractography properties of welded joints of two grades of AISI 316L and AISI310S alloy metal sheets , 2022, Materials Science and Engineering: A.

[13]  T. Kıvak,et al.  A comparative study on the tribological behavior of mono&proportional hybrid nanofluids for sustainable turning of AISI 420 hardened steel with cermet tools , 2022, Journal of Manufacturing Processes.

[14]  Mehmet Boy,et al.  Measurement and analysis of machining induced tribological characteristics in dual jet minimum quantity lubrication assisted turning of duplex stainless steel , 2022, Measurement.

[15]  D. Pimenov,et al.  Study of a Multicriterion Decision-Making Approach to the MQL Turning of AISI 304 Steel Using Hybrid Nanocutting Fluid , 2021, Materials.

[16]  S. To,et al.  Analytical modeling and prediction of cutting forces in orthogonal turning: a review , 2021, The International Journal of Advanced Manufacturing Technology.

[17]  I. Jawahir,et al.  Optimization of Sustainable Machining of Ti6Al4V Alloy Using Genetic Algorithm for Minimized Carbon Emissions and Machining Costs, and Maximized Energy Efficiency and Human Health Benefits , 2021, Volume 2B: Advanced Manufacturing.

[18]  N. Talib,et al.  Comparative evaluation of crude Tamanu oil performance as metalworking fluids , 2021, Materials Today: Proceedings.

[19]  I. Jawahir,et al.  Analysis of slip-line model for serrated chip formation in orthogonal machining of AISI 304 stainless steel under various cooling/lubricating conditions , 2021, Journal of Manufacturing Processes.

[20]  S. Belhadi,et al.  Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel , 2021, The International Journal of Advanced Manufacturing Technology.

[21]  G. Królczyk,et al.  Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication , 2021 .

[22]  Zhanqiang Liu,et al.  Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800 , 2020 .

[23]  G. S. Dangayach,et al.  Assessment of jojoba as a pure and nano-fluid base oil in minimum quantity lubrication (MQL) hard-turning of Ti–6Al–4V: A step towards sustainable machining , 2020 .

[24]  S. Kumar,et al.  Investigate the effect of nano cutting fluid and cutting parameters under minimum quantity lubrication (MQL) on surface roughness in turning of DSS-2205 , 2020 .

[25]  P. Sivaiah,et al.  Identifying the effectiveness of manner of cryogenic coolant supply in different cryogenic cooling techniques in turning process—a review , 2020 .

[26]  R. Teimouri,et al.  Comprehensive study on effect of orthogonal turn-milling parameters on surface integrity of Inconel 718 considering production rate as constrain , 2020 .

[27]  G. Królczyk,et al.  In-house development of eco-friendly lubrication techniques (EMQL, Nanoparticles+EMQL and EL) for improving machining performance of 15–5 PHSS , 2020 .

[28]  Zhanqiang Liu,et al.  University of Birmingham Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel , 2020 .

[29]  Chetan,et al.  Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy , 2020 .

[30]  S. Datta,et al.  Effects of Cutting Speed on MQL Machining Performance of AISI 304 Stainless Steel Using Uncoated Carbide Insert: Application Potential of Coconut Oil and Rice Bran Oil as Cutting Fluids , 2020 .

[31]  I. Jawahir,et al.  Minimising carbon emissions and machining costs with improved human health in sustainable machining of austenitic stainless steel through multi-objective optimisation , 2020, International Journal of Sustainable Manufacturing.

[32]  Fatih Tüysüz,et al.  An in-depth review of theory of the TOPSIS method: An experimental analysis , 2020 .

[33]  The Outcome of Turning Factors on the Machining Characteristics While Turning 655M13 Steel Alloy using Tialn Coated Carbide Insert , 2020, International Journal of Engineering and Advanced Technology.

[34]  A. N.,et al.  A comprehensive investigation on the effect of flood and MQL coolant on the machinability and stress corrosion cracking of super duplex stainless steel , 2020 .

[35]  Á. R. Machado,et al.  MoS2 solid lubricant application in turning of AISI D6 hardened steel with PCBN tools , 2019, Journal of Manufacturing Processes.

[36]  N. Muthukrishnan,et al.  Evaluation of graphene based nano fluids with minimum quantity lubrication in turning of AISI D3 steel , 2019, SN Applied Sciences.

[37]  Yassmin Seid Ahmed,et al.  New observations on built-up edge structures for improving machining performance during the cutting of superduplex stainless steel , 2019, Tribology International.

[38]  Zhanqiang Liu,et al.  Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy , 2019, Materials.

