Use of catalytic reforming to aid natural gas HCCI combustion in engines: experimental and modelling results of open-loop fuel reforming

Abstract The potential of the homogeneous charge compression ignition (HCCI) combustion process to deliver drastically reduced emissions of NO x and improved fuel economy from internal combustion engines is well known. The process is, however, difficult to initiate and control, especially when methane or natural gas are used as fuel. To aid the HCCI combustion of natural gas, hydrogen addition has been successfully used in this study. This hydrogen can be obtained from on-line reforming of natural gas. Methane reforming is achieved here by reaction with engine exhaust gas and air in a small scale monolith catalytic reactor. The benchmark quantity of H 2 required to enhance the feasibility and engine load range of HCCI combustion is 10%. For low temperature engine exhaust gas, typical for HCCI engine operating conditions, experiments show that additional air is needed to produce this quantity. Experimental results from an open-loop fuel exhaust gas reforming system are compared with two different models of basic thermodynamic equilibria calculations. At the low reactor inlet temperatures needed for the HCCI application (approx. 400 ∘ C ) the simplified three-reaction thermodynamic equilibrium model is in broad agreement with experimental results, while for medium ( 550 – 650 ∘ C ) inlet temperature reforming with extra air added, the high hydrogen yields predicted from the multi-component equilibrium model are difficult to achieve in a practical reformer.

[1]  A. Megaritis,et al.  Effect of Hydrogen Addition on Natural Gas HCCI Combustion , 2004 .

[2]  Rodney L. Borup,et al.  Equilibrium products from autothermal processes for generating hydrogen-rich fuel-cell feeds , 2004 .

[3]  P. Irving,et al.  Steam Reforming of Hydrocarbon Fuels , 2002 .

[4]  Hyun-Seog Roh,et al.  Hydrogen production for fuel cells through methane reforming at low temperatures , 2002 .

[5]  A. Megaritis,et al.  Hydrogen enrichment: A way to maintain combustion stability in a natural gas fuelled engine with exhaust gas recirculation, the potential of fuel reforming , 2001 .

[6]  Menderes Levent,et al.  Production of hydrogen-rich gases from steam reforming of methane in an automatic catalytic microreactor , 2003 .

[7]  Juliana Piña,et al.  Use of a heterogeneous two-dimensional model to improve the primary steam reformer performance , 2003 .

[8]  Miroslaw L. Wyszynski,et al.  Modelling the monolithic exhaust converter/fuel reformer reactor—a zonal approach , 2000 .

[9]  A. Megaritis,et al.  Low temperature exhaust gas fuel reforming of diesel fuel , 2004 .

[10]  M. Krumpelt,et al.  Hydrogen from hydrocarbon fuels for fuel cells , 2001 .

[11]  Keith D. King,et al.  Reforming of CH4 by partial oxidation: thermodynamic and kinetic analyses , 2001 .

[12]  R. Brück,et al.  Thermal Management of Close Coupled Catalysts , 1999 .

[13]  S. Fukada,et al.  Effects of temperature, oxygen-to-methane molar ratio and superficial gas velocity on partial oxidation of methane for hydrogen production , 2004 .

[14]  Miroslaw L. Wyszynski,et al.  Exhaust-Gas Reforming of Methane to Aid Natural Gas HCCI Combustion: Experimental Results of Open Loop Hydrogen Production and Basic Thermodynamic Analysis , 2004 .

[15]  Gary L. Borman,et al.  A COMPUTER PROGRAM FOR CALCULATING PROPERTIES OF EQUILIBRIUM COMBUSTION PRODUCTS WITH SOME APPLICATIONS TO I.C. ENGINES , 1975 .