High speed permanent magnet motor design and power loss analysis

This paper introduces the solution of a 150 kW high speed permanent magnet motor (HSPMM). The motor is studied with its design considerations concluded for high speed application at first; then the HSPMM air gap flux density is analytically calculated and verified by finite element method (FEM); the motor stator slot number and slot opening width are studied and investigated to obtain a desirable motor performance, then the optimized rotor pole arc pole pitch can also be employed to increase the fundamental component proportion in the motor back electromotive force (EMF), while the optimized rotor to reduce the power loss for HSPMM is also presented.

[1]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting , 1993 .

[2]  Andrea Cavagnino,et al.  High-Speed Electrical Machines: Technologies, Trends, and Developments , 2014, IEEE Transactions on Industrial Electronics.

[3]  Geun-Ho Lee,et al.  A Novel Rotor Configuration and Experimental Verification of Interior PM Synchronous Motor for High-Speed Applications , 2012, IEEE Transactions on Magnetics.

[4]  Z Kolondzovski,et al.  Power Limits of High-Speed Permanent-Magnet Electrical Machines for Compressor Applications , 2011, IEEE Transactions on Energy Conversion.

[5]  Li Weili,et al.  Influence of Rectifiers on High-Speed Permanent Magnet Generator Electromagnetic and Temperature Fields in Distributed Power Generation Systems , 2015, IEEE Transactions on Energy Conversion.

[6]  Jiancheng Fang,et al.  Multiphysics Design and Optimization of High-Speed Permanent-Magnet Electrical Machines for Air Blower Applications , 2016, IEEE Transactions on Industrial Electronics.

[7]  Ran Yi,et al.  Influence of Rotor-Sleeve Electromagnetic Characteristics on High-Speed Permanent-Magnet Generator , 2014, IEEE Transactions on Industrial Electronics.

[8]  David Gerada,et al.  A High-Speed Permanent-Magnet Machine for Fault-Tolerant Drivetrains , 2014, IEEE Transactions on Industrial Electronics.

[9]  A. Binder,et al.  Fixation of buried and surface-mounted magnets in high-speed permanent-magnet synchronous machines , 2005, IEEE Transactions on Industry Applications.

[10]  Shuangxia Niu,et al.  Eddy Current Reduction in High-Speed Machines and Eddy Current Loss Analysis With Multislice Time-Stepping Finite-Element Method , 2012, IEEE Transactions on Magnetics.

[11]  Cheng-Tsung Liu,et al.  Optimal Design of a High Speed SPM Motor for Machine Tool Applications , 2014, IEEE Transactions on Magnetics.

[12]  Z. Zhu,et al.  Improved analytical model for predicting the magnetic field distribution in brushless permanent-magnet machines , 2002 .

[13]  Bangcheng Han,et al.  Loss Calculation and Thermal Analysis of Rotors Supported by Active Magnetic Bearings for High-Speed Permanent-Magnet Electrical Machines , 2016, IEEE Transactions on Industrial Electronics.

[14]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field , 1993 .