[39]  P. Sivaiah,et al.  Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel , 2019, Measurement.

[40]  S. T. Ng,et al.  Approach to establish carbon emission benchmarking for construction materials , 2018, Carbon Management.

[41]  Jolanta B. Krolczyk,et al.  Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions , 2018, Measurement.

[42]  P. Sivaiah,et al.  Effect of cryogenic coolant on turning performance characteristics during machining of 17-4 PH stainless steel: A comparison with MQL, wet, dry machining , 2018 .

[43]  A. Sharma,et al.  Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation , 2018 .

[44]  A. Sharma,et al.  Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel , 2017 .

[45]  Amit Rai Dixit,et al.  Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning , 2017 .

[46]  L. N. López de Lacalle,et al.  Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304 , 2016 .

[47]  Pengyu Li,et al.  A quantitative approach to analyze carbon emissions of CNC-based machining systems , 2015, J. Intell. Manuf..

[48]  Denni Kurniawan,et al.  Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil , 2015 .

[49]  M. Mohanraj,et al.  Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method , 2014 .

[50]  Tarek Mabrouki,et al.  Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel , 2012 .

[51]  M. Kaladhar,et al.  Machining of austenitic stainless steels – a review , 2012 .

[52]  Antonio Carlos Hernandes,et al.  Effect of pH-induced nanopowder deagglomeration on sintering, microstructure and dielectric properties of Ba0.77Ca0.23TiO3 ceramics , 2012 .

[53]  M. Noordin,et al.  Feasibility of mild hard turning of stainless steel using coated carbide tool , 2012 .

[54]  D. Jianxin,et al.  Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels , 2011 .

[55]  Noordin Mohd Yusof,et al.  Hard Machining of Stainless Steel Using Wiper Coated Carbide: Tool Life and Surface Integrity , 2010 .

[56]  J. Pardal,et al.  Microstructural changes and corrosion resistance of AISI 310S steel exposed to 600–800 °C , 2009 .

[57]  S. Baskar,et al.  NSGA-II algorithm for multi-objective generation expansion planning problem , 2009 .

[58]  M. Anthony Xavior,et al.  Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel , 2009 .

[59]  Michela Simoncini,et al.  Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B , 2006 .

[60]  C. J. Luis Pérez,et al.  Surface roughness prediction by factorial design of experiments in turning processes , 2003 .

[61]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[62]  A. Shokrani,et al.  Comparison of machining performance under MQL and ultra-high voltage EMQL conditions based on tribological properties , 2021, Tribology International.

[63]  G. Perera,et al.  Experimental investigation of Minimum Quantity Lubrication (MQL) of coconut oil based Metal Working Fluid , 2020 .

[64]  S. A. Lawal,et al.  Analysis of the effect of sustainable lubricants in the turning of AISI 304 stainless steel , 2020 .

[65]  Naresh C. Deshpande,et al.  Machining Induced Surface Integrity Aspects of Stainless Steels: A Review , 2020 .

[66]  A. Sahoo,et al.  A Brief Review on Effects of Conventional and Nano Particle Based Machining Fluid on Machining Performance of Minimum Quantity Lubrication Machining , 2019, Materials Today: Proceedings.

[67]  I. Jawahir,et al.  Validation of the slip-line model for serrated chip formation in orthogonal turning under dry and MQL conditions , 2019, Procedia CIRP.

[68]  Kanagasabapathi,et al.  Influence of Process Parameters on the Machining Characteristics of Austensite Stainless Steel (AISI 304) , 2018 .

[69]  F. Klocke,et al.  Analysis of the dynamic chip formation process in turning , 2018 .

[70]  Yitian Peng,et al.  Probing the difference in friction performance between graphene and MoS2 by manipulating the silver nanowires , 2018, Journal of Materials Science.

[71]  Á. R. Machado,et al.  Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels , 2017 .

[72]  Denni Kurniawan,et al.  Use of Castor Oil as Cutting Fluid in Machining of Hardened Stainless Steel with Minimum Quantity of Lubricant , 2015 .

[73]  M. B. Bilgin.  INVESTIGATING THE EFFECTS OF CUTTING PARAMETERS ON THE BUILT-UP-LAYER AND BUILT-UP-EDGE FORMATION DURING THE MACHINING OF AISI 310 AUSTENITIC STAINLESS , 2015 .

[74]  M. A. Xavior.  Evaluating the machinability of AISI 304 stainless steel using alumina inserts , 2012 .

[75]  Ryutaro Tanaka,et al.  Turning of difficult-to-machine materials with actively driven rotary tool , 2010 